Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > V8 LT1 Engine, Exhaust, and Bolt-Ons


BeckyD @ James Martin Chevy


Post Reply
 
Thread Tools
Old 03-28-2020, 09:45 PM   #1
17camaroSS
 
17camaroSS's Avatar
 
Drives: Chevy Camaro SS
Join Date: Nov 2019
Location: Indiana
Posts: 80
Hi Ram question.

So, Iíve got the Hi Ram put on last weekend. As of now the car has factory manifolds with cat deletes, hooker x pipe, smoothed the factory airbox and dimpled it, green filter, Hi Ram, 95mm throttle body flex fuel sensor. I know, I did things a little different, but I did it that way to be different. Now my question is, what are others seeing for gains out of the Hi-Ram? The car is going on the dyno next Sunday for a tune. Iím just curious to see/hear what people are gaining. Thanks!
Attached Images
 
17camaroSS is offline   Reply With Quote
Old 03-29-2020, 09:36 AM   #2
oldman


 
Drives: SS 6 speed of course
Join Date: Jan 2016
Location: austin
Posts: 3,904
need pics of engine! I have not see a dyno of a hiram on stock cam and /or heads. Looks bad action though.
__________________
2016 to 2017 Stage 1, FBO, ported MSD, 103 TB, E85

2018 Stage 2, P1C, 4.0 pulley, Pray ported heads, Pray stage 1 blower cam, TxSpeed valvetrain, Katech ported 87mm TB, ported MSD, 1 and 7/8 headers

2019 stage 3: Forged short block 11.5 CR, huge duration sub .600 lift Cam Motion cam, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, 2 BOVs, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0, CA-offroad pipe, 60609 Borla, Lingenfelter injectors, ZL1 driveshaft and half shafts, Katech ported TB,MSD intake, BTR valvetrain.
oldman is offline   Reply With Quote
Old 03-29-2020, 02:43 PM   #3
17camaroSS
 
17camaroSS's Avatar
 
Drives: Chevy Camaro SS
Join Date: Nov 2019
Location: Indiana
Posts: 80
Quote:
Originally Posted by oldman View Post
need pics of engine! I have not see a dyno of a hiram on stock cam and /or heads. Looks bad action though.
Thanks man, I just wanted to do what most donít just to see what the results were. After I see what it runs Iíll be putting the cam in, stock ported heads, and 2Ē longtubes. Hereís a picture of the bay. Its not the best picture though lol.
Attached Images
   
17camaroSS is offline   Reply With Quote
Old 03-29-2020, 02:53 PM   #4
Paintslinger16
Two Lane Blacktop
 
Paintslinger16's Avatar
 
Drives: '18 Camaro 2SS
Join Date: Jul 2019
Location: Black River, NNY
Posts: 202
I was wondering what it would look like!
Paintslinger16 is offline   Reply With Quote
Old 03-29-2020, 03:52 PM   #5
17camaroSS
 
17camaroSS's Avatar
 
Drives: Chevy Camaro SS
Join Date: Nov 2019
Location: Indiana
Posts: 80
Quote:
Originally Posted by Paintslinger16 View Post
I was wondering what it would look like!
Yea haha. I deleted the sound tube and plugged the hole in the elbow. Turned out pretty good. Didnít know for sure if I was going to be able to use the factory tube until I went and put it on haha.
17camaroSS is offline   Reply With Quote
Old 03-29-2020, 03:58 PM   #6
Paintslinger16
Two Lane Blacktop
 
Paintslinger16's Avatar
 
Drives: '18 Camaro 2SS
Join Date: Jul 2019
Location: Black River, NNY
Posts: 202
What’s the plan for the hood as is or small scoop?
Paintslinger16 is offline   Reply With Quote
Old 03-29-2020, 07:30 PM   #7
17camaroSS
 
17camaroSS's Avatar
 
Drives: Chevy Camaro SS
Join Date: Nov 2019
Location: Indiana
Posts: 80
Quote:
Originally Posted by Paintslinger16 View Post
Whatís the plan for the hood as is or small scoop?
Iím going to keep it as is for now. May pick up a VFN hood for it later.
17camaroSS is offline   Reply With Quote
Old 03-29-2020, 08:01 PM   #8
oldman


 
Drives: SS 6 speed of course
Join Date: Jan 2016
Location: austin
Posts: 3,904
Reminds me of the tunnel ram days. The Vette I saw at the last Austin get together just had his hood cut with the highram sticking out... was cool
__________________
2016 to 2017 Stage 1, FBO, ported MSD, 103 TB, E85

2018 Stage 2, P1C, 4.0 pulley, Pray ported heads, Pray stage 1 blower cam, TxSpeed valvetrain, Katech ported 87mm TB, ported MSD, 1 and 7/8 headers

2019 stage 3: Forged short block 11.5 CR, huge duration sub .600 lift Cam Motion cam, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, 2 BOVs, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0, CA-offroad pipe, 60609 Borla, Lingenfelter injectors, ZL1 driveshaft and half shafts, Katech ported TB,MSD intake, BTR valvetrain.
oldman is offline   Reply With Quote
Old 03-29-2020, 08:26 PM   #9
oldman


 
Drives: SS 6 speed of course
Join Date: Jan 2016
Location: austin
Posts: 3,904


just saying..

https://www.dragzine.com/news/brando...camaro-record/

small birds should be afraid...
__________________
2016 to 2017 Stage 1, FBO, ported MSD, 103 TB, E85

2018 Stage 2, P1C, 4.0 pulley, Pray ported heads, Pray stage 1 blower cam, TxSpeed valvetrain, Katech ported 87mm TB, ported MSD, 1 and 7/8 headers

2019 stage 3: Forged short block 11.5 CR, huge duration sub .600 lift Cam Motion cam, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, 2 BOVs, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0, CA-offroad pipe, 60609 Borla, Lingenfelter injectors, ZL1 driveshaft and half shafts, Katech ported TB,MSD intake, BTR valvetrain.
oldman is offline   Reply With Quote
Old 03-29-2020, 09:00 PM   #10
17camaroSS
 
17camaroSS's Avatar
 
Drives: Chevy Camaro SS
Join Date: Nov 2019
Location: Indiana
Posts: 80
Lmao. Yea, I like the look a lot the way it sits.
17camaroSS is offline   Reply With Quote
Old 03-30-2020, 12:31 AM   #11
oldman


 
Drives: SS 6 speed of course
Join Date: Jan 2016
Location: austin
Posts: 3,904
I'd cut my hood then air brush a gooblied eyed monster with long nose (intake tube) ripping out of my hood...
__________________
2016 to 2017 Stage 1, FBO, ported MSD, 103 TB, E85

2018 Stage 2, P1C, 4.0 pulley, Pray ported heads, Pray stage 1 blower cam, TxSpeed valvetrain, Katech ported 87mm TB, ported MSD, 1 and 7/8 headers

2019 stage 3: Forged short block 11.5 CR, huge duration sub .600 lift Cam Motion cam, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, 2 BOVs, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0, CA-offroad pipe, 60609 Borla, Lingenfelter injectors, ZL1 driveshaft and half shafts, Katech ported TB,MSD intake, BTR valvetrain.
oldman is offline   Reply With Quote
Old 03-30-2020, 10:30 AM   #12
Bohanan23
 
Drives: 2016 Camaro 2SS A8
Join Date: Dec 2019
Location: Moore, OK
Posts: 88
Man I'm ready to see how it does! My 2" headers are showing up today. Might jump on a high ram for nest upgrade
Bohanan23 is offline   Reply With Quote
Old 03-30-2020, 07:41 PM   #13
17camaroSS
 
17camaroSS's Avatar
 
Drives: Chevy Camaro SS
Join Date: Nov 2019
Location: Indiana
Posts: 80
Quote:
Originally Posted by Bohanan23 View Post
Man I'm ready to see how it does! My 2" headers are showing up today. Might jump on a high ram for nest upgrade
Iíll find out on Sunday!!
17camaroSS is offline   Reply With Quote
Old 03-30-2020, 07:42 PM   #14
17camaroSS
 
17camaroSS's Avatar
 
Drives: Chevy Camaro SS
Join Date: Nov 2019
Location: Indiana
Posts: 80
Quote:
Originally Posted by oldman View Post
I'd cut my hood then air brush a gooblied eyed monster with long nose (intake tube) ripping out of my hood...
Thatís different!
17camaroSS is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:47 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.