01-22-2019, 07:36 PM | #1 |
Drives: 2017 Summit White ZL1 M6 Join Date: May 2017
Location: B'ham AL
Posts: 189
|
Valentine 1
So I recently moved to a county/city that seems to have a LEO with a speed detection device for every 5 people that live here lol.
So this is not a detector debate but for those that might use a V1 how and where did you wire into the power supply?
__________________
Roto Fab/ Kook's LT's,ported blower,removed lid baffle/ 103mm TB' lower pulley and tune.
651/660. |
01-22-2019, 07:44 PM | #2 |
Drives: 2018 ZL1/1LE Red Join Date: Oct 2013
Location: Cumming, GA
Posts: 321
|
I used a Gen5 DIY mirror tap.....nice and clean, works great. (Think it was about $45?). It is a plug-n-play in-line setup.
__________________
BobR
2018 ZL1 1LE (Red) - New Dec 2017 2015 ViperGT (Gunmetal w/Red stripes) 2013 ZR1 Anniversary 2014 ZL1 - BrightYellow, 6sp 2011 Porsche GT3RS - White w/red graphics 2009 Porsche C2S 2001 Ferrari 360 |
01-22-2019, 07:52 PM | #3 |
Drives: 2018 ZLE Join Date: Apr 2018
Location: Des Moines
Posts: 227
|
This
__________________
2018 ZL1 1LE (CARBON/PDR/NAV)
|
01-22-2019, 08:15 PM | #4 |
Drives: Gen V Viper GTS Join Date: Jan 2018
Location: SoCal
Posts: 260
|
Plus get a Blendmount mirror mount. They may also sell the tap-in. This is a solid, OEM-looking device.
|
01-22-2019, 08:16 PM | #5 |
Drives: 2017 Summit White ZL1 M6 Join Date: May 2017
Location: B'ham AL
Posts: 189
|
Were did y’all source these please?
__________________
Roto Fab/ Kook's LT's,ported blower,removed lid baffle/ 103mm TB' lower pulley and tune.
651/660. |
01-22-2019, 11:20 PM | #6 |
Drives: 2012 Porsche 911 Turbo S Join Date: Jan 2017
Location: Los Angeles, CA
Posts: 1,776
|
I use the gen5diy harness and a blendmount mount
https://www.gen5diy.com/collections/...tector-harness
__________________
IG: 2fast2nick
-- Current -- 2012 Porsche Turbo S - PDK - Basalt Black Metallic -- Past -- 2017 Camaro ZL1 Coupe - Red Hot - A10, PDR - HRE P101 2015 Mustang GT PP - Whipple Supercharger |
01-23-2019, 06:57 AM | #7 |
Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
I mounted mine high up as you are supposed to and routed wires to the left towards driver side and back up to the port.
__________________
🔺22 RS E TRON GT
🔺21 Model S Plaid |
01-23-2019, 11:03 AM | #8 |
Gen5 DIY harness and Blendmount.
If you plan to connect the V1 to your phone (recommended) get the harness for the V1 and dongle. https://www.gen5diy.com/collections/...uetooth-dongle |
|
01-23-2019, 12:56 PM | #9 |
Drives: 2018 Nightfall Gray Metalic ZL1 A10 Join Date: Feb 2018
Location: SFLA
Posts: 154
|
Used this tap from amazon for my Uniden R3.
Worked perfect and looks super clean and OEM: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 There is a video somewhere of where and how to tap into. Way cheaper and (IMHO) just as good |
01-23-2019, 02:01 PM | #10 | |
Drives: 2018 ZL1 Join Date: Nov 2018
Location: Albuquerque NM
Posts: 3
|
Quote:
|
|
|
|
Post Reply
|
|
|