09-15-2016, 04:58 PM | #1 |
Drives: 45th Anniversary 2SS Join Date: Dec 2011
Location: Frisco, Texas
Posts: 74
|
How many engine studs hold the lsa cover?
Looking to add the lsa cover to my conversion but not sure how many is needed? Thank you for the help
__________________
New LSA blower, 2.75" 6 rib Adm Pulley, Zl1 lid
Adm Lsa Install kit, Fast 65lb injectors, Adm Fpcm, Zl1 fuel pump, Lingenfelter Gt11 Cam, BTR .660 lift springs with titanium retainers, Ls7 lifters, ADM modified oil pump, Adm Race Intake for zl1, Adm race scoop, Ported throttle body, Stainless Works 1 7/8 headers, MOST IMPORTANTLY ADM BUILT & TUNED!! 595hp/540tq |
09-15-2016, 05:09 PM | #2 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
5 total but your factory valve covers have 4 on them already so you'll only need 1
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
09-15-2016, 05:27 PM | #3 |
Drives: 45th Anniversary 2SS Join Date: Dec 2011
Location: Frisco, Texas
Posts: 74
|
Thanks do they need blue or red loc-tite?
__________________
New LSA blower, 2.75" 6 rib Adm Pulley, Zl1 lid
Adm Lsa Install kit, Fast 65lb injectors, Adm Fpcm, Zl1 fuel pump, Lingenfelter Gt11 Cam, BTR .660 lift springs with titanium retainers, Ls7 lifters, ADM modified oil pump, Adm Race Intake for zl1, Adm race scoop, Ported throttle body, Stainless Works 1 7/8 headers, MOST IMPORTANTLY ADM BUILT & TUNED!! 595hp/540tq |
09-15-2016, 06:09 PM | #4 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
no they don't. they get torqued to 108 inch pounds
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
09-15-2016, 06:17 PM | #5 |
Drives: 45th Anniversary 2SS Join Date: Dec 2011
Location: Frisco, Texas
Posts: 74
|
Thank you sir
__________________
New LSA blower, 2.75" 6 rib Adm Pulley, Zl1 lid
Adm Lsa Install kit, Fast 65lb injectors, Adm Fpcm, Zl1 fuel pump, Lingenfelter Gt11 Cam, BTR .660 lift springs with titanium retainers, Ls7 lifters, ADM modified oil pump, Adm Race Intake for zl1, Adm race scoop, Ported throttle body, Stainless Works 1 7/8 headers, MOST IMPORTANTLY ADM BUILT & TUNED!! 595hp/540tq |
|
|
|
|