19x 10.5 Square setup

BanOne · 06-25-2020, 05:32 AM

Guys I have been considering several different setups for track rims, latest option is a 19 x 10.5 with 305 all around. This is one of the recommended setups for track on Apex's websight. Is there anyone else running this, I like it because it I could rotate the tires and still keep stock studs. Any one else have any insight on this setup.

Thanks in advance

Doug

crab · 06-25-2020, 07:42 AM

Check Glamcem's posts

foshjowler · 06-25-2020, 08:31 AM

It fits, you may have to do some finagling with offset/spacers depending on what suspension you have. I use it for autox and am very happy with it. Though some of the SS/ZL1 guys prefer a little more tire in the back

carguy55 · 06-29-2020, 07:12 AM

Lot's of us running it and a bunch of posts about how to do it. You can't keep stock studs on the front.

https://www.camaro6.com/forums/showthread.php?t=529442

GTASS1LE · 07-01-2020, 12:57 PM

Check out Superspeed RF05RR’s as a significantly less expensive option. About to mount them on my car wrapped in Cup2s.

BanOne · 07-02-2020, 11:16 PM

Quote:

Originally Posted by GTASS1LE

Check out Superspeed RF05RR’s as a significantly less expensive option. About to mount them on my car wrapped in Cup2s.

You went with the 19x10.5 et35? What do you have to do to make them fit in front?

GTASS1LE · 07-03-2020, 06:08 AM

Quote:

Originally Posted by BanOne

You went with the 19x10.5 et35? What do you have to do to make them fit in front?

I ordered custom 20mm spacers from Novustech, ARP extended studs and Katech titanium lug nuts. They will poke slightly but the corner of the Cup2s are more rounded as compared to SC3 so should look fine.

I’ll measure the exact clearance to the strut once everything comes in and is mounted.

06-25-2020, 05:32 AM	#1
BanOne Drives: 1977 Pontiac Trans Am Join Date: Oct 2019 Location: Florida Posts: 210	19x 10.5 Square setup Guys I have been considering several different setups for track rims, latest option is a 19 x 10.5 with 305 all around. This is one of the recommended setups for track on Apex's websight. Is there anyone else running this, I like it because it I could rotate the tires and still keep stock studs. Any one else have any insight on this setup. Thanks in advance Doug

06-25-2020, 07:42 AM	#2
crab Drives: 2019 1LE Join Date: Nov 2019 Location: NW Posts: 137	Check Glamcem's posts __________________ "That my friend.. is the sweet succulent sound of the car preparing to ignite the wonderfully tasty nectar your V8 needs to send the screaming bald eagles furiously from the 4 pipes out of the rear of your vehicle"

06-25-2020, 08:31 AM	#3
foshjowler Drives: 2017 Camaro 2.0T, 91 Miata Join Date: Jan 2020 Location: Raleigh, North Carolina Posts: 505 View My Garage	It fits, you may have to do some finagling with offset/spacers depending on what suspension you have. I use it for autox and am very happy with it. Though some of the SS/ZL1 guys prefer a little more tire in the back __________________ 305 BFG Rivals FTW Youtube Channel

06-29-2020, 07:12 AM	#4
carguy55 Drives: 2018 1SS 1LE Join Date: Feb 2017 Location: Austin, Texas Posts: 1,486 View My Garage	Lot's of us running it and a bunch of posts about how to do it. You can't keep stock studs on the front. https://www.camaro6.com/forums/showthread.php?t=529442

07-01-2020, 12:57 PM	#5
GTASS1LE Drives: Chevrolet Camaro SS Join Date: Apr 2019 Location: King City Posts: 40	Check out Superspeed RF05RR’s as a significantly less expensive option. About to mount them on my car wrapped in Cup2s.

User Name		Remember Me?
Password