11-30-2018, 07:22 AM | #1 |
Drives: 2018 camaro ZL1 in Nightfall Grey Join Date: May 2016
Location: Louisville ky
Posts: 230
|
Supercharger wine
Any way to make it louder? I have a rotofab cold air intake and I didnt hear any difference thanks again
|
11-30-2018, 07:31 AM | #2 |
Drives: ZL1 Join Date: Nov 2016
Location: US
Posts: 83
|
An NX lid will get the job done!
|
11-30-2018, 08:43 AM | #3 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
NX Lid
Pulley (Requires more parts, and a tune) Don't do exhaust work, you won't hear anything except exhaust Pretty much all you can do. |
11-30-2018, 08:49 AM | #4 |
Drives: 18 ZL1 A10 & 18 2500HD Duramax Join Date: Oct 2012
Location: Chicago, IL
Posts: 733
|
Like he said definitely don’t change your exhaust if you want to hear the blower.. I have a cai, lower pulley, and ported the supercharger and I still can’t hear it inside the cabin.
__________________
Procharged 2018 ZL1 A10
2018 2500HD Duramax |
11-30-2018, 09:51 AM | #5 |
Drives: 69 GTO, 05 GTO, 2018 Silver ZL1 Join Date: Jan 2012
Location: Springfield, OH
Posts: 847
|
"Blower Whine" on YouTube
https://youtu.be/F_wiD-jDfWA Weapon-X cai, Weapon-X Ported TB, and NX lid will get the sound you want...then finish it off with a Weapon-X build and this is your daily sound! |
11-30-2018, 10:57 AM | #6 |
Are you trying to increase the SC sound at idle or WOT?
I have heard the Rotofab and at WOT it is very noticeable. |
|
11-30-2018, 11:18 AM | #7 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
OP you need to get on your cars harder then, i hear that Supercharger wine, more at the track but any time its pushed hard.
|
11-30-2018, 11:35 AM | #8 |
11-30-2018, 11:49 AM | #9 |
Drives: '17 ZL1 Join Date: Jan 2018
Location: Bama
Posts: 99
|
CAI and NX Lid. If you don't want to do the NX Lid then pull the stock lid and remove the sound dampener (Small metal plate with cloth on it held on by 4 screws) that's on the underside. NOTE: The lid has very sharp edges, be careful!
|
11-30-2018, 12:16 PM | #10 |
Drives: Now: GT/PP Vert, Future: ZL1 Vert Join Date: Aug 2018
Location: Vilano Beach, FL
Posts: 66
|
Is supercharger wine anything like turbo beer?
|
11-30-2018, 12:17 PM | #11 |
Drives: Turbo 4, SC V8 and Twin Turbo V8 Join Date: Jan 2014
Location: Vista, CA
Posts: 1,338
|
|
11-30-2018, 04:46 PM | #12 |
Drives: 2018 ZL1 1998 SS 1992 Typhoon Join Date: Nov 2015
Location: RR
Posts: 262
|
I have a rotofab too, Mine screams at WOT but I'm like you and want a little more sound. I'm going to try a sound tube into the cabin.
|
11-30-2018, 06:50 PM | #13 |
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,061
|
NX lid increases whine significantly, but it is pricey. Supposedly it aids in cooling the supercharger too. The NX lid, CAI and a ported TB are about the limit of bolt ons to increase whine, but they do work, especially together. A pulley will add lots of whine and HP, but, as stated already, other parts and a tune are required.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
11-30-2018, 07:24 PM | #14 |
CamaroFans.com
|
^^^This
|
|
|
Post Reply
|
Thread Tools | |
|
|