06-16-2018, 08:25 AM | #15 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
I have seen the ECS do low 800's on Fifth Gens, so I would have never doubted the same/similar results on Gen6.
__________________
|
06-16-2018, 12:24 PM | #16 |
Drives: 2ss Join Date: Jan 2018
Location: OK
Posts: 148
|
Is this with stock pistons?
|
06-16-2018, 06:13 PM | #17 |
Drives: 2016 2SS Camaro Join Date: Sep 2016
Location: Cumming, GA
Posts: 541
|
Vengeance Racing forged Wiseco "drop in" pistons, but still stock rods. Pulleys are 32-tooth on jack shaft and 28-tooth on blower.
|
06-16-2018, 06:19 PM | #18 | |
Drives: 2016 2SS Camaro Join Date: Sep 2016
Location: Cumming, GA
Posts: 541
|
Quote:
Running off the shelf Moroso can with a -10an from each valve cover. I took the filter off the top and welded a -12an male fitting. I run a hose off the top of the can to underneath the car so there are less fumes in the engine bay. Was stinking inside the car at times. No more smells. I do run a pcv looped from the neck of the intake to the valley cover with a check valve. |
|
06-16-2018, 06:48 PM | #19 |
Drives: 2017 Camaro 1SS Join Date: Aug 2016
Location: NH
Posts: 1,692
|
|
06-16-2018, 07:26 PM | #20 |
Drives: 2016 Camaro SS Join Date: Jan 2017
Location: Lubbock tx
Posts: 3
|
Aka reckless who built your a8 for you sir what all did they do to it
|
06-16-2018, 08:40 PM | #21 |
Drives: 2016 2SS Camaro Join Date: Sep 2016
Location: Cumming, GA
Posts: 541
|
|
06-18-2018, 09:15 AM | #22 |
Drives: very fast Join Date: Nov 2010
Location: New Jersey
Posts: 84
|
Nice job guys!!
|
06-20-2018, 11:09 AM | #23 |
Drives: 2016 2SS Join Date: Jul 2016
Location: Sanford NC
Posts: 2,766
|
Well look at you big pimpin. Hope I had a hand in that somehow. LOL. Great work man, congrats.
|
06-20-2018, 12:31 PM | #24 |
Drives: 2016 2SS Camaro Join Date: Sep 2016
Location: Cumming, GA
Posts: 541
|
|
|
|
Post Reply
|
|
|