[ULTRAZLS1]

Originally Posted by kropscamaro16

aFe Twisted Steel Tri-Y Headers Features:
•1-7/8” primary tubing which merge to 2-1/8” secondary tubes into a 3" collector
•4-2-1 Tri-Y designed headers
•3/8" thick, 304 stainless steel head flanges
•Optimized tube lengths improve flow and performance
•100% hand TIG-welded construction ensures optimal strength and durability
•Incorporates a second bung for either a wide-band O₂ gauge or auxiliary instrumentation
•Gasket set included
X-Pipe: (Street Version):
•Includes dual, hi-flow, metallic, 200 CPSI, stainless steel catalytic converters
•V-band flanges with included V-band clamps for a secure leak-free seal
•Incorporates an X-Pipe to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone
•This is a direct bolt on system when used with aFe Axle-Back P/N: 49-34068. Also fits stock exhaust system with minor cutting
Testing:
•In recent testing the “Street” version produced +24 horsepower and +27 lbs. x ft. of torque on our in house dyno. (Tested on a 2016 Chevrolet Camaro V8-6.2L w/aFe axle-back P/N: 49-34068)

http://afepower.com/afe-power-48-341...-street-series

Thanks but have you had your car dyno tuned? Any before and after #s?

[ULTRAZLS1]

That entire setup is the best sounding exhaust system I've ever heard bar none

[Blk16SS]

Originally Posted by Megahurtz

You don't need them, but the MSD ones are nice looking.

I have the MSD's on mine bro. It starts up seemingly quicker, the pipes aren't as black and sooty. MSD claims approx 400 ohms less resistance per wire however I've yet to back that up. I could snatched one off and ohm both for comparison. Less resistance should equal a hotter flame I would imagine..

[kropscamaro16]

Originally Posted by ULTRAZLS1

That entire setup is the best sounding exhaust system I've ever heard bar none

haha thanks and they dynod it after the mods but im getting a tune and dyno this friday

[ULTRAZLS1]

Originally Posted by kropscamaro16

haha thanks and they dynod it after the mods but im getting a tune and dyno this friday

If you don't mind could you post a thread with listed mods and numbers when you get done? A8 or m6?

How about a vid of sound too?

You have the catted system? Entire system with axleback?

They look like an honest company admitting only 4hp from the axleback. Not much to gain there regardless of brand.

Sorry all the ? But I'm picky. I want good sound but also good gains. I'm going to do full exhaust and e85 tune next year. Trying to get sorted. Hope to be in the low 11s stock converter stock intake manifold near full weight.

It's got to be the mix of h pipe and x pipe making it sound so good/different from the others. Others sound pretty good too. Even stock npp isn't bad. But the afe has that perfect deep growl that I love.

Thanks a lot

[kropscamaro16]

afe power intake headers and exhaust and catted headers will be getting 91 tune friday and will post up vids/results!

[ULTRAZLS1]

Originally Posted by kropscamaro16

afe power intake headers and exhaust and catted headers will be getting 91 tune friday and will post up vids/results!

Thanks !

[GirlyNFG]

I have the stock wires

[Atra]

I ordered the MSD wires. Not sure any of you have the same headers I do so I chose to listen to the enginerr XD.

[PRAY]

Originally Posted by kropscamaro16

afe power intake headers and exhaust and catted headers will be getting 91 tune friday and will post up vids/results!

The headers look really interesting. To bad there won't be an apples to apples test against the stock system. It appears the price of headers is never going to come down for these cars.

[Blk16SS]

Originally Posted by Atra

I ordered the MSD wires. Not sure any of you have the same headers I do so I chose to listen to the enginerr XD.

I have the 2inchers on the way. When they get in my hands I will send them to Oklahoma to get the Airborne 1700 coating put on them...

[Atra]

I have the 1 7/8. They are gonna recommend you get 45 degree wires in the instructions. The man who designed them told me to get wires. Jehan is a wizard so I listened.