CPR built zl1 792/790 max effort on the 1.7 blower - Page 2

NicD · 08-22-2018, 07:18 PM

Quote:

Originally Posted by Silver Spear

Check this web site ( https://www.pure-gas.org/index.jsp?stateprov=AR ) for high octane fuel.

What he meant was that in AZ we only have 91 octane as the highest octane fuel at normal fuel pumps. Since he is flex fuel the only thing he is going to be looking for when wanting to make more power is E85/E54 not race gas.

NicD · 08-22-2018, 07:21 PM

So damn hard not to modify the ZL1 right now when I see all of these cool builds every day, too many projects taking up too much time and money! A setup like this is just about perfect if you are keeping the stock blower. Otherwise step it up to a TVS 2300, Whipple, or wait for the 2650s to start showing up at some point and watch the numbers jump even more.

cann1x · 08-22-2018, 09:24 PM

Quote:

Originally Posted by newchevyman

Saw this and the C7Z they built recently, very impressive. Hope there's going to be some videos of it on the street/track!

ill get some footage for SCT in october!

cann1x · 08-22-2018, 09:26 PM

Quote:

Originally Posted by LT4 650

Very strong...damn that things sounds good.

A10 or M6?

I guess that equates to about 930hp at the crank???

A10 good sir

cann1x · 08-22-2018, 09:27 PM

Quote:

Originally Posted by conradsteph

Great numbers cann1x! - I'm scheduled for Cordes in two weeks for Kong blower, low side fuel, and flex. Should be right on your tail. Such a great color. Congrats!

come out to the half mile event, we will get some kickass photos!

cann1x · 08-22-2018, 09:35 PM

Quote:

Originally Posted by LiqTenExp

What happens on back to back pulls?

consistent as it gained very little being iced down

cann1x · 08-22-2018, 09:37 PM

Quote:

Originally Posted by NicD

So damn hard not to modify the ZL1 right now when I see all of these cool builds every day, too many projects taking up too much time and money! A setup like this is just about perfect if you are keeping the stock blower. Otherwise step it up to a TVS 2300, Whipple, or wait for the 2650s to start showing up at some point and watch the numbers jump even more.

come join the dark side haha jk. I can't wait to see your vette build that thing is going to hurt some feelings

20181le · 08-22-2018, 10:42 PM

Andrew does amazing work!

Chris Edwards · 08-23-2018, 12:38 AM

How does it put the power down with stock tires?

cann1x · 08-23-2018, 01:15 AM

Quote:

Originally Posted by Chris Edwards

How does it put the power down with stock tires?

It doesn't I'm pegged at the limiter till like 80ish. But I have a set of 17 welds with a mickey et street r in the garage and skinnys on the way for SCT in October

newchevyman · 12-13-2018, 03:48 AM

Any updates on this car, quarter or half mile results?

laynlo15 · 12-13-2018, 10:36 AM

Great number, car sounds awesome.

TripleBlkZL1 · 12-13-2018, 03:09 PM

How much boost are you running? I’m making 749rwhp and 743rwtq on 100 octane. I have a pretty similar build but no meth, no e85, no ice tank, stock low side, roto fab intake, and stock upper pulley (15% lower pulley). My next mod is the weaponx trunk tank and maybe the new roto fab 5” intake.

cann1x · 12-15-2018, 01:44 AM

Quote:

Originally Posted by newchevyman

Any updates on this car, quarter or half mile results?

car is getting some body work at the moment so I haven't been out in this cool weather, but my first time out at the strip was street car take over back in October in PHX. car did 10.29 at 136, 1.56 60ft. was 90 degrees during the day and ~2000 DA no ice

08-22-2018, 07:21 PM	#16
NicD Drives: Camaro Join Date: Mar 2017 Location: Phoenix, AZ Posts: 157	So damn hard not to modify the ZL1 right now when I see all of these cool builds every day, too many projects taking up too much time and money! A setup like this is just about perfect if you are keeping the stock blower. Otherwise step it up to a TVS 2300, Whipple, or wait for the 2650s to start showing up at some point and watch the numbers jump even more. __________________ 19 ZR1 \| 16 Viper GT \| 09 Z06 \| 94 LS1 GT \| 16 Denali \| 19 CTS http://www.gonicd.com

12-13-2018, 03:48 AM	#25
newchevyman Drives: 2017 Camero ZL1 Join Date: Nov 2015 Location: Texas Posts: 130	Any updates on this car, quarter or half mile results? __________________ 2017 ZL1 A10 Dyno/Quarter Mile/Dragy 9.71@141.2 MPH so far. 2007 Z06 H/C/I/E Half Mile - 169 MPH. Sold.

12-13-2018, 10:36 AM	#26
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Great number, car sounds awesome. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

12-13-2018, 03:09 PM	#27
TripleBlkZL1 Drives: 18 ZL1 A10 & 18 2500HD Duramax Join Date: Oct 2012 Location: Chicago, IL Posts: 733 View My Garage	How much boost are you running? I’m making 749rwhp and 743rwtq on 100 octane. I have a pretty similar build but no meth, no e85, no ice tank, stock low side, roto fab intake, and stock upper pulley (15% lower pulley). My next mod is the weaponx trunk tank and maybe the new roto fab 5” intake. __________________ Procharged 2018 ZL1 A10 2018 2500HD Duramax Last edited by TripleBlkZL1; 12-13-2018 at 04:43 PM.

08-22-2018, 10:42 PM	#22
20181le Drives: 2019 ZL1 1LE Coming Soon! Join Date: Jun 2018 Location: Wrenching on car! Posts: 49	Andrew does amazing work!

08-23-2018, 12:38 AM	#23
Chris Edwards Drives: 2017 ZL1 Join Date: Jan 2018 Location: California Posts: 165	How does it put the power down with stock tires?

User Name		Remember Me?
Password