My small build thread.....w/2650 and now TURBO!!! - Page 3

Markoz28 · 07-13-2018, 07:47 PM

Excited to see the results.

Mcmillion · 07-14-2018, 09:25 AM

Quote:

Originally Posted by RabbitZL1

small update.... i installed a 9.55 lower last week and attemped to try some ethanol. I know its been said that the fuel system cant handle any but i had to see it for my self what exactly runs out. Its a combination of pump and injector. I'll be installing the DSX aux fuel system in a few days and we will see what happens.

Ive heard the stock fuel system is only good to about 650 at the tire with an e85 blend. Would you agree with this from your testing? You are probably right there with the pulley.

RabbitZL1 · 07-15-2018, 09:34 PM

Quote:

Originally Posted by Mcmillion

Ive heard the stock fuel system is only good to about 650 at the tire with an e85 blend. Would you agree with this from your testing? You are probably right there with the pulley.

Im way past 650. It made 636 with no pulleys. Tried e50 then down to 39 percent and still no good. Back on 93 and this thing is flying! I wouldnt be surprised if it made 700.

RabbitZL1 · 09-27-2018, 10:12 PM

Im BACK! I know some people were thinking I was gonna disappear Lol.....As some of you know, summer in NY was the shittiest its been in a loong time (heat/humidity) so I havent messed with the car much. Now that its cooler I decided to put the car on the dyno. Since my last big update (9.55 lower) I've added a 2.31 upper, more meth, e85 (60%) and an ice tank. Here are the results:

Im pretty sure this is the highest hp stock blower/stock long block. First pull was actually the very first pull and I was so happy I didnt want to touch the tune. Since I always street tune cars before the dyno very rarely do I have to make any changes. Manifold temps started at 107 and got to 138 by end of the pull. Second pull was a 10 minute cool down with ice packed in the tank. Very happy with the results. Looking to go to a track rental next Thursday. I also tried to spray it on the next pull but low side pressure dropped too much so I let off. Only sprayed it between 4000 and 5000 rpm.

Will be adding a standalone fuel cell I have from a previous build. Next post will be track results

Markoz28 · 09-28-2018, 01:56 PM

Wow those are crazy numbers!

Keep it up

Fraxum · 09-28-2018, 02:32 PM

atco is open tonite! Going.

laynlo15 · 09-28-2018, 03:34 PM

My Camaro went 10.03@138 on similar power, your car is heavier so its possible if you can go in the 1.40's on 60 ft you could run that fast on your next outing.

laynlo15 · 09-28-2018, 03:49 PM

For some reason I can't get my picture post but just wanted to help and give my increments for you to get somewhat closer to your goal. I ran in about 70 degree temps. Just comparing your pass at your lower hp/tq.
60 ft 1.471
330 ft 4.22
1/8 6.468
mph 110.38
1000 ft 8.39
1/4 10.03
mph 138.05

1.67
4.63
7.003
106.02
9.037
10.754
133.45

RabbitZL1 · 09-28-2018, 04:05 PM

Quote:

Originally Posted by Fraxum

atco is open tonite! Going.

Stuck at work smh

Quote:

Originally Posted by laynlo15

For some reason I can't get my picture to print but just wanted to help as give my increments for you to get somewhat closer to your goal. I ran in about 70 degree temps
60 ft 1.471
330 ft 4.226
1/8 6.468
mph 110.37
1000 ft 8.39
1/4 10.035
mph 138.05

Im hoping for a 9.xx but i'll accept a 10.0 lol. Great time! So close to that 9!!

djfury05 · 09-28-2018, 04:30 PM

So what is the complete mod list now?

RabbitZL1 · 09-28-2018, 04:37 PM

Quote:

Originally Posted by djfury05

So what is the complete mod list now?

Kong performance ported blower and snout
Katech 103mm TB
Homemade 5" intake
Lingenfelter 9.55 Lower
Kong Performance 2.31 Upper
Stainless Works 2" headers
AEM/Devils own meth kit
DSX Flex sensor Currently on 60% ethanol
Chiseled performance Ice Tank
Nitrous outlet spray bar system (haven't successfully used it yet)

777Jackpot777 · 09-30-2018, 02:19 PM

Awesome build man congrats I’m sub’d! Thanks for all the knowledge.

RabbitZL1 · 09-30-2018, 08:40 PM

Quote:

Originally Posted by 777Jackpot777

Awesome build man congrats I’m sub’d! Thanks for all the knowledge.

No problem. Always willing to help.....

XXX ZL1 · 09-30-2018, 10:18 PM

Quote:

Originally Posted by RabbitZL1

Kong performance ported blower and snout
Katech 103mm TB
Homemade 5" intake
Lingenfelter 9.55 Lower
Kong Performance 2.31 Upper
Stainless Works 2" headers
AEM/Devils own meth kit
DSX Flex sensor Currently on 60% ethanol
Chiseled performance Ice Tank
Nitrous outlet spray bar system (haven't successfully used it yet)

Still stock fuel system and just pouring the meth to it? Car is making power for sure. Your car must be the one posted on Kongs FB. Lol

09-27-2018, 10:12 PM	#32
RabbitZL1 Drives: 2018 Camaro ZL1 Join Date: Dec 2017 Location: Queens, NY Posts: 223	Im BACK! I know some people were thinking I was gonna disappear Lol.....As some of you know, summer in NY was the shittiest its been in a loong time (heat/humidity) so I havent messed with the car much. Now that its cooler I decided to put the car on the dyno. Since my last big update (9.55 lower) I've added a 2.31 upper, more meth, e85 (60%) and an ice tank. Here are the results: Im pretty sure this is the highest hp stock blower/stock long block. First pull was actually the very first pull and I was so happy I didnt want to touch the tune. Since I always street tune cars before the dyno very rarely do I have to make any changes. Manifold temps started at 107 and got to 138 by end of the pull. Second pull was a 10 minute cool down with ice packed in the tank. Very happy with the results. Looking to go to a track rental next Thursday. I also tried to spray it on the next pull but low side pressure dropped too much so I let off. Only sprayed it between 4000 and 5000 rpm. Will be adding a standalone fuel cell I have from a previous build. Next post will be track results Last edited by RabbitZL1; 09-27-2018 at 10:25 PM.

09-28-2018, 02:32 PM	#34
Fraxum Drives: a M6 LT1 ordered From Becky!!! Join Date: Jan 2010 Location: NJ Posts: 7,520	atco is open tonite! Going. __________________ "Democracy Dies in Darkness" My LT1 Keeper ..... ..... My Car Blog CarPlayList, a free App to build USB and Android Music drives.

09-28-2018, 03:34 PM	#35
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	My Camaro went 10.03@138 on similar power, your car is heavier so its possible if you can go in the 1.40's on 60 ft you could run that fast on your next outing. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

09-28-2018, 03:49 PM	#36
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	For some reason I can't get my picture post but just wanted to help and give my increments for you to get somewhat closer to your goal. I ran in about 70 degree temps. Just comparing your pass at your lower hp/tq. 60 ft 1.471 330 ft 4.22 1/8 6.468 mph 110.38 1000 ft 8.39 1/4 10.03 mph 138.05 1.67 4.63 7.003 106.02 9.037 10.754 133.45 Last edited by laynlo15; 09-28-2018 at 04:17 PM.

09-30-2018, 02:19 PM	#40
777Jackpot777 Drives: 2018 ZL1, 2018 Tahoe RST Edition Join Date: Aug 2018 Location: Orlando FL Posts: 106	Awesome build man congrats I’m sub’d! Thanks for all the knowledge. __________________ 2018 Camaro ZL1 6MT and 2018 Tahoe RST Current Mods: ROTO FAB / MBRP Catback Coming Soon: 9.1 IW / TSP 2" Headers with Catless Connection Pipe / NGK Plugs / Possible Meth injection / HPTuners Tune

07-13-2018, 07:47 PM	#29
Markoz28 Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018 Location: RGV Texas Posts: 1,527	Excited to see the results.

09-28-2018, 01:56 PM	#33
Markoz28 Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018 Location: RGV Texas Posts: 1,527	Wow those are crazy numbers! Keep it up

09-28-2018, 04:30 PM	#38
djfury05 Drives: 2017 ZL1 A10 Join Date: Jul 2014 Location: Atlanta, GA Posts: 394	So what is the complete mod list now?

User Name		Remember Me?
Password