SS 1LE Wing Parts

Vivid_SS_1LE · 12-11-2023, 08:57 PM

Does anyone know the latest part numbers for the SS 1LE wing and end pieces?

Since the end pieces are notorious for coming loose if not installed right, I figured it wouldn't hurt to have spares.

Briland_1LE · 12-12-2023, 06:26 AM

I don't think there is much of a point with having spares for that honestly. Feel them and if it feels like there is a lot of play and you could just pull it off with little effort then push it down firmly and that should restick it on.

Worst case scenario get some 3m double sided tape, pull it off and put the new tape on the bottom and restick it down.

That must be a rare instance where a dealer didn't stick it down right but it would be obvious if that were the case when you looked at it and felt it.

12-11-2023, 08:57 PM	#1
Vivid_SS_1LE Drives: Chevy Camaro SS 1LE Join Date: Jul 2023 Location: Middle TN Posts: 2	SS 1LE Wing Parts Does anyone know the latest part numbers for the SS 1LE wing and end pieces? Since the end pieces are notorious for coming loose if not installed right, I figured it wouldn't hurt to have spares.

12-12-2023, 06:26 AM	#2
Briland_1LE Drives: 2020 Camaro SS 1LE Join Date: Apr 2022 Location: Miami Posts: 227	I don't think there is much of a point with having spares for that honestly. Feel them and if it feels like there is a lot of play and you could just pull it off with little effort then push it down firmly and that should restick it on. Worst case scenario get some 3m double sided tape, pull it off and put the new tape on the bottom and restick it down. That must be a rare instance where a dealer didn't stick it down right but it would be obvious if that were the case when you looked at it and felt it.

User Name		Remember Me?
Password