Demodding Sale/Trade: Magnacharger, Headers, Clutch, Etc... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mwt18 · 06-21-2013, 12:03 PM

I've been trying to sell my car on Autotrader for a while, but I just can't find the right buyer. I've also taken the car to a couple of dealships, but they don't add any value to the modifications. So, instead of giving the stealership about $10K in free parts, I've decided to demod the car before the selling it. I've already removed most of the easy stuff that I had the stock parts to put back on. But, there are several stock parts I didn't keep, so I can't just swap them out.

These are the parts that are still on the car that I'd like to sell/trade:

Magnuson TVS 2300 Supercharger (I can't just remove this because I'm missing several OEM parts, i.e. pretty much every OEM part that was removed during the install and wasn't reused got tossed. I think the only thing that can't be removed that will be needed are the crank pins. We'd have to find these, which shouldn't be a big deal.)
Rotofab CAI (I didn't keep my original airbox or intake tube)
ZR1 Twin Disc Clutch / LPE flywheel (I didn't keep the OEM clutch, slave cylinder or flywheel)
Kook's 1-7/8" Long tube headers with Jet-Hot ceramic coating and hi-flow cats (I have my stock manifolds and cats, so I can easily remove these and sell seperately.)
MGW short throw shifter with composite race knob (I have the OEM shifter, so this can also be easily removed and sold seperately)

Is there any interest in doing a transplant for all or some of these parts? Basically take both cars to the same shop and have the parts removed from my car and installed on your car. I would obviously need the OEM parts off your car that aren't reused so they could be installed in my car.

Here's a couple pics of the engine bay.

**UPDATE**
The car is sold! See this thread for what is still up for sale: http://www.camaro5.com/forums/showth...65#post6719265
Everyhing else is gone!

45thAnniversary2SS · 06-21-2013, 12:28 PM

What are you looking for on top of OEM parts in terms of $$$?

pdiddy · 06-21-2013, 12:41 PM

I am intrested in this as well if you would PM me some details and prices.

Dunks Maro · 06-21-2013, 12:50 PM

How much do you want for the headers and cats? PM me a price shipped. Thanks!

mwt18 · 06-21-2013, 01:22 PM

Quote:

Originally Posted by 45thAnniversary2SS

What are you looking for on top of OEM parts in terms of $$$?

I'd like to have the transplant done by a professional shop, so we'd need to decide on a shop and get an estimate for labor. But, here are a couple of options:

Package A: Supercharger & CAI: $3,000 + OEM parts + labor
Package B: ZR1 Clutch & Flywheel: $500 + OEM parts + labor
Package C: Supercharger, CAI, Clutch, & Flywheel: $3,250 + OEM parts + labor
Package D: Supercharger, CAI, Headers, & Cats: $4,000 + OEM parts + labor
Package E: The Full Monty (Supercharger, CAI, Clutch, Flywheel, Headers, Cats, and Shifter): $4,500 + OEM parts + labor

Jason P · 06-21-2013, 01:59 PM

Smokin deal for someone. If you need a stock clutch and flywheel with 1500 miles on it, or a stock air box I could hook you up on that for super cheap, shipping would cost more than the parts.

11syn3rgy · 06-21-2013, 03:53 PM

Quote:

Originally Posted by mwt18

I'd like to have the transplant done by a professional shop, so we'd need to decide on a shop and get an estimate for labor. But, here are a couple of options:

Package A: Supercharger & CAI: $3,000 + OEM parts + labor
Package B: ZR1 Clutch & Flywheel: $500 + OEM parts + labor
Package C: Supercharger, CAI, Clutch, & Flywheel: $3,250 + OEM parts + labor
Package D: Supercharger, CAI, Headers, & Cats: $4,000 + OEM parts + labor
Package E: The Full Monty (Supercharger, CAI, Clutch, Flywheel, Headers, Cats, and Shifter): $4,500 + OEM parts + labor

I wish you lived closer, I'd love to swap your supercharger into my 2011 SS (L99). If you decide to make a run over to MN or WI for anything, let me know!

Top Off · 06-21-2013, 04:53 PM

Free bump if. If I only had 3G laying around.

Bobbyblue714 · 06-21-2013, 11:01 PM

Hey I'm really interested please give me a call Or pm me 714-862-3987 thanks

MR.CamaroSS · 06-24-2013, 12:35 AM

I am interested in a couple things pm me a price on the headers, cats and mgw shifter. Just curious if I was interested in swapping the supercharger out did u want my stock parts back on your car or did u want all new parts? Pm me your response thanks

c_LoW29 · 06-24-2013, 07:13 AM

now is when i wish I had 3k saved up and im local damnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

mwt18 · 06-24-2013, 11:00 AM

**UPDATE**

The car is sold! The headers and cats, and shifter were removed and are for sale. Everyhing else is gone!

Aqua_Blue_SS · 06-25-2013, 01:18 PM

Prices?

mwt18 · 06-26-2013, 03:36 PM

Quote:

Originally Posted by KRIS10's $ponsor

Prices?

See this thread:
http://www.camaro5.com/forums/showth...65#post6719265

06-21-2013, 12:03 PM	#1
mwt18 Drives: 2010 Camaro 2SS Join Date: Mar 2009 Location: Rockville, MD Posts: 235	Demodding Sale/Trade: Magnacharger, Headers, Clutch, Etc... I've been trying to sell my car on Autotrader for a while, but I just can't find the right buyer. I've also taken the car to a couple of dealships, but they don't add any value to the modifications. So, instead of giving the stealership about $10K in free parts, I've decided to demod the car before the selling it. I've already removed most of the easy stuff that I had the stock parts to put back on. But, there are several stock parts I didn't keep, so I can't just swap them out. These are the parts that are still on the car that I'd like to sell/trade: Magnuson TVS 2300 Supercharger (I can't just remove this because I'm missing several OEM parts, i.e. pretty much every OEM part that was removed during the install and wasn't reused got tossed. I think the only thing that can't be removed that will be needed are the crank pins. We'd have to find these, which shouldn't be a big deal.) Rotofab CAI (I didn't keep my original airbox or intake tube) ZR1 Twin Disc Clutch / LPE flywheel (I didn't keep the OEM clutch, slave cylinder or flywheel) Kook's 1-7/8" Long tube headers with Jet-Hot ceramic coating and hi-flow cats (I have my stock manifolds and cats, so I can easily remove these and sell seperately.) MGW short throw shifter with composite race knob (I have the OEM shifter, so this can also be easily removed and sold seperately) Is there any interest in doing a transplant for all or some of these parts? Basically take both cars to the same shop and have the parts removed from my car and installed on your car. I would obviously need the OEM parts off your car that aren't reused so they could be installed in my car. Here's a couple pics of the engine bay. UPDATE The car is sold! See this thread for what is still up for sale: http://www.camaro5.com/forums/showth...65#post6719265 Everyhing else is gone! Attached Images __________________ FOR SALE: - Maggie w/ 3.6" Pulley \| Kooks Coated 1 7/8" LT Headers \| Rotofab CAI \| MSD FPVB \| ZR1 Twin Disc Clutch / LPE flywheel \| MGW Short Throw Shifter \| Diablosport Trinity / PLX boost & AFR sensor modules \| TCI line-lock Last edited by mwt18; 06-26-2013 at 03:37 PM. Reason: update

06-21-2013, 12:28 PM	#2
45thAnniversary2SS Drives: 2012 45th Anniversary 2SS LS3 Join Date: Feb 2012 Location: Charlotte, NC Posts: 2,812 View My Garage	What are you looking for on top of OEM parts in terms of $$$? __________________

06-21-2013, 12:41 PM	#3
pdiddy Drives: 2011 2SS Join Date: Jun 2013 Location: Kansas City Posts: 997	I am intrested in this as well if you would PM me some details and prices. __________________ 2011 2SS,fti th400, ECS 1500, Flex Fuel, Boost built 376, squash fuel system

06-21-2013, 01:59 PM	#6
Jason P Drives: 2011 2ss Join Date: Oct 2012 Location: United States Posts: 272	Smokin deal for someone. If you need a stock clutch and flywheel with 1500 miles on it, or a stock air box I could hook you up on that for super cheap, shipping would cost more than the parts. __________________ 2011 2ss Ram twin plate ceramic clutch, Texas speed 418 LS3 235 /243 .621 / .624 cam, ported and polished heads with dual springs,magnum push rods, Hotchkis race pack, Stainless Power long tube headers with no cats, Magna Flo competition exhaust, lpe fuel pump, magnuson supercharger with overdrive and port matched blower plate, IW 8 rib pullies, AEM meth kit, id 850 injectors, 3 bar map, halltech cai, zl1 rear diff

06-24-2013, 11:00 AM	#12
mwt18 Drives: 2010 Camaro 2SS Join Date: Mar 2009 Location: Rockville, MD Posts: 235	UPDATE The car is sold! The headers and cats, and shifter were removed and are for sale. Everyhing else is gone! __________________ FOR SALE: - Maggie w/ 3.6" Pulley \| Kooks Coated 1 7/8" LT Headers \| Rotofab CAI \| MSD FPVB \| ZR1 Twin Disc Clutch / LPE flywheel \| MGW Short Throw Shifter \| Diablosport Trinity / PLX boost & AFR sensor modules \| TCI line-lock

06-21-2013, 12:50 PM	#4
Dunks Maro Drives: 2010 Camaro SS (Rally Yellow) Join Date: Mar 2013 Location: Elizabethtown, KY Posts: 47	How much do you want for the headers and cats? PM me a price shipped. Thanks!

06-21-2013, 04:53 PM	#8
Top Off Drives: 2012 LS3 1SS/RS Vert Join Date: Dec 2012 Location: Hamburg Posts: 371	Free bump if. If I only had 3G laying around.

06-21-2013, 11:01 PM	#9
Bobbyblue714 Drives: 2010 inferno orange camaro SS Join Date: Nov 2012 Location: Costa Mesa Posts: 160	Hey I'm really interested please give me a call Or pm me 714-862-3987 thanks

06-24-2013, 12:35 AM	#10
MR.CamaroSS Drives: 2010 Camaro 2SS/RS Join Date: Jan 2012 Location: dunkirk,Maryland Posts: 99	I am interested in a couple things pm me a price on the headers, cats and mgw shifter. Just curious if I was interested in swapping the supercharger out did u want my stock parts back on your car or did u want all new parts? Pm me your response thanks

06-24-2013, 07:13 AM	#11
c_LoW29 Drives: 2011 2SS/RS, 2010 Mustang GT Join Date: May 2010 Location: Slidell, LA Posts: 2,412 View My Garage	now is when i wish I had 3k saved up and im local damnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

06-25-2013, 01:18 PM	#13
Aqua_Blue_SS Drives: 2010 ABM 2SS/RS M6 Join Date: Feb 2013 Location: Baytown, TX Posts: 341	Prices?