02-09-2019, 11:34 PM | #1 |
Drives: 22 Convertible V8 LT1 Join Date: Feb 2019
Location: Jensen Beach, Florida
Posts: 219
|
Driver door damage
The wind caught the driver's side door and damaged the hinge and side panel. The door is now unable to be opened beyond a couple inches without hitting the side panel. GIECO has scheduled an inspection for early morning Monday.
See photos attached. The undamaged photo is of the passenger side. 2017 RS 1LT Convertible -WTD |
02-11-2019, 11:59 AM | #2 | |
Drives: Wild Cherry LT1 Join Date: Dec 2016
Location: Massachusetts
Posts: 1,924
|
Quote:
Replacing the hinge is pretty easy, the harness unplugs from the body of the car and the hinge(s) can be unbolted / door removed. |
|
03-10-2019, 01:34 PM | #3 |
Drives: 22 Convertible V8 LT1 Join Date: Feb 2019
Location: Jensen Beach, Florida
Posts: 219
|
Door check
I had the door and fender repaired. The door check used does not appear to be genuine and squeak while opening. Does anyone know how to replace it? Do I have to take the door panel off?
|
03-10-2019, 01:35 PM | #4 |
Drives: 22 Convertible V8 LT1 Join Date: Feb 2019
Location: Jensen Beach, Florida
Posts: 219
|
Here is a link to the genuine part. https://www.tascaparts.com/oem-parts...heck-84009025/
|
03-10-2019, 09:42 PM | #5 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,582
|
Quote:
Sorry about the bad news, but I guess you kind of expected that, didn't you.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
03-12-2019, 07:04 AM | #6 |
You sure you didn't hit something on the side and got that damage! I did experience heavy wind before but not to the point where the door hit the fender and caused all of this mess!
|
|
03-12-2019, 08:03 AM | #7 |
Drives: 22 Convertible V8 LT1 Join Date: Feb 2019
Location: Jensen Beach, Florida
Posts: 219
|
Oh yeah I was there. It was some intense wind
|
03-12-2019, 09:53 AM | #8 |
if you want my advice touch up the door and buy a new fender and have a body shop paint it or since I don't really see any paint damage on the fender it is possible to use a hammer and bring it back together but you need a really good body shop to do that and the guy needs to know how to adjust the fender back to its original position since the damage is at a body line it is more difficult to do than a minor bend.
|
|
|
|
Post Reply
|
Tags |
damage, door |
|
|