Fuse pull for NPP on 2020+ models?

Invertalon · 06-25-2021, 12:33 PM

I tried to search/dig for this, but just came across mostly 2017/2018 models in discussion about the fuse pull.

Any issue in doing so on a 20/21 SS with stock everything?

I assume nothing has changed from earlier years, but given they changed/modified some of the electronic controls, just wanted to check/confirm others have done so with no problem before I pull it to try it out. In particular, a SS/2SS.

Thanks!

Alpha1BC · 06-25-2021, 12:58 PM

Fuse pull should still work the same, just check your fuse box label and make sure the slot of that specific fuse didn't change.

2SS Capt · 06-25-2021, 01:10 PM

Quote:

Originally Posted by Invertalon

I tried to search/dig for this, but just came across mostly 2017/2018 models in discussion about the fuse pull.

Any issue in doing so on a 20/21 SS with stock everything?

I assume nothing has changed from earlier years, but given they changed/modified some of the electronic controls, just wanted to check/confirm others have done so with no problem before I pull it to try it out. In particular, a SS/2SS.

Thanks!

Fuse 51 pulled, works fine on my 2020 2SS with NPP... Have had it pulled for a few months now...

Invertalon · 06-25-2021, 01:41 PM

Awesome, thanks!

Invertalon · 06-26-2021, 02:23 PM

So I pulled the fuse this morning and went for a drive, no problems. Seems about the same as it was before, maybe a touchhhhhh more exhaust noise at low RPM or cruise on the freeway, but it's so slight that at this point might just be placebo!

Either way, I'll try it out for a bit and see if I throw the fuse back in or not.

2SS Capt · 06-26-2021, 03:22 PM

Quote:

Originally Posted by Invertalon

So I pulled the fuse this morning and went for a drive, no problems. Seems about the same as it was before, maybe a touchhhhhh more exhaust noise at low RPM or cruise on the freeway, but it's so slight that at this point might just be placebo!

Either way, I'll try it out for a bit and see if I throw the fuse back in or not.

Typically while cruising between about 1,500 - 2,200 RPM at low throttle settings the valves would close (even in Sport or Track mode), with the fuse pulled they stay open...

06-25-2021, 12:33 PM	#1
Invertalon Drives: 2021 2SS Join Date: Jul 2020 Location: Cleveland Posts: 299	Fuse pull for NPP on 2020+ models? I tried to search/dig for this, but just came across mostly 2017/2018 models in discussion about the fuse pull. Any issue in doing so on a 20/21 SS with stock everything? I assume nothing has changed from earlier years, but given they changed/modified some of the electronic controls, just wanted to check/confirm others have done so with no problem before I pull it to try it out. In particular, a SS/2SS. Thanks!

06-25-2021, 12:58 PM	#2
Alpha1BC Drives: 2017 1SS 1LE Join Date: Jun 2016 Location: Detroit, MI Posts: 1,001	Fuse pull should still work the same, just check your fuse box label and make sure the slot of that specific fuse didn't change. __________________ 2017 SS 1LE.

06-25-2021, 01:41 PM	#4
Invertalon Drives: 2021 2SS Join Date: Jul 2020 Location: Cleveland Posts: 299	Awesome, thanks!

06-26-2021, 02:23 PM	#5
Invertalon Drives: 2021 2SS Join Date: Jul 2020 Location: Cleveland Posts: 299	So I pulled the fuse this morning and went for a drive, no problems. Seems about the same as it was before, maybe a touchhhhhh more exhaust noise at low RPM or cruise on the freeway, but it's so slight that at this point might just be placebo! Either way, I'll try it out for a bit and see if I throw the fuse back in or not.

User Name		Remember Me?
Password