New bumper

[Pagliaro]

Omg I want this bumper with 6th gen style headlights
And 5th gen Zl1 cowl

[orange devil]

Originally Posted by Pagliaro

Omg I want this bumper with 6th gen style headlights
And 5th gen Zl1 cowl

You will love it !!

[Pagliaro]

Omg yes that with Gen5Diy fenders and I'll have the look I want

[Pagliaro]

Well this sucks being Canadian cant find a source for this bumper.

Also a little confused reading the thread about gap lines
Read it was made for 2010-2013 but feel like it has the lines of 2014/2015

I really want to bite on this but seems to be sold out

[cnrad]

Originally Posted by Pagliaro

Well this sucks being Canadian cant find a source for this bumper.

Also a little confused reading the thread about gap lines
Read it was made for 2010-2013 but feel like it has the lines of 2014/2015

I really want to bite on this but seems to be sold out

It was created on a 2010-13 model, but I guess they had a 2014-15 hood. So it will fit best with 10-13 headlights and a 14-15 hood, but if you go the 6th gen style headlight route, then you'll want to go with the 14-15 version, otherwise part of the light will be blocked. There will be a slight gap in the headlight area, but it's better than having part of the light blocked. It fits on any year 5th gen though.

[Pagliaro]

Originally Posted by cnrad

It was created on a 2010-13 model, but I guess they had a 2014-15 hood. So it will fit best with 10-13 headlights and a 14-15 hood, but if you go the 6th gen style headlight route, then you'll want to go with the 14-15 version, otherwise part of the light will be blocked. There will be a slight gap in the headlight area, but it's better than having part of the light blocked. It fits on any year 5th gen though.

Thanks definitely want the 6th gen route so looks like I'd be leaning towards the 2014-2015

[Mattchew]

I got the bumper all up and installed and the fog lights that were recommended are off a 2018 and has no install instructions which did you guys end up doing as it looks like it just wants me to tap them into something

[orange devil]

You're going to want to use your stock fog light harness or the 5genDIY.. if you just try to tap into your side markers the drls will start to flicker.

[Pagliaro]

So far I am sol, I might have a US address I could use but now all are sold out except the ones with headlights I do not want.

[orange devil]

Originally Posted by Pagliaro

So far I am sol, I might have a US address I could use but now all are sold out except the ones with headlights I do not want.

That new front end will look amazing with that color of your car!! You could always sell the lights and recover some if that $$

[Pagliaro]

Originally Posted by Elvis66

That new front end will look amazing with that color of your car!! You could always sell the lights and recover some if that $$

I know like I really want to jump on this.
Talking to my US address friend this week

Its a service us address for shipping. The only thing that worries me is I wont be there to inspect for damages I am hoping his services will be.

Trying to contact Ikon Motorsports directly too.

Then the rgv shelby headlight setup I want is also dependent on fitment of this. If I get it I want 2014 model.

Saw durabend bumper with similar look but I prefer ikon

[Pagliaro]

Ordered without headlights at the moment.

[mbesman]

Originally Posted by zwc0442

Got mine on today. Haven't decided yet which headlights to go with so have the 2010 headlights in it still. Hopefully can come across a 2014-15 hood sometime as well.

Just noticed in the pic it looks like the bumper color doesn't match along the good but it's reflection just at that odd angle making the bumper look darker.

Looking at the pictures of this bumper, it appears there is an opening in the fog light area. On your car there is a bluish bumper reinforcement that is seen. Is there supposed to be something in that area. I know the drl's go in there but they don't fill the space obviously. Does this space stay open or is there a light supposed to be there to fill in space?

[cnrad]

Originally Posted by mbesman

Looking at the pictures of this bumper, it appears there is an opening in the fog light area. On your car there is a bluish bumper reinforcement that is seen. Is there supposed to be something in that area. I know the drl's go in there but they don't fill the space obviously. Does this space stay open or is there a light supposed to be there to fill in space?

That's the windshield washer fluid reservoir. I don't think anything is meant to go in that area to hide it though. You could try painting it with black spray paint or plastidip to keep it from standing out.