?? ZL1 REAR

[2012LS3VERT]

Lol, I know the feeling!

[Jared91]

Refund time is right !! I have a zl1 diff just need everything else. Love to see all the options out there.

[H-E]

Originally Posted by Jared91

Refund time is right !! I have a zl1 diff just need everything else. Love to see all the options out there.

We can take care of you just give us a call

[Craig B]

Who has the best price on a ZL1 diff?

[H-E]

Originally Posted by Craig B

Who has the best price on a ZL1 diff?

We can get you the diff, i recommend going through your local dealer first, they will usually work with you if you let them no your a smart shopper.list is 2800, you shouldn't have a problem finding them for $2400 or less, you also save shipping if you buy local .Ill be glad to sell anyone the whole package but again i would recommend your local GM dealer.

[bowtienick]

I am also interested in this package seeing as I've blown my axles.

[H-E]

Originally Posted by bowtienick

I am also interested in this package seeing as I've blown my axles.

Great, just give me a call ......

[yotaman96]

Originally Posted by smokum

No on the axles. Need the zl1 axles. Diff bolts right in. No mod needed. Driveshaft would need to be measured. I don't run the diff cooler as of yet. I did the swap last week and love it. Cooler will be hooked up when i get the lines installed. You will need diff axles and bearing hubs and modify driveshaft if needed.

You don't have to get new hubs. I just installed a ZL1 diff and axles in mine and used the factory SS hubs.

[Craig B]

Originally Posted by yotaman96

You don't have to get new hubs. I just installed a ZL1 diff and axles in mine and used the factory SS hubs.

That's good to know, thanks.

[H-E]

Originally Posted by yotaman96

You don't have to get new hubs. I just installed a ZL1 diff and axles in mine and used the factory SS hubs.

Originally Posted by Craig B

That's good to know, thanks.

Correct. ...

[GFORCE1320]

Originally Posted by Craig B

I had some question about swapping over to a ZL1 rear diff. If I switched over could I use my axles? Will the rear diff bolt right in with no mods? The driveshaft need to be cut down ? I already have a DSS driveshaft and Gforce 1500 hp axles. Also would I need to run the Diff cooler or could I just cap it off. Thanks in advance.

I believe we answered your question on this, we would just need to make different inner stubs for the ZL1 diff, we also have a different driveshaft flange to fit it.

We don't get many requests for ZL1 axles but we have sold a few 9" kits to replace them.

Let me know if we can be of any help.

Thanks
Chris