02-10-2016, 08:13 PM | #1 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
JDP Motorsports - MSD Atomic AirForce Intake Manifold Dyno Testing
We installed the MSD Atomic AirForce manifold on our 2016 Camaro SS with no issue what so ever. Bolted up like the factory manifold. The only provision that the manifold doesn't have for the Camaro is a fuel line crossover clamp. Within a minute, we had a solution. Clamped to the existing bolt on the manifold. See below:
CHECK OUT THE RESULTS!! 20 RHWP and 20 RWTQ! It made more at multiple points through the curve. This mod is officially worth every penny. Nicely done, MSD! All the best, Jared Royce 801.545.4215 Last edited by JDP Sales; 02-16-2016 at 02:03 PM. |
02-10-2016, 08:18 PM | #2 |
Drives: 2016 Camaro SS - A8, MRC, NPP Join Date: Apr 2009
Location: DE
Posts: 549
|
You posted picture as a teaser and no dyno results?! Not fair!!!
__________________
Delivered: 2016 SS Nightfall Grey - 1SS, MRC, NPP, A8
Current Vehicle: 2001 C5 Corvette Previous Cars: 2009 C6 Z06 2008 C6 Z51 PKG |
02-10-2016, 08:54 PM | #3 |
Drives: braaaaap Join Date: Jan 2011
Location: Indiana
Posts: 38
|
|
02-10-2016, 09:08 PM | #4 |
Drives: 2016 Bright Yellow 2SS A8 Join Date: Jul 2014
Location: Rancho Cucamonga, California
Posts: 610
|
I hope MSD finally got it right this time. A few years back if I can remember they had one for the 5th gen LS3 and it was pretty disappointing as far as performance results.
http://www.camaro5.com/forums/showthread.php?t=383527 I believe they wound up pulling it from the market because they couldn't justify that it made any more power over the stock manifold. Good luck guys. If it gives you another 10-15 rwhp over stock, I'm not sure I'd pay 1000 bucks for that. If it's closer to the 50 that they advertise then maybe. |
02-10-2016, 10:48 PM | #5 |
Drives: 2016 camaro ss Join Date: Oct 2015
Location: spokane
Posts: 329
|
__________________
Summit white, 2SS, Ceramic white interior, 6 piston brakes, Black Bowties, 6 Speed,3.9 sec 0to60 NPP,MRC,NAV,RX Catch can
|
02-11-2016, 07:39 AM | #6 |
Drives: 2021 Corvette Z51 Join Date: Dec 2014
Location: Oak Point, TX
Posts: 151
|
Very anxious to see these results! In the C7 world it's fairly well accepted these aren't worth anything more than a port job on the OEM manifold, but every car, and setup, is different so it has me very curious what you'll find.
Are you testing with the stock TB or ported? |
02-11-2016, 07:56 AM | #7 | |||
Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,256
|
Quote:
Quote:
Quote:
Kind regards, Jordan Priestley 801-545-4215 |
|||
02-11-2016, 07:58 AM | #8 |
Drives: 2021 Corvette Z51 Join Date: Dec 2014
Location: Oak Point, TX
Posts: 151
|
I love your attention to detail while testing, it is definitely appreciated! Does VMax offer a ported intake manifold that you could test as well?
|
02-11-2016, 05:52 PM | #9 |
Lethal Camaro
Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013
Location: Temecula, CA
Posts: 3,855
|
So.. how about those numbers?
__________________
|
02-11-2016, 05:58 PM | #10 |
Drives: 2016 Bright Yellow 2SS A8 Join Date: Jul 2014
Location: Rancho Cucamonga, California
Posts: 610
|
|
02-11-2016, 06:54 PM | #11 |
Drives: 2016 Camaro SS Join Date: Jan 2016
Location: Mount Dora, FL
Posts: 779
|
I'm guessing this intake is a relative dud on a stock setup. If it was a performer we would have seen actual dyno data from MSD already and these would be flying off the shelves.
|
02-11-2016, 07:58 PM | #12 |
Lethal Camaro
Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013
Location: Temecula, CA
Posts: 3,855
|
yup....
__________________
|
02-11-2016, 08:34 PM | #13 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,873
|
The MSD made about 30 hp on the corvette when tested in Super Chevy or hotrod, can't remember which one it was. But it was the LT1 motor.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
02-11-2016, 09:23 PM | #14 |
Drives: 14 Silverado LTZ Z71, 16 Camaro SS Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 4,408
|
I thought it was the ls7 it showed good gains for....on par with a ported fast intake.
That's the corvette test I recall... |
|
|
Post Reply
|
Tags |
6th gen camaro, airforce, jdp motorsports, lt1, msd |
|
|