11-15-2020, 05:35 PM | #1 |
Drives: Red Camaro Join Date: Dec 2017
Location: Los Angeles
Posts: 317
|
Whipple connector instruction help
Hey so i need helo understanding how to reuse stock fittings to go on brand new hoses that whipple provides. I dont understans how thats possible if the fittings are super glues or something to the orignial hose. Also anyone have pics of every single hose routed from the whipple kit. Thanks.
Sent from my SM-N975U using Tapatalk |
11-16-2020, 12:35 PM | #2 |
Drives: 2020 Camaro SS Join Date: Nov 2020
Location: Elma, NY
Posts: 6
|
Picture of what you are talking about??
|
11-16-2020, 01:46 PM | #3 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
If you are referring to the vacuum hoses, Whipple basically supplied extension hoses and we cut the stock ones in half where needed and used the whipple hoses the make them longer. This part was kind of unclear in the directions. maybe some of these pics will help you out.
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
11-21-2020, 12:29 AM | #4 |
Drives: Red Camaro Join Date: Dec 2017
Location: Los Angeles
Posts: 317
|
Yes the pictures helped a lot. But yea the instructions are kinda weird a little. It says to reuse old hose fittings and use it with new hoses. But there aren’t any instructions on how to mate the fittings to the hose.
Sent from my iPhone using Tapatalk |
11-21-2020, 12:53 AM | #5 |
Drives: 2018 Camaro SS Join Date: Aug 2020
Location: MD
Posts: 295
|
gonna steal the topic for a sec. with the whipple, can you still use the strut tower bar from GM? im thinking no due to possible clearance issues.
__________________
2018 Camaro SS - Hyper Metallic Blue |
12-09-2020, 11:48 AM | #6 |
Drives: Camaro Join Date: Mar 2016
Location: Michigan
Posts: 107
|
You need to slice the old hose and the fitting comes right out. Be careful though because the fittings have an o-ring on them that you can slice too.
|
|
|
Post Reply
|
Thread Tools | |
|
|