[AustinTXracer]

Seems the 325 SC3 is out of stock everywhere now :(

[AustinTXracer]

You guys running race wheels and daily wheels, are you running TPMS in both? How do you swap the car over to the other set?

[foshjowler]

Originally Posted by AustinTXracer

You guys running race wheels and daily wheels, are you running TPMS in both? How do you swap the car over to the other set?

Only TPMS in the daily wheels, just didn't want to spend the money on them for wheels that are only on a few days at a time. To change the wheels I use a floor jack, impact wrench to save time/effort, and a torque wrench to get the lug nuts to spec.

[apexit53]

Originally Posted by AustinTXracer

You guys running race wheels and daily wheels, are you running TPMS in both? How do you swap the car over to the other set?

TPMS only on OE wheels. Just deal with the light on with the race set.

[Ummpwr]

I bought a set of 4 Tpms sensors on eBay for $50 total. I use them in my 19in autox wheels to try the out and they have been working for the last 7mo. Also bought the tpms relearn tool on eBay for under $10

[AustinTXracer]

So then I guess the car doesn't actually need TPMS to operate correctly. No limp mode or TC/ESC related issues? If not, great!

[rotis]

Originally Posted by AustinTXracer

So then I guess the car doesn't actually need TPMS to operate correctly. No limp mode or TC/ESC related issues? If not, great!

If the car gets valid readings from all 4 sensors, you're good.

If it sees that there are 0 sensors, you're good.

If it sees 1-3 sensors, you have a TPMS fault and it will not permit you to disable stabilitrac.

[apexit53]

Originally Posted by rotis

If the car gets valid readings from all 4 sensors, you're good.

If it sees that there are 0 sensors, you're good.

If it sees 1-3 sensors, you have a TPMS fault and it will not permit you to disable stabilitrac.

This!

its all or nothing lol

[apexit53]

Videos from this weekends events. Need to work on the camera angle so you can see out of it better.... in a 6th get easier said than done lol

Day one was drying conditions, two slower areas had puddles on turn in still, but we made the most of it.


Day 2 was all dry, car felt good, messed up a but in the slalom but overall enough to take top pax

[Vtor_ZL1]

After long hiatus for.. reasons! We're back, slowly and carefully exercising our old tires. Due to camera malfunction.. err user error, there was only shot of my hand turning it on.. 7 times. Apparently time lapse mode does not reset to video mode when you power cycle the camera.. good and bad i guess. There a awesome curse laden tank slapper recorded on the PDR.

[rotis]

Last weekend in Packwood, car is feeling great after a few setup tweaks.

Day 1, was 2nd in overall PAX-

Day 2, our club only scores the first 3 runs but I forgot to turn off traction control on my 3rd run. This was my 4th run, which was top PAX -

[5inn]

Originally Posted by apexit53

Videos from this weekends events. Need to work on the camera angle so you can see out of it better.... in a 6th get easier said than done lol

Are you using a headrest mount for this view?

[apexit53]

Originally Posted by 5inn

Are you using a headrest mount for this view?

yeah, just need to raise the seat up or something.

[5inn]

Originally Posted by apexit53

yeah, just need to raise the seat up or something.

For sure. I'd also recommend changing your GoPro metering mode to 'spot', if you haven't already. When you mount it anywhere with an inside view of the car, the camera usually meters for the inside which causes the outside to be a bit overexposed.

I was trying to find an example on one of my videos. I think the best one is this one of my friend spinning my old '17 Si. It's bright and sunny outside but can see well, while inside is a bit dark, but still plenty usable.