08-08-2022, 11:40 AM | #1 |
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,047
|
COOLING CROSSOVER MOD ???
Hey Team, Just received my Synergy 2 Gallon fender tank, and was considering adding this Weapon X manifold adapter. I have never seen a car with these, or heard of then, so assuming they work, wanted to see who else has them, if anyone has measured improvements?
My only concern would be all the extra hosing / connectors... and if the stock pump could keep up... thoughts? Here is a link to the page. https://weaponxmotorsports.com/colle...=8763925725275 Here is what they say... These cooling manifold adapters allow you to remove the front coolant crossover tube so the intercooler bricks can receive flow independently and not have to share a coolant path which leads to starvation on the far side. These allow you to bolt on and go to braided lines with AN fittings as well.
__________________
2022 M6 ZLE: Katech CNC Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC Coated ARH + AWE Touring + Magnaflow Center X + E85 + MSD Coils + Banks iDash + JMS Booster + Synergy Fender Tank ALL the RED Rear End BMR Goodies + JRE Terminator Cam Package + Remote Tuning and Moral Support from TED @ JRE BMR Motor Mounts + DMS Front HX + FIC 30's + APEX SM.10's + 305/345 R888R's = 770rwhp 785rwtq @E50 13.5psi |
08-08-2022, 11:45 AM | #2 |
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,047
|
I just realized that Synergy has the same thing... Thoughts?
__________________
2022 M6 ZLE: Katech CNC Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC Coated ARH + AWE Touring + Magnaflow Center X + E85 + MSD Coils + Banks iDash + JMS Booster + Synergy Fender Tank ALL the RED Rear End BMR Goodies + JRE Terminator Cam Package + Remote Tuning and Moral Support from TED @ JRE BMR Motor Mounts + DMS Front HX + FIC 30's + APEX SM.10's + 305/345 R888R's = 770rwhp 785rwtq @E50 13.5psi |
08-09-2022, 01:01 PM | #3 |
Drives: 2022 ZL1 1LE Join Date: Jul 2022
Location: Vegas
Posts: 34
|
Looks interesting. At the very least, it should increase the capacity. Or, even open up the possibility of separate coolers for each side. Though, that could be a plumbing and mounting space nightmare.
|
07-13-2023, 12:49 PM | #4 |
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,047
|
Has no one on here tried this?
__________________
2022 M6 ZLE: Katech CNC Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC Coated ARH + AWE Touring + Magnaflow Center X + E85 + MSD Coils + Banks iDash + JMS Booster + Synergy Fender Tank ALL the RED Rear End BMR Goodies + JRE Terminator Cam Package + Remote Tuning and Moral Support from TED @ JRE BMR Motor Mounts + DMS Front HX + FIC 30's + APEX SM.10's + 305/345 R888R's = 770rwhp 785rwtq @E50 13.5psi |
07-13-2023, 10:46 PM | #5 |
Drives: Chevrolet Camaro ZL1 Join Date: May 2022
Location: Concordia
Posts: 437
|
I don't think all the added plumbing and crap that's needed is going to make a lot of people be interested and that's why I don't think anyone here has done it.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% Pulley, NGK HR7 Ruthenium spark plugs, Katech Oil Pump, LME tensioner, DOD delete, Cam, MPI lid, Soler ported 87mm (91mm effective) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, Borla X pipe, AFe NPP exhaust, Black Widow Angry Housewife/ Venom 250 mufflers, BMR engine mounts, Banks iDash, Lithium Battery, Course Motorsports phone mount, AEM X- Series, HP Tuners, JMS, E85, 13.6 psi
737 HP/ 779 TQ |
07-14-2023, 06:11 AM | #6 |
Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014
Location: S.W. ohio
Posts: 1,551
|
I went with the larger capacity triple WeaponX ht xchgs and called it a day. Been very satisfied even on the hottest days.
__________________
BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.
|
07-14-2023, 09:54 AM | #7 |
Drives: 2023 ZL1 M6 Join Date: Sep 2018
Location: Pace FL
Posts: 417
|
The extra hose will add some capacity, but it still kicks down at the blower brick. They look cool, but I don’t see it helping.
__________________
2024 Riverside Blue ZL1 M6
Magnuson 2650R, NW 103, Roto Fab Big Gulp, Jet Hot Coated ARH 2 inch LT's, Stainless Works NPP, Too High PSI Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, 295/30-315/30, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold |
|
|
Post Reply
|
|
|