You are browsing camaro6 
12-29-2017, 11:30 AM
|
#1 |
      
Drives: 2011 2SS/RS & 2017 1SS Join Date: Apr 2011
Location: Maryland
Posts: 1,960
|
SJM 6th Gen Line Lock Install
Steve from SJM Manufacturing (http://www.sjmmanufacturing.com) sent me over his newly developed Line Lock Kit for the 6th Gen Camaro. The quality is great as usual. (I've had his kit in my 5th gen for the past 6 years).
The install seems to be pretty straightforward so far. I have already installed the electronics in the interior of my car and ran the red wire to through an existing hole in the firewall to the engine bay. I then ran the wire under the black plastic to the passenger side where the solenoids will be. I finished installing the solenoids piece. It was a straight forward install. Make sure to get the fittings as tight as possible so there are no leaks. The reason I have always liked the SJM kit is there is a two stage process to make the line lock work. You have a Toggle switch to turn on the system and then you have a button to hold to actually engage the system. With this toggle switch, the system is not always ON, if you by accident press the button. Install Complete.... 
__________________
2011 Chevrolet Camaro 2SS/RS L99 (1 of 782)
10.78 @125mph ALL MOTOR SBE Built/Tuned by Me 2017 Chevrolet Camaro 1SS Auto 9.29 @144.57mph ALL MOTOR SBE #TEAMGPI Gwatney Performance Innovation Last edited by bhillakaiceberg; 12-31-2017 at 06:20 PM. |
|
|
|
12-29-2017, 12:17 PM
|
#2 |
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
awesome, it looks very clean, you know if this will work on a M6?
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
|
|
|
|
12-29-2017, 12:38 PM
|
#3 |
Drives: 2016 1SS 6speed Join Date: Mar 2016
Location: IL
Posts: 527
|
It will....
__________________
2016 1SS M6 P1SC Stg II 592rwhp/548rwtq (for now)
GForce Outlaw axles & driveshaft, TSP 2” LT’s, turndowns, RTS S71 drag pack with radials. |
|
|
|
|
12-29-2017, 12:42 PM
|
#4 | |
|
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
Quote:
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
|
|
|
|
|
12-29-2017, 01:13 PM
|
#5 |
|
Drives: 2011 2SS/RS & 2017 1SS Join Date: Apr 2011
Location: Maryland
Posts: 1,960
|
Yup...will work on Auto and Stick...
__________________
2011 Chevrolet Camaro 2SS/RS L99 (1 of 782)
10.78 @125mph ALL MOTOR SBE Built/Tuned by Me 2017 Chevrolet Camaro 1SS Auto 9.29 @144.57mph ALL MOTOR SBE #TEAMGPI Gwatney Performance Innovation |
|
|
|
|
12-29-2017, 01:35 PM
|
#6 |
  
Drives: 2016 2SS Join Date: Jul 2016
Location: Sanford NC
Posts: 2,766
|
Nice.
__________________
2016 2SS. H/C SBE 1.37 60ft, 6.36@109.49, 9.97@136+. Nuff Said.
|
|
|
|
|
12-31-2017, 06:21 PM
|
#7 |
|
Drives: 2011 2SS/RS & 2017 1SS Join Date: Apr 2011
Location: Maryland
Posts: 1,960
|
Finished the install. Great product and easy straightforward process. Works great!
__________________
2011 Chevrolet Camaro 2SS/RS L99 (1 of 782)
10.78 @125mph ALL MOTOR SBE Built/Tuned by Me 2017 Chevrolet Camaro 1SS Auto 9.29 @144.57mph ALL MOTOR SBE #TEAMGPI Gwatney Performance Innovation |
|
|
|
|
01-01-2018, 07:35 AM
|
#8 |
Drives: 2017 SS 1LE Mosiac Black Join Date: Nov 2016
Location: DFW, TX
Posts: 1,132
|
I didn't see any link on his site for 6 gen?
__________________
________________________________________________
Frankenstein Engineering Dynamics Stage 1 H/C/E85 536HP/488TQ |
|
|
|
|
01-01-2018, 09:14 AM
|
#9 |
    
|
Awesome, I need to talk to steve about getting mine installed. Been putting it off due to the holidays and money lol
__________________
2001 Camaro V6
2016 Camaro 2SS |
|
|
|
|
01-01-2018, 11:53 AM
|
#10 | |
 
Drives: 2016 2SS Join Date: Feb 2017
Location: DFW
Posts: 39
|
Quote:
On his FB page there is a list starting for those of us who want one
__________________
2016 2SS A8, Pray Performance tune, Flowmaster Axle back, e85, DR's on stock 20" wheels
60': 1.662 330': 4.779 660':7.330 660' MPH: 95.38 1/4 mile best ET 11.417 MPH 119 |
|
|
|
|
|
01-01-2018, 12:08 PM
|
#11 |
|
|
Do you have any more pictures by any chance? I'm going to talk to steve about getting mine. Not sure where I want to mount them at. I know emblempros makes console switchplate but I don't need 9 switches lol
__________________
2001 Camaro V6
2016 Camaro 2SS |
|
|
|
|
01-02-2018, 06:53 AM
|
#12 |
|
Drives: 2011 2SS/RS & 2017 1SS Join Date: Apr 2011
Location: Maryland
Posts: 1,960
|
Correct. Steve has not released to the public as of yet.
I do not have anymore pics. The switches and such can be mounted wherever you choose. Just run the wires like you would for any electrical hookup.
__________________
2011 Chevrolet Camaro 2SS/RS L99 (1 of 782)
10.78 @125mph ALL MOTOR SBE Built/Tuned by Me 2017 Chevrolet Camaro 1SS Auto 9.29 @144.57mph ALL MOTOR SBE #TEAMGPI Gwatney Performance Innovation |
|
|
|
|
01-02-2018, 08:29 AM
|
#13 | |
|
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
Quote:
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
|
|
|
|
|
03-10-2020, 09:22 PM
|
#14 |
|
Did your kit come with 6 wires? I have 6 wires coming from my button switch.. not sure where im putting them all as im tieing in to the 12v outlet in the car
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
