07-07-2023, 10:42 AM | #1 |
Drives: Chevy Silverado Join Date: Jul 2023
Location: MS
Posts: 4
|
2010 Camaro going for 9s
Hey guys,
Got a customer did a 416ci engine for that is 12.2 compression with LS3 heads that have been CNC'd Intake and exhaust runners along with being milled .020". 244/256 .624/.604 112+4 cam BTR Equalizer intake / 102mm Throttle body 2" headers to 3.5" collectors C85 Fuel In the process of doing a 4L80E swap in the car and have the Circle D 4500 converter ordered and waiting on 4.10s and a Trutrac for the car. Got this far and now he comes up with this that he wants to break into the 9s. I told him thats easy in the 1/8th mile I looked at the 1/4 mile list and seen Rhino went 9s with a 417/4l80/4.10s so i see its possible. Cam Motion told me this cam will take about a 150 shot so going to see what it will do on motor and go from there i guess. Hate when folks come up with these goals almost after the work is done. The car has all the fancy red suspension parts and double adjustable coil overs. So whats it take to get these cars to break into the 9s? I wanted to put a Holley ECU on the car to do progressive dry nitrous with traction control but he didnt want to go through all that, so here we are. |
07-09-2023, 09:53 AM | #2 |
Drives: 2010 Camaro SS/RS Twin Turbo Join Date: Dec 2022
Location: Clearwater FL
Posts: 15
|
I went 9.9 @ 135 with a twin turbo Camaro.4140 lb. race weight with me in it.Thats around 750 rwhp and 1.4 to high 1.3 60 ft.
__________________
2010 Camaro SS 416 Twin Turbo,4L80E trans,ZL1 rear.1065 rwhp.9.03@154 1/4 mile so far.
|
|
|
|
|