SS1LE- 2nd Gen Side Rocker Moldings

cooldawg · 08-11-2022, 09:18 AM

Seems strange that the build tool doesn’t allow the side rockers. I know the Z trim has them…or maybe it’s a different part? Also noticed the factory rock guards
are very pricey. I believe both are added by the dealer.

I know I’ve seen SS1LEs with side ground effects…They look good and would benefit the paint for sure. Hard to see a down side other than price. Are the side moldings the same parts they use on ZL1? They would need to match the front splitter, I would think.

Ordering a car is exciting, but it’s tough making all these decisions… Color is tough as well with nothing on lots to look at. I like black but prefer yellow. Wait for CE that may never happen? The metallic grey looks like a nice compromise and wouldn’t show every tiny blemish in the clear like black.

Feel for the guys witnessing 23’s arrive despite waiting on their 22 sold orders. The crazy market and the way GM is handling that mess does make it easier to procrastinate.

ColeD · 08-11-2022, 09:41 AM

1LE cannot have side skirts from the factory for whatever reason. Must be aftermarket. I believe ZL1 molding is different, skirts not interchangeable. Several aftermarket options for rock guards. PPF is a good way to go

Try searching any questions in Google and adding camaro6 at the end, the forum search is terrible

VINCETHEGIANT · 08-11-2022, 08:28 PM

it just wont let you do it online. your dealer will be more than happy to put them on your new car.

2SS LT1 · 08-11-2022, 08:57 PM

The ZL1 side skirts are actually rocker panels molded that way.
The 2nd Gen Ground Effects package is a front splitter, side skirts, and rear diffuser that is dealer installed. I ordered it on my 2022 2SS.

cooldawg · 08-11-2022, 09:17 PM

Thanks guys. The Z rockers look very good, so I’m not sure I’d want the factory SS side rockers unless they have a very similar look. The SS1LE trim does look good enough without them. I was definitely planning to do film on the high impact areas regardless. I know from test driving a Couple Z’s; those summer tires throw a ton of loose garbage even during a cold test drive.

I’ll do more film if I end up going with a black car.

arpad_m · 08-11-2022, 09:42 PM

If you decide to order and install ZL1 side rocker moldings, don't forget that the ZL1 has wider front fenders, so you'll need some adjustments. Gen5DIY sells a fender push-out kit, or alternatively you can trim the ZL1 rockers to fit.

I decided to go aftermarket for now and purchased ZL1 style side skirts from C7 Carbon, these look 100% the same as the ZL1 factory part, but are obviously not integrated with the rocker panels and have a hollow bottom instead to allow for robust installation.

ZPirate · 08-12-2022, 01:19 AM

I went aftermarket too wuith ACS ZL1 style side skirts on my 1LE. Those also are hollow on the bottom to allow for secure installation. I also have ACS rock guards. ACS also has both available in a finish to match the 1LEs satin black trim.

Name: 20220220_175804.jpg
Views: 1091
Size: 380.5 KB

Name: 20220220_175804.jpg
Views: 1091
Size: 380.5 KB

cooldawg · 08-12-2022, 08:50 AM

Quote:

Originally Posted by ZPirate

I went aftermarket too wuith ACS ZL1 style side skirts on my 1LE. Those also are hollow on the bottom to allow for secure installation. I also have ACS rock guards. ACS also has both available in a finish to match the 1LEs satin black trim.

Attachment 1105954

Looks very good! Did these parts require any drilling on metal?

ColeD · 08-12-2022, 10:23 AM

Quote:

Originally Posted by cooldawg

Looks very good! Did these parts require any drilling on metal?

I believe most aftermarket skirts are hollow to allow for rivets into the lower body of the rocker, so yes. I wanted to get some but ultimately decided unless I were to get a taller spoiler to go with skirts I like the look of rock guards and 1le spoiler without skirts

NjaTrtl · 08-12-2022, 01:33 PM

Quote:

Originally Posted by ZPirate

I went aftermarket too wuith ACS ZL1 style side skirts on my 1LE. Those also are hollow on the bottom to allow for secure installation. I also have ACS rock guards. ACS also has both available in a finish to match the 1LEs satin black trim.

Attachment 1105954

That really completes the whole look. I don't know why they offer them as whole stand alone ground effects package but didn't include them with the 1LE package.

ZPirate · 08-12-2022, 01:40 PM

Quote:

Originally Posted by cooldawg

Looks very good! Did these parts require any drilling on metal?

Thanks! No drilling into any metal parts is required to install the side skirts. It does however require drilling holes into the bottom and the sides of the rockers, which are not metal, in order to install the side skirts. Then rivets are used to hold the side skirts in place.

ZPirate · 08-12-2022, 01:41 PM

Quote:

Originally Posted by NjaTrtl

That really completes the whole look. I don't know why they offer them as whole stand alone ground effects package but didn't include them with the 1LE package.

I agree. And it would be nice if Chevrolet included side skirts as part of the 1LE package.

super_sxxy322 · 08-12-2022, 01:59 PM

As with arpad... I went w/ the C7carbon and Rokblokz. No modifying anything with install of either. Although I would recommend larger screws over the rivets provided. My husband used the rivets to make the holes but used more along the lines of license plate size screws to fasten the skirts to the rockers. Them rivets just seemed too flimsy and short for a strong hold.

2SS LT1 · 08-12-2022, 10:07 PM

See LethalGarage install of factory aero package
http://https://www.youtube.com/watch?v=waahi8vu_Cc&t=6s

08-11-2022, 09:18 AM	#1
cooldawg Drives: RAM Join Date: Aug 2019 Location: Angola Posts: 171	SS1LE- 2nd Gen Side Rocker Moldings Seems strange that the build tool doesn’t allow the side rockers. I know the Z trim has them…or maybe it’s a different part? Also noticed the factory rock guards are very pricey. I believe both are added by the dealer. I know I’ve seen SS1LEs with side ground effects…They look good and would benefit the paint for sure. Hard to see a down side other than price. Are the side moldings the same parts they use on ZL1? They would need to match the front splitter, I would think. Ordering a car is exciting, but it’s tough making all these decisions… Color is tough as well with nothing on lots to look at. I like black but prefer yellow. Wait for CE that may never happen? The metallic grey looks like a nice compromise and wouldn’t show every tiny blemish in the clear like black. Feel for the guys witnessing 23’s arrive despite waiting on their 22 sold orders. The crazy market and the way GM is handling that mess does make it easier to procrastinate.

08-11-2022, 09:41 AM	#2
ColeD Drives: Chevy Camaro Join Date: Jan 2022 Location: AL Posts: 88	1LE cannot have side skirts from the factory for whatever reason. Must be aftermarket. I believe ZL1 molding is different, skirts not interchangeable. Several aftermarket options for rock guards. PPF is a good way to go Try searching any questions in Google and adding camaro6 at the end, the forum search is terrible __________________ '22 2SS 1LE manual in Red Hot with Red seat belts, alloy pedals, PPF, catch can, and suede kneepads.

08-11-2022, 08:57 PM	#4
2SS LT1 Drives: 2022 2SS Join Date: Mar 2022 Location: Nashville, Tennessee Posts: 65	The ZL1 side skirts are actually rocker panels molded that way. The 2nd Gen Ground Effects package is a front splitter, side skirts, and rear diffuser that is dealer installed. I ordered it on my 2022 2SS. __________________ __________________ 2022 Camaro 2SS (6000 Vehicle Delivered to Customer 4/7/2022) Build Date 2/28/2022 GAZ Summit White B04 Black Metallic Rally Stripes IOT Navigation MX0 A10 Transmission CF5 Power Sunroof SLN Strut Tower Brace 56V 20" 5-spoke Carbon Flash Metallic Wheels NPP Dual-mode exhaust VTD 2nd Gen Ground Effects Carbon Flash Metallic 1996 Corvette LT4 Convertible Collectors Ed SOLD 2004 Corvette ZO6 LeMans Commemorative SOLD

08-11-2022, 09:42 PM	#6
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,601 View My Garage	If you decide to order and install ZL1 side rocker moldings, don't forget that the ZL1 has wider front fenders, so you'll need some adjustments. Gen5DIY sells a fender push-out kit, or alternatively you can trim the ZL1 rockers to fit. I decided to go aftermarket for now and purchased ZL1 style side skirts from C7 Carbon, these look 100% the same as the ZL1 factory part, but are obviously not integrated with the rocker panels and have a hollow bottom instead to allow for robust installation. __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

08-12-2022, 01:19 AM	#7
ZPirate Drives: 2023 Summit White Camaro ZL1 M6 Join Date: Dec 2021 Location: North Carolina Posts: 1,753	I went aftermarket too wuith ACS ZL1 style side skirts on my 1LE. Those also are hollow on the bottom to allow for secure installation. I also have ACS rock guards. ACS also has both available in a finish to match the 1LEs satin black trim. __________________ 2023 Summit White ZL1 M6 (delivered 10/15/23) 2019 Dodge Durango R/T (daily driver) 2003 Nissan 350Z (modified) 2022 Rapid Blue 1SS 1LE M6 (delivered 2/19/22) (Sold) 2009 BMW 135i (Sold) Last edited by ZPirate; 08-12-2022 at 06:04 AM.

08-11-2022, 08:28 PM	#3
VINCETHEGIANT Drives: '20 SS/1LE Join Date: Jul 2020 Location: Lafayette,Indiana Posts: 34	it just wont let you do it online. your dealer will be more than happy to put them on your new car.

08-11-2022, 09:17 PM	#5
cooldawg Drives: RAM Join Date: Aug 2019 Location: Angola Posts: 171	Thanks guys. The Z rockers look very good, so I’m not sure I’d want the factory SS side rockers unless they have a very similar look. The SS1LE trim does look good enough without them. I was definitely planning to do film on the high impact areas regardless. I know from test driving a Couple Z’s; those summer tires throw a ton of loose garbage even during a cold test drive. I’ll do more film if I end up going with a black car.

08-12-2022, 01:59 PM	#13
super_sxxy322 Drives: '22 Camaro 2SS/1LE Join Date: Nov 2021 Location: North Jersey Posts: 161	As with arpad... I went w/ the C7carbon and Rokblokz. No modifying anything with install of either. Although I would recommend larger screws over the rivets provided. My husband used the rivets to make the holes but used more along the lines of license plate size screws to fasten the skirts to the rockers. Them rivets just seemed too flimsy and short for a strong hold. Attached Images __________________ '22 2SS/1LE, M6, Wild Cherry Tintcoat, PDR, Sunroof 11/1 - order submitted to GM - 12/26 - order accepted by GM 1/7 - TPW 1/24 1/13 - TPW 1/31 2/9 - 3800 - BUILT! 3/2 - 4300 3/14 - 4B00 3/19 - per Chevy chat - finishing up final testing and approvals - dealership ETA 4/16/22 3/29 - 4200 - dealer ETA 4/23 4/5 - 5000 - but can't pick up for another week 4/16 - 6000 - Home Sweet Home Daily driver... '23 Mazda CX5/Premium Plus (dealer demo)

08-12-2022, 10:07 PM	#14
2SS LT1 Drives: 2022 2SS Join Date: Mar 2022 Location: Nashville, Tennessee Posts: 65	Skirt Install See LethalGarage install of factory aero package http://https://www.youtube.com/watch?v=waahi8vu_Cc&t=6s __________________ __________________ 2022 Camaro 2SS (6000 Vehicle Delivered to Customer 4/7/2022) Build Date 2/28/2022 GAZ Summit White B04 Black Metallic Rally Stripes IOT Navigation MX0 A10 Transmission CF5 Power Sunroof SLN Strut Tower Brace 56V 20" 5-spoke Carbon Flash Metallic Wheels NPP Dual-mode exhaust VTD 2nd Gen Ground Effects Carbon Flash Metallic 1996 Corvette LT4 Convertible Collectors Ed SOLD 2004 Corvette ZO6 LeMans Commemorative SOLD

User Name		Remember Me?
Password