ZL1 stone/splash guards - Page 28

ZL1Boomer · 01-18-2019, 12:30 PM

ACS installed. After questioning the stability, ACS told me the key was to push on the back of wheel well felt as you pump rivet gun. So I took out bottom plug on wheel well and after aligning and drilling the holes, pulled the felt out to get my hand behind as I did the rivets. Couldn’t get the bottom plug back in as it’s covered by rock guard now but don’t think it will be a problem. They feel solid. And yes my tire is wacked. Car was a repo and they never had correct pressure for 8K miles. But got a great deal. Hope I do pictures correctly.

meSSohappy · 01-18-2019, 03:17 PM

Looks good !

meSSohappy · 01-18-2019, 03:23 PM

Quote:

Originally Posted by 2018ZL1

Count me in for the rears as well! Just bought the fronts and they look waaaaaaaay better than the ZL1 addon ones!!!

Added you to the list.

List updated.

2017-ZL1 · 01-19-2019, 07:45 AM

I installed the ZL1 Addons. Mine did come with black hardware which is easily addressed either way. The small gap in the rear doesn't bother me. Nothing a short piece of 1/4" foam insulation tape want fill. Easy to install. I never removed any tire at all. Rear was installed using a 1/4' gear wrench with a T15. About 45 minutes for all 4 corners.

meSSohappy · 01-19-2019, 10:20 AM

Quote:

Originally Posted by 2017-ZL1

I installed the ZL1 Addons. Mine did come with black hardware which is easily addressed either way. The small gap in the rear doesn't bother me. Nothing a short piece of 1/4" foam insulation tape want fill. Easy to install. I never removed any tire at all. Rear was installed using a 1/4' gear wrench with a T15. About 45 minutes for all 4 corners.

This exactly what I did. The foam tape attracts debris and doesn’t last long. Also looks like shit on a beauty car. Looking forward to this ACS upgrade.

meSSohappy · 01-22-2019, 06:08 PM

Check out this link. Its for the gen6 Camaro rock guard install front and rear. Keep in mind this is not for the ZL1, but informative all the same. The fronts install the same. Wont know about the rears until they are made.

https://acscomposite.us7.list-manage...6&e=baf54be425

JSAVILLE · 01-23-2019, 06:35 PM

Are the rears available yet???? I haven't been on the site for a while. I have order the fronts and received them.
Thanks a lot

FunChevy · 01-27-2019, 01:39 PM

Quote:

Originally Posted by meSSohappy

Added you to the list.

List updated.

Ordered the fronts. Please add me for rear set.

No change in fit for 19 ZL in back?

c

meSSohappy · 01-28-2019, 10:24 AM

Quote:

Originally Posted by FunChevy

Ordered the fronts. Please add me for rear set.

No change in fit for 19 ZL in back?

c

Added you to List ! Thanks !

meSSohappy · 01-28-2019, 10:25 AM

Design phase is complete and tooling is underway. Hopefully production will start soon

Mcardenal · 01-28-2019, 04:54 PM

Quote:

Originally Posted by meSSohappy

Design phase is complete and tooling is underway. Hopefully production will start soon

woohoo!

7LitreC5 · 01-28-2019, 07:50 PM

Nice. Thanks for the update.

Quote:

Originally Posted by meSSohappy

Design phase is complete and tooling is underway. Hopefully production will start soon

RandRZL1 · 01-28-2019, 07:58 PM

Can’t wait!!!!

Ten4Lou · 01-29-2019, 07:22 AM

Question... do these front flares (ACS) prevent how the front tires spray water all over the side doors and rear fenders when the roads are wet? I’ve been on the fence with buying these but may pull the trigger if that problem is eliminated.

For those who have them, what’s your experience?

Kind Regards,
Lou

01-18-2019, 12:30 PM	#379
ZL1Boomer Drives: 2014 ZL1 Join Date: Jun 2015 Location: Treasure Coast Florida Posts: 24	ACS installed. After questioning the stability, ACS told me the key was to push on the back of wheel well felt as you pump rivet gun. So I took out bottom plug on wheel well and after aligning and drilling the holes, pulled the felt out to get my hand behind as I did the rivets. Couldn’t get the bottom plug back in as it’s covered by rock guard now but don’t think it will be a problem. They feel solid. And yes my tire is wacked. Car was a repo and they never had correct pressure for 8K miles. But got a great deal. Hope I do pictures correctly. Attached Images

01-18-2019, 03:17 PM	#380
meSSohappy Drives: 2018 ZL1 A10 Join Date: May 2012 Location: British Columbia, Canada Posts: 1,372	Looks good ! __________________ DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race

01-22-2019, 06:08 PM	#384
meSSohappy Drives: 2018 ZL1 A10 Join Date: May 2012 Location: British Columbia, Canada Posts: 1,372	Check out this link. Its for the gen6 Camaro rock guard install front and rear. Keep in mind this is not for the ZL1, but informative all the same. The fronts install the same. Wont know about the rears until they are made. https://acscomposite.us7.list-manage...6&e=baf54be425 __________________ DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race

01-28-2019, 10:25 AM	#388
meSSohappy Drives: 2018 ZL1 A10 Join Date: May 2012 Location: British Columbia, Canada Posts: 1,372	Design phase is complete and tooling is underway. Hopefully production will start soon __________________ DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race

01-19-2019, 07:45 AM	#382
2017-ZL1 Drives: 2017 Red Hot ZL1 Join Date: Dec 2017 Location: SC Posts: 32	I installed the ZL1 Addons. Mine did come with black hardware which is easily addressed either way. The small gap in the rear doesn't bother me. Nothing a short piece of 1/4" foam insulation tape want fill. Easy to install. I never removed any tire at all. Rear was installed using a 1/4' gear wrench with a T15. About 45 minutes for all 4 corners.

01-23-2019, 06:35 PM	#385
JSAVILLE Drives: 2018 ZL1 Vert. A10 Join Date: May 2018 Location: Baker, WV Posts: 23	Are the rears available yet???? I haven't been on the site for a while. I have order the fronts and received them. Thanks a lot

01-28-2019, 07:58 PM	#391
RandRZL1 Drives: 2018 ZL1 Join Date: Dec 2017 Location: Western Washington Posts: 150	Can’t wait!!!!

01-29-2019, 07:22 AM	#392
Ten4Lou Drives: 2018 ZL1 NGM Join Date: Jan 2018 Location: Magnolia, TX Posts: 43	Question... do these front flares (ACS) prevent how the front tires spray water all over the side doors and rear fenders when the roads are wet? I’ve been on the fence with buying these but may pull the trigger if that problem is eliminated. For those who have them, what’s your experience? Kind Regards, Lou

User Name		Remember Me?
Password