Trufiber carbon parts coming soon! - Page 8

EDFHOBBIES · 09-18-2019, 08:44 PM

Oh almost forgot brake reservoir cover and windshield fluid reservoir cover are being made to

orange devil · 09-18-2019, 09:06 PM

Quote:

Originally Posted by EDFHOBBIES

Oh almost forgot brake reservoir cover and windshield fluid reservoir cover are being made to

Nice 👍

EDFHOBBIES · 09-19-2019, 08:59 AM

Carbon coil covers.. test fit today since a tropical depression is over us and got off early..

G2K · 09-19-2019, 11:21 AM

where can we see the pricing ?

EDFHOBBIES · 09-19-2019, 11:50 AM

After its listed so far all I see are the zl1 1le parts in CF

IneedAZ · 09-20-2019, 06:53 AM

Wish they would hurry up with the engine dress up stuff. Our car show weather is starting up.

Smokin19 · 09-30-2019, 12:00 PM

Getting more interest in what Truefiber is coming out with. Fired off an e-mail to them and they said, stayed tuned in Oct.

Now being retired, gives me too much time to think about " what if's" but, here goes.
Could they make a carbon fiber cover that goes over the SC lid, with only the contours, over stk. bolts, with 6 longer S/S bolts to replace stock? They already have the coil covers that sit over the exhaust, so why not the s/c cover? Or will heat effect the CF? I think it would send the engine, right of the park.

When can I order?

EDFHOBBIES · 09-30-2019, 01:40 PM

I would need a lid to give them for the mould. The carbon would hold the heat they worry about the clear coat.. I haven't seen any problems on coil cover so it may be ok.. is probably use as a show piece that you place on and off at a show..

I was really wanting the NX hood in carbon though when I had a stock blower.

Check out the new knee and door pads..

Smokin19 · 10-05-2019, 05:36 AM

Why can't they release what they have now? Car season up here in the north is just about over and I might be going with other vendors. They have made the wait too long.

krw1103 · 10-05-2019, 10:44 AM

Any possibility of getting carbon rear spoiler supports made in a taller height for the OEM spoiler on ZL1?

Smokin19 · 10-10-2019, 05:38 AM

Been over 10 months since your first post on these products and still nothing. What about the coil covers? Why do you have all these parts but, no else can get any?

EDFHOBBIES · 10-10-2019, 09:59 AM

I've stated numerous times that once the R&D is done (making new moulds) they will start production of parts from the completed moulds.

FoundNemo · 10-13-2019, 06:23 AM

I appreciate them taking the time to do all this. One thing I am wondering is will they offer these in a matte finish for the CF? I am not a glossy CF fan due to reflections/etc in the interior but if they did stuff in Matte (ala Carbon Cartel for the Mustangs), I would certainly be into a LOT of it.

s13remi · 10-14-2019, 07:29 AM

another thought..... I know GM makes a carbon dash pad already, but I think trufiber should make one as well so that all the carbon in the cars interior matches..

09-18-2019, 08:44 PM	#99
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Oh almost forgot brake reservoir cover and windshield fluid reservoir cover are being made to __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

09-19-2019, 08:59 AM	#101
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	Carbon coil covers.. test fit today since a tropical depression is over us and got off early.. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

09-19-2019, 11:21 AM	#102
G2K @Blackmamba_1LE Drives: 2017 1LE Join Date: Jun 2017 Location: South Florida Posts: 740	where can we see the pricing ? __________________ OG: Pray Perf FBO ET:11.5 @119 THEN:LT4 SC, E85 + Meth :10.6 @135 NOW: H/C Whipple 416ci

09-19-2019, 11:50 AM	#103
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	After its listed so far all I see are the zl1 1le parts in CF __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

09-20-2019, 06:53 AM	#104
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	Wish they would hurry up with the engine dress up stuff. Our car show weather is starting up. __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

09-30-2019, 12:00 PM	#105
Smokin19 Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014 Location: S.W. ohio Posts: 1,551	Getting more interest in what Truefiber is coming out with. Fired off an e-mail to them and they said, stayed tuned in Oct. Now being retired, gives me too much time to think about " what if's" but, here goes. Could they make a carbon fiber cover that goes over the SC lid, with only the contours, over stk. bolts, with 6 longer S/S bolts to replace stock? They already have the coil covers that sit over the exhaust, so why not the s/c cover? Or will heat effect the CF? I think it would send the engine, right of the park. When can I order? __________________ BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.

09-30-2019, 01:40 PM	#106
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	I would need a lid to give them for the mould. The carbon would hold the heat they worry about the clear coat.. I haven't seen any problems on coil cover so it may be ok.. is probably use as a show piece that you place on and off at a show.. I was really wanting the NX hood in carbon though when I had a stock blower. Check out the new knee and door pads.. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

10-05-2019, 05:36 AM	#107
Smokin19 Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014 Location: S.W. ohio Posts: 1,551	Why can't they release what they have now? Car season up here in the north is just about over and I might be going with other vendors. They have made the wait too long. __________________ BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.

10-05-2019, 10:44 AM	#108
krw1103 Drives: 2019 ZL1 Join Date: Jun 2019 Location: South Mississippi Posts: 82	Any possibility of getting carbon rear spoiler supports made in a taller height for the OEM spoiler on ZL1? __________________ 2019 ZL1 Satin Steel Gray Metallic 2018 Yukon XL Denali Satin Steel 2017 Sierra SLT Z71 Artic White Tricoat

10-10-2019, 05:38 AM	#109
Smokin19 Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014 Location: S.W. ohio Posts: 1,551	Been over 10 months since your first post on these products and still nothing. What about the coil covers? Why do you have all these parts but, no else can get any? __________________ BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.

10-10-2019, 09:59 AM	#110
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,345 View My Garage	I've stated numerous times that once the R&D is done (making new moulds) they will start production of parts from the completed moulds. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

10-13-2019, 06:23 AM	#111
FoundNemo Drives: 2019 ZL1 Join Date: Oct 2019 Location: GA Posts: 573	I appreciate them taking the time to do all this. One thing I am wondering is will they offer these in a matte finish for the CF? I am not a glossy CF fan due to reflections/etc in the interior but if they did stuff in Matte (ala Carbon Cartel for the Mustangs), I would certainly be into a LOT of it.

10-14-2019, 07:29 AM	#112
s13remi Drives: 2018 Camaro SS Join Date: Feb 2016 Location: Wilmington NC Posts: 32	another thought..... I know GM makes a carbon dash pad already, but I think trufiber should make one as well so that all the carbon in the cars interior matches..

User Name		Remember Me?
Password