What did you do to your 6th Gen Camaro today?! - Page 503

Mr_Jones · 05-31-2019, 11:56 AM

Started off the morning like always... Fending off mustangs

Cannon Green · 05-31-2019, 12:59 PM

In April 2019 I bought a brand new 2018 Camaro 1SS. On my SS I am following the GM Track specification for breaking in the engine as I got my first oil change at 500 miles and will do another at 1500. The spec is metallic gray with gray/white interior, dual mode performance exhaust. In less than a month I have cut the secondary cats out and replaced with straight pipe, tinted windows to 5%(no tint on windshield), expel clear paint protected the front end($$$$), custom Camaro SS license plate frame, and Oracle clear glass LED side markers. Most recently ordered a rear diffuser, rock/mud guards, and rear body extensions from Wildhammer Motorsports. Looking forward to showing the community my Camaro. Will post pictures and videos soon! Have a good day all!

Heres a link to my introduction!
https://www.camaro6.com/forums/showt...6#post10532566

I`m Batman · 05-31-2019, 01:33 PM

Quote:

Originally Posted by fadkar

...it was a PAIN getting the filter off... Bought and returned close to a dozen different tools until I finally found one that did the job.

I use one of these... For taking off only...

https://www.amazon.com/Innovant-Coax...gateway&sr=8-1

RicSimonis · 05-31-2019, 03:30 PM

Quote:

Originally Posted by Mr_Jones

Started off the morning like always... Fending off mustangs

That’s funny.

RLem619 · 05-31-2019, 11:24 PM

Quote:

Originally Posted by I`m Batman

I use one of these... For taking off only...

https://www.amazon.com/Innovant-Coax...gateway&sr=8-1

+1

I had to run to NAPA and grab one of these last week in the middle of changing my oil. Worked great.

Zman85 · 06-01-2019, 01:01 AM

Changed the Tail lights to the OEM black/clear ones, replaced 3rd brake light and side markers with blacked out LED ones. Changed the Camaro side badges, and changed bowties to OEM black bowties. Then a quick two bucket wash. Next up is installing the SEMA grill and then she gets new wheels, front splitter, side rockers panels and a rear diffuser for a full exhaust system Kooks LT into Borla S Type, quad tip. Likely going to replace the red SS badge with the black and chrome one as well. The project has only just begun!

fadkar · 06-01-2019, 10:14 AM

Quote:

Originally Posted by I`m Batman

I use one of these... For taking off only...

https://www.amazon.com/Innovant-Coax...gateway&sr=8-1

This is the type of product that FINALLY got the filter off for me! After doing so many runs to Walmart, AutoZone, and O'Reillys, I was about to give up, pour the new oil into the engine with the old filter, drive it to a shop and have them redo the oil change.

Thank God for this device!!!!! It's quite ingenious in the fact that it tightens as you turn the wrench. Wish I had known about it sooner lol. First oil change took me ~6-7 hours... Next one will take 20 mins...

YoungFamous · 06-02-2019, 12:44 AM

Just bought my 2SS from Dallas today!

RLem619 · 06-02-2019, 01:51 PM

Swapped out the stock pads for the Powerstop Z26 pads. Painted the calipers with the G2 caliper kit.

ItsChristianInHD · 06-02-2019, 02:44 PM

Quote:

Originally Posted by Zman85

Changed the Tail lights to the OEM black/clear ones, replaced 3rd brake light and side markers with blacked out LED ones. Changed the Camaro side badges, and changed bowties to OEM black bowties. Then a quick two bucket wash. Next up is installing the SEMA grill and then she gets new wheels, front splitter, side rockers panels and a rear diffuser for a full exhaust system Kooks LT into Borla S Type, quad tip. Likely going to replace the red SS badge with the black and chrome one as well. The project has only just begun!

Damn that looks so clean. I want the side emblems and the dark tail lamps!

Puddin · 06-02-2019, 04:51 PM

I did some emblem swapping this weekend.

BigC1066 · 06-02-2019, 09:23 PM

Washed, Clay bared, waxed everything but the hood. Have new hood vinyl coming in tomorrow. So no need to wax. it. Added blue to my hood heat exchangers too while I was at it.

MakCamaro · 06-03-2019, 02:09 AM

Quote:

Originally Posted by BigC1066

Washed, Clay bared, waxed everything but the hood. Have new hood vinyl coming in tomorrow. So no need to wax. it. Added blue to my hood heat exchangers too while I was at it.

I absolutely love the blue lights you fitted under your heat extractors! Can you post a picture how they look and how they were installed under the hood? Also do you have a link? They would look great with my mosaic black hood!

gpskinzhut · 06-03-2019, 09:31 AM

Got up at the ass-crack of dawn and finally got her washed. Christ, what a mess. First wash in like 6 months. Poor thing.

05-31-2019, 11:56 AM	#7029
Mr_Jones DaBatMan Drives: "Candi" 2018 2LT RS M6 Join Date: Mar 2019 Location: Jax, FL Posts: 51	Started off the morning like always... Fending off mustangs __________________ "As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride" MODS: husky floor liners / uniden r7 / plain jane otherwise... Current Wives: 2018 Camaro 2LT RS MT / 2008 Avalanche 5.3L AFM Ex-GF's: 2010 VW CC Lux 2.0T/ 2004 Mazda RX-8 GT MT/ 2001 A6 3.0T MT/ 2001 Navigator / 1995 Accord EX MT

06-01-2019, 01:01 AM	#7034
Zman85 Drives: 2017 Camaro SS Join Date: May 2019 Location: PA Posts: 10	Changed the Tail lights to the OEM black/clear ones, replaced 3rd brake light and side markers with blacked out LED ones. Changed the Camaro side badges, and changed bowties to OEM black bowties. Then a quick two bucket wash. Next up is installing the SEMA grill and then she gets new wheels, front splitter, side rockers panels and a rear diffuser for a full exhaust system Kooks LT into Borla S Type, quad tip. Likely going to replace the red SS badge with the black and chrome one as well. The project has only just begun! Attached Images

06-02-2019, 12:44 AM	#7036
YoungFamous Amos6.2Jr Drives: 21 A10 2SS 1LE Join Date: Apr 2017 Location: TX Posts: 206	Just Bought It Today Just bought my 2SS from Dallas today!

06-02-2019, 01:51 PM	#7037
RLem619 Drives: 2019 Camaro 2SS A10 Join Date: Feb 2019 Location: San Diego Posts: 207	Swapped out the stock pads for the Powerstop Z26 pads. Painted the calipers with the G2 caliper kit. Attached Images __________________ 2019 2SS: A10, Satin Steel Gray Metallic, MRC, Nav.

06-02-2019, 04:51 PM	#7039
Puddin Drives: 2016 Camaro 2SS Join Date: Apr 2018 Location: Central Texas Posts: 1,011	I did some emblem swapping this weekend. Attached Images

05-31-2019, 12:59 PM	#7030
Cannon Green Drives: 2018 Camaro 1SS Join Date: May 2019 Location: Southern Oregon Posts: 77	In April 2019 I bought a brand new 2018 Camaro 1SS. On my SS I am following the GM Track specification for breaking in the engine as I got my first oil change at 500 miles and will do another at 1500. The spec is metallic gray with gray/white interior, dual mode performance exhaust. In less than a month I have cut the secondary cats out and replaced with straight pipe, tinted windows to 5%(no tint on windshield), expel clear paint protected the front end($$$$), custom Camaro SS license plate frame, and Oracle clear glass LED side markers. Most recently ordered a rear diffuser, rock/mud guards, and rear body extensions from Wildhammer Motorsports. Looking forward to showing the community my Camaro. Will post pictures and videos soon! Have a good day all! Heres a link to my introduction! https://www.camaro6.com/forums/showt...6#post10532566

06-02-2019, 09:23 PM	#7040
BigC1066 Drives: 2016Chevrolet Camaro 2SS, 1966 C10 Join Date: Mar 2019 Location: TX Posts: 24 View My Garage	Washed, Clay bared, waxed everything but the hood. Have new hood vinyl coming in tomorrow. So no need to wax. it. Added blue to my hood heat exchangers too while I was at it. Attached Images

06-03-2019, 09:31 AM	#7042
gpskinzhut Drives: 2017 ZL1 A10 Join Date: Aug 2011 Location: Knoxville, TN Posts: 1,960 View My Garage	Got up at the ass-crack of dawn and finally got her washed. Christ, what a mess. First wash in like 6 months. Poor thing. __________________ 2017 ZL1 A10 2017 2SS M6: (SOLD) \|\| 2014 2LT Convertible: (SOLD) \|\| 2010 2LT M6 Supercharged:(SOLD) \|\| 1987 IROC-Z 5.0 M5: (SOLD)

User Name		Remember Me?
Password