ZL11LE wheels on Z28 - does it work?

[2SSRS@Gen5diy]

Originally Posted by 47Ronin

Yes, please.
And thanks to all for the great infos.

So I have 5 pics for you, first 2 are the stock Z/28 rims and tires on the car in the rear only, next are the stock rear ZL1 1LE rims and tires, as you can see they fit and don't stick out much more, but they hit the plastic wheel well but only at the center part of the rim, but if you wanted to get an extra set of wheel wells and trim them you can run the rimes with out spacers, or run some 3-5 mm spacers and your good IMO.

Last pic is from the back end so you can see the 2 different tires and rims.

[47Ronin]

Thank you very much.

Which plastic do you mean they hit?

[47Ronin]

Do you have a photo where you can see the rear wheel together with the car from the side?

[2SSRS@Gen5diy]

Originally Posted by 47Ronin

Thank you very much.

Which plastic do you mean they hit?

When you take the rim off, and look at the trunk from where the rim was, you will see the plastic, it's your wheel well liner.

[2SSRS@Gen5diy]

Originally Posted by 47Ronin

Do you have a photo where you can see the rear wheel together with the car from the side?

Yes its the 3rd pic I posted.