08-21-2019, 07:29 AM | #1 |
Drives: 2017 SS Join Date: Sep 2011
Location: Oklahoma
Posts: 417
|
Wheel question
I am looking at a wheel I love but the offset is not ideal. The fronts are 20x9 +32, I plan on adding a 5mm spacer. The rear offsets are fine so I’m not concerned about that. The supplier guarantees it fits my ‘17 SS but what do you guys think?
Btw trying to get a flush or just slightly inside the fender look. Sent from my iPhone using Tapatalk
__________________
2017 SW SS
|
08-21-2019, 11:00 AM | #2 |
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
well.... off set is just one factor, Even if a wheel is a 20x8.5 25 off set it wont mean it fits over the calipers. design will also play a factor.
but yes a 5mm spacer should get the wheel sitting close enough where is not to tucked in, just test fit for caliper clearance. |
08-21-2019, 11:43 AM | #3 | |
Drives: 2017 SS Join Date: Sep 2011
Location: Oklahoma
Posts: 417
|
Wheel question
Quote:
Thank you for your help. The wheel is the Velgen Classic5 and it has been used on 5th gens successfuly so the design should work. 5 spoke design wheels are hard to find for these cars. Sent from my iPhone using Tapatalk
__________________
2017 SW SS
|
|
09-06-2019, 04:38 PM | #4 |
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
I understand but I got plenty of 5 spoke lol, joke, talk to velgen nothing a small spacer wont fix
|
|
|
Post Reply
|
Thread Tools | |
|
|