[Mark R]

I was under the impression that you could pick whatever color you want to display for each of the drive modes. I even says you can do it on page 154 of the owner's manual.

I think I linked some colors when I first got the car, but I'm not sure. The dealer says you cannot pick the color for each drive mode. I think you can, but the display is not functioning properly and accepting my input.

What says the All-Knowing Collective here?

Thanks,

Mark R.
Albuquerque, NM

[nicktechla]

I could be wrong, but i think you can either set it to the default colors for the drive modes, or you can just pick your own color, not tied to a drive mode

[Gunkk]

Nick is correct.

Interior Spectrum Lighting
If equipped, this feature allows for
choosing the color of the interior
lighting in the vehicle.
To access, press { on the
faceplate, then touch LIGHTING to
display the settings screen.
Touch to select from the following:
OFF : Turns the feature off.
LIGHT STRIPS : Turns on standard
mode. Touch the light strip color to
select a color for the interior lighting.
SHOW MODE : When the shift
lever is in P (Park) (automatic
transmission) or the park brake is
applied (manual transmission),
touch to turn the feature on in colors
chosen by the vehicle. When the
shift lever is not in P (Park) or the
park brake is not applied, the
interior color will default to the last
active color selected in light
strips mode.
LINK TO DRIVE MODE : The light
color is matched to the color being
used for the drive mode

[Glen e]

each drive mode is hard wired to a color, you cannot change.

[Mark R]

That helps a bunch.

Thanks.

mark R.