Race Ramps for zl1 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

butch32 · 04-30-2013, 10:54 PM

I would like to get the 2 piece ramps. Has anybody got them for the zl1 yet? And what length did you get the 56" or 67"? Thanks, Butch..

ZL1Dave · 04-30-2013, 10:58 PM

Myself and several guys have them and like them alot. You can save a few bucks and get away with the 56 inch

RiCorvette · 04-30-2013, 11:42 PM

I already had 12000# Rhino Ramps and wanted to make use of them for the Zed, so I secured a 5' (or so) length of 2x12, cut it in half at 45* and fashioned a 5* (or so) bevel on the other end with mallet, chisel and hand plane. I use a 3/8 bolt, loose fitting, to keep the wood from sliding off the ramp.
Works just fine.

Cybeast · 05-01-2013, 08:43 AM

Quote:

Originally Posted by butch32

I would like to get the 2 piece ramps. Has anybody got them for the zl1 yet? And what length did you get the 56" or 67"? Thanks, Butch..

Got 2 piece 67" and xtenders they work great. like 10" height 2" higher than 56" ones

DrkPhx · 05-01-2013, 08:45 AM

The 56" are close but work fine.

zfuzz · 05-01-2013, 09:30 AM

Ditto 56 inchers work like a champ!

THR ZL1 #1 · 05-01-2013, 11:00 AM

Love the Race Ramp product . . may be pricey . . but light as a feather, built well and made in the USA!

thespymaster · 05-01-2013, 11:11 AM

Quote:

Originally Posted by butch32

I would like to get the 2 piece ramps. Has anybody got them for the zl1 yet? And what length did you get the 56" or 67"? Thanks, Butch..

Its a crappy photo, but Ihave the 56" 2 piece ramps and they support the monster 22 X 13's in the rear!

OldScoolCamaro · 05-01-2013, 11:14 AM

Quote:

Originally Posted by butch32

I would like to get the 2 piece ramps. Has anybody got them for the zl1 yet? And what length did you get the 56" or 67"? Thanks, Butch..

I just got them, and they are great. I got the two piece set 67", and I changed the oil and gear lube. It clears nicely going up forward or backward, and it has substantial room underneath. There is a 20.00 manufacturers rebate right now for them.

butch32 · 05-02-2013, 12:42 AM

Thanks for all the help. I'm going with the 67" due to the extra height they offer.

djnice · 05-02-2013, 01:20 AM

Where are you guys buying them from?

Cybeast · 05-02-2013, 10:54 AM

Amazon lower price and free shipping

THR ZL1 #1 · 05-02-2013, 11:34 AM

Got mine from AutoAnything.com

Here are my 3" lifts to get better floor jack clearance.

DrkPhx · 05-02-2013, 06:44 PM

I bought mine from Reverse Logic. 10% discount and free shipping.

05-01-2013, 11:00 AM	#7
THR ZL1 #1 Perma Grinning Drives: 2012 Tom Henry Racing ZL1 Join Date: Feb 2012 Location: Schaumburg, IL Posts: 452	Love the Race Ramp product . . may be pricey . . but light as a feather, built well and made in the USA! __________________ Our Garage: 2018 Traverse High Country, 2017 Tom Henry Racing ZL1 Convertible, 2016 Silverado High Country HD, 2014 Camaro SS Convertible, 2012 Tom Henry Racing ZL1, 2002 Berger SS Phase II, 2001 Camaro SS Convertible, 1997 Hendrick Motorsports 30th Anniversary LT4 SS, 1992 Camaro RS Z03 25th . . .

05-02-2013, 01:20 AM	#11
djnice Drives: 13 ZL1 SIM, 99 Z28 Black Join Date: Feb 2013 Location: Spokane, WA Posts: 708	Where are you guys buying them from? __________________ 2018 C7 Z06 - WGG, M7. / 2013 ZL1 - SIM, 6 spd, RotoFab CAI, Can. / 1999 Z28 - Black, 6 spd, K&N, Subframe. / More Fun Stuff - www.inlandspeed.com

05-02-2013, 11:34 AM	#13
THR ZL1 #1 Perma Grinning Drives: 2012 Tom Henry Racing ZL1 Join Date: Feb 2012 Location: Schaumburg, IL Posts: 452	Got mine from AutoAnything.com Here are my 3" lifts to get better floor jack clearance. Attached Images

04-30-2013, 10:54 PM	#1
butch32 Drives: 2012 Zl1 and 2011 ss camaro Join Date: Jan 2011 Location: MI Posts: 28	Race Ramps for zl1 I would like to get the 2 piece ramps. Has anybody got them for the zl1 yet? And what length did you get the 56" or 67"? Thanks, Butch..

04-30-2013, 10:58 PM	#2
ZL1Dave Drives: 2012 ZL-1 #1442 Join Date: Apr 2012 Location: Phila. Pa Posts: 201	Myself and several guys have them and like them alot. You can save a few bucks and get away with the 56 inch

04-30-2013, 11:42 PM	#3
RiCorvette Drives: 2017 Corvette Grand Sport 3LT Join Date: Oct 2010 Location: Center of the known Universe Posts: 863	I already had 12000# Rhino Ramps and wanted to make use of them for the Zed, so I secured a 5' (or so) length of 2x12, cut it in half at 45* and fashioned a 5* (or so) bevel on the other end with mallet, chisel and hand plane. I use a 3/8 bolt, loose fitting, to keep the wood from sliding off the ramp. Works just fine.

05-01-2013, 08:45 AM	#5
DrkPhx Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011 Location: MN Posts: 2,250	The 56" are close but work fine.

05-01-2013, 09:30 AM	#6
zfuzz Drives: 69 Z28 / 12 ZL1 Join Date: Nov 2011 Location: Tennessee Posts: 409 View My Garage	Ditto 56 inchers work like a champ!

05-02-2013, 12:42 AM	#10
butch32 Drives: 2012 Zl1 and 2011 ss camaro Join Date: Jan 2011 Location: MI Posts: 28	Thanks for all the help. I'm going with the 67" due to the extra height they offer.

05-02-2013, 10:54 AM	#12
Cybeast Drives: 2013 Victory Red ZL1 #1562 Join Date: Jan 2013 Location: Iowa Posts: 75	Amazon lower price and free shipping

05-02-2013, 06:44 PM	#14
DrkPhx Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011 Location: MN Posts: 2,250	I bought mine from Reverse Logic. 10% discount and free shipping.