02-19-2022, 03:05 AM | #1 |
Drives: 2018 ZL1 1LE and 1991 Z28 Join Date: Jan 2009
Location: SF Bay but from the 808
Posts: 1,078
|
BC Forged 2-piece HSC21 Wheels
Will fit 5th and 6th gen Camaros. Located in South San Francisco, CA
-Pics of how they look on my 6th gen ZL1 1LE in post #2 -BC Forge 2 piece forged wheels: HCS21 -Brushed double dark tint face gloss black barrels titanium hardware -20x10 custom offset fronts with 285/35/20 Michelin MP4S tires -20x11.5 custom offset rears with 315/35/20 Michelin MP4S tires. (Less than 4000 miles on these wheels and tires. Paid $4500 for the wheels and $1400 for tires mounted with new tpms. Also had wheels ceramic coated for $300 before tires mounted). Paid total of $6200 for these wheels. Local pick up preferred. If you want it shipped buyer pays for and arranges for shipping. I will just drop them off. If buyer were to ship then these should be shipped via freight on a pallet. There's no way I'll be able to find a box that big and to hold its weight. Sold my 5th gen ZL1 and don't want to run 20" wheels on my ZL1 1LE. Don't bother negotiating. Just the wheels brand new now goes for $4800 from PK (See last pic). With tires, tpms, and if you ceramic coat you're looking at $6900. I'm priced more than fair asking $3900 firm for wheels and tires. Thanks for looking.
__________________
In the garage: 2018 HBM ZL1 1LE // 2013 ZL1 (sold) // 1991 Camaro Z28 5.7L // 2016 Audi A6 Prestige Supercharged 3.0 V6 // 2002 Camaro SS (sold)
Last edited by sspddmn; 02-19-2022 at 03:28 AM. |
02-19-2022, 03:08 AM | #2 |
Drives: 2018 ZL1 1LE and 1991 Z28 Join Date: Jan 2009
Location: SF Bay but from the 808
Posts: 1,078
|
More photos...
__________________
In the garage: 2018 HBM ZL1 1LE // 2013 ZL1 (sold) // 1991 Camaro Z28 5.7L // 2016 Audi A6 Prestige Supercharged 3.0 V6 // 2002 Camaro SS (sold)
Last edited by sspddmn; 02-19-2022 at 03:27 AM. |
02-19-2022, 09:37 AM | #3 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Can the bolt be changed out to another color?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
02-19-2022, 02:24 PM | #4 |
Drives: 2018 ZL1 1LE and 1991 Z28 Join Date: Jan 2009
Location: SF Bay but from the 808
Posts: 1,078
|
To my understanding they can. You would have to contact BC Forged directly to get them and to get instructions on how to do it. i dont believe its as simple as unbolting them and bolting new ones in.
__________________
In the garage: 2018 HBM ZL1 1LE // 2013 ZL1 (sold) // 1991 Camaro Z28 5.7L // 2016 Audi A6 Prestige Supercharged 3.0 V6 // 2002 Camaro SS (sold)
|
02-19-2022, 08:04 PM | #5 |
IG @arod221_L5P
Drives: 2024 GMC 2500HD AT4 Join Date: Aug 2012
Location: Dripping Springs, TX
Posts: 376
|
those bolts hold the 3pcs together...yes they can be changed but it would take some effort and money for sure....tires would have to come off, then they would have to be unbolted, change bolts and then reseal the rims, then put tires back on. I think most wheel companies charge about $150 per wheel to do it right.
__________________
My Build Threads
2013 AGM 2SS/RS ***SOLD*** http://www.camaro5.com/forums/showthread.php?t=374535 2017 NGM ZL1 ***SOLD*** https://www.camaro6.com/forums/showthread.php?t=548637 ***SEARCHING FOR*** 19-24 RBM ZL1 M6 W/ VISIBLE CARBON HOOD |
02-20-2022, 03:35 AM | #6 | |
Drives: 2018 ZL1 1LE and 1991 Z28 Join Date: Jan 2009
Location: SF Bay but from the 808
Posts: 1,078
|
Quote:
If one had the patience, you could just mask everything up but the hardware and get them powder coated or painted
__________________
In the garage: 2018 HBM ZL1 1LE // 2013 ZL1 (sold) // 1991 Camaro Z28 5.7L // 2016 Audi A6 Prestige Supercharged 3.0 V6 // 2002 Camaro SS (sold)
|
|
02-20-2022, 08:11 AM | #7 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
What if you did one bolt at a time not saying completely disassemble the wheel.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
02-20-2022, 11:20 PM | #8 |
Drives: 2018 ZL1 1LE and 1991 Z28 Join Date: Jan 2009
Location: SF Bay but from the 808
Posts: 1,078
|
I wish I knew but you would be risking it on an expensive set of wheels.
__________________
In the garage: 2018 HBM ZL1 1LE // 2013 ZL1 (sold) // 1991 Camaro Z28 5.7L // 2016 Audi A6 Prestige Supercharged 3.0 V6 // 2002 Camaro SS (sold)
|
02-23-2022, 05:35 PM | #9 |
IG @arod221_L5P
Drives: 2024 GMC 2500HD AT4 Join Date: Aug 2012
Location: Dripping Springs, TX
Posts: 376
|
it can be done, but just as OP stated (and BC Forged themselves) if the shop you take them to doesn't know what they're doing they could ruin the wheels...painting them one at a time could be done...but I would suggest painting them on the wheel so you don't break the seal. this could end up looking pretty bad if you weren't very careful painting them though.
I would strongly recommend not removing one bolt at a time to paint them one at a time...when you bolt them back together you will chip the paint on the bolts anyways when putting them back on.
__________________
My Build Threads
2013 AGM 2SS/RS ***SOLD*** http://www.camaro5.com/forums/showthread.php?t=374535 2017 NGM ZL1 ***SOLD*** https://www.camaro6.com/forums/showthread.php?t=548637 ***SEARCHING FOR*** 19-24 RBM ZL1 M6 W/ VISIBLE CARBON HOOD |
02-24-2022, 07:41 AM | #10 |
Drives: 2016 Camaro 2SS Join Date: Feb 2020
Location: MN
Posts: 32
|
I have a 2016 SS. How can I determine if these will fit on an SS without interference? I am not sure if the wheel wells are the same between the SS and ZL1.
|
02-25-2022, 01:19 AM | #11 |
Drives: 2018 ZL1 1LE and 1991 Z28 Join Date: Jan 2009
Location: SF Bay but from the 808
Posts: 1,078
|
I'm almost certain they will fit. A lot of people run zl1 wheels and 1le wheels on their SS. Only the zl1 1le wheels won't fit a SS without some poking out the front fenders.
__________________
In the garage: 2018 HBM ZL1 1LE // 2013 ZL1 (sold) // 1991 Camaro Z28 5.7L // 2016 Audi A6 Prestige Supercharged 3.0 V6 // 2002 Camaro SS (sold)
|
03-08-2022, 10:38 PM | #12 |
Drives: 2018 ZL1 1LE and 1991 Z28 Join Date: Jan 2009
Location: SF Bay but from the 808
Posts: 1,078
|
Bump
__________________
In the garage: 2018 HBM ZL1 1LE // 2013 ZL1 (sold) // 1991 Camaro Z28 5.7L // 2016 Audi A6 Prestige Supercharged 3.0 V6 // 2002 Camaro SS (sold)
|
03-18-2022, 10:41 PM | #13 |
Drives: 2018 ZL1 1LE and 1991 Z28 Join Date: Jan 2009
Location: SF Bay but from the 808
Posts: 1,078
|
Tax return bump! Happy Friday everyone!
__________________
In the garage: 2018 HBM ZL1 1LE // 2013 ZL1 (sold) // 1991 Camaro Z28 5.7L // 2016 Audi A6 Prestige Supercharged 3.0 V6 // 2002 Camaro SS (sold)
|
|
|
Post Reply
|
|
|