[smurf_killer]

How do I program memory seats? I have pushed set button then 1 , held both at same time, and every other combo I could think it might be. I guess I’m not holding tongue right.

[squish72]

I had to do it a few times in a row for mine to stick. Going off memory put the seat where you want and hold the set and the number you want it saved as untill it beeps.

[ElwoodBlues]

Press and release the set button, you should here a beep. Then press and hold the 1 or 2 button until you hear 2 beeps.

https://www.chevrolet.com/how-to/memory-seats

[smurf_killer]

Thanks guys I’ll try it again several times in a row. It beeped before but didn’t save. But I also had to change and then reset and save the mirror tilt memory a few times for it to save

[RLem619]

Are you doing it while car is running or in accessory mode? I was having trouble while trying it without the car running. Tried it while it was running and was able to program 1 & 2, and exit position.

[smurf_killer]

Figured out prob was I just pushed the button and let go right away. The memory was programmed the whole time I just needed to hold the #1 button down. Oops used to ram and wife’s Jeep

[1hprush]

The easy enter/exit feature allows the seat to move back or forward upon entering or exiting the car, but the ebrake must be on for it to function.

[madscotsman]

I wish my 1SS 1LE had this. Do the memory seats have the option to move the seat all the way back when you turn off the vehicle? Wife had a KIA that did that and it was so nice for getting in and out.

[bobby35ny]

Originally Posted by madscotsman

I wish my 1SS 1LE had this. Do the memory seats have the option to move the seat all the way back when you turn off the vehicle? Wife had a KIA that did that and it was so nice for getting in and out.

yep!

[1hprush]

Originally Posted by madscotsman

I wish my 1SS 1LE had this. Do the memory seats have the option to move the seat all the way back when you turn off the vehicle? Wife had a KIA that did that and it was so nice for getting in and out.

Yes! Just engage the ebrake before you exit the car for it to function

[majik755]

I have a 2017 RS A8 and have no need to use the ebrake to activate the Easy Exit feature. Once I set it to "on" in the Vehicle Personalization function, it activates automatically when the car is turned off and I open the door. The manual says it will also activate if the car is turned off with the door open as well although I haven't tried that.

[Sweptwing]

Originally Posted by majik755

I have a 2017 RS A8 and have no need to use the ebrake to activate the Easy Exit feature. Once I set it to "on" in the Vehicle Personalization function, it activates automatically when the car is turned off and I open the door. The manual says it will also activate if the car is turned off with the door open as well although I haven't tried that.

The E brake is not required for the “easy exit” function but is required for the “reposition” in MANUAL models or PARK for automatic models.