07-31-2019, 03:49 PM | #15 | |
|
Quote:
If you want to prep the coating for using a topper on it, wash it with Carpro Reset, this shampoo will remove any oils on top of the coating, allowing whatever SIO2 sealant you're using as a topper to bond correctly. Many times when using this soap, thinking my "topper" was gone, it became refreshed after washing, and no re-application of a topper was needed. Oils from the road, which get on your paint when driving in the rain, had simply got on top of my "topper", and masked the beading and sheeting effect. PH balanced soaps are not strong enough to remove this. Reset is @ a PH of 10 undiluted, and won't strip SIO2 coatings or sealants, but will refresh them by removing oils that are on top of them. If your using 90% IPA diluted to 70/30 with distilled water, your solution is 63%. This is more than strong enough to remove any carnauba waxes, and polymer sealants. You really don't need this strong of a solution though, instead mix a full bottle of 90% IPA with a full bottle of distilled water, equal amounts of each, for a 45% solution for stripping waxes/sealants. A more simple way to strip wax/sealant is to mix 4-5 ounces of APC (all purpose cleaner) to your wash bucket, and just wash the car as normal, eliminating the extra step with IPA. Use IPA as a prep before applying base protection, add 3 bottles of distilled water to the one bottle of 90% IPA for a 22% solution. This will remove any polishing oils, clay lube residue, or oils from your hands, to prep the paint properly for adding your base layer of protection. To make it really simple, if you have a 16oz spray bottle, add 4 oz. of 90% IPA, and 12 of distilled water, for a 32 oz. just double it, 8 oz. 90% IPA, 24 oz. distilled water.
__________________
Roto-Fab intake, SW 1 7/8" LT w/hi flow cats, Flowmaster outlaw exhaust, UDP, 160* stat, Circle D 3200, Moroso catch can, TCI line lock, Zex Nitrous 125 shot, 3.91 gear, Eaton True-trac, DSS 1000hp axles. |
|
08-01-2019, 02:15 AM | #16 |
Drives: 2019 Camaro 2SS A10 Join Date: Feb 2019
Location: San Diego
Posts: 207
|
Good info Joe and Glen, thanks for the reply!
__________________
2019 2SS: A10, Satin Steel Gray Metallic, MRC, Nav.
|
|
|
Post Reply
|
|
|