PDR Component part numbers and install - Page 3

nighttowl · 05-09-2018, 01:27 PM

Quote:

Originally Posted by mbnwa

So I got my HMI today, however I am not sure that they loaded the PDR software as I do not have the PDR icon, however with my HMI the green USB plug was not connected to anything, (/start of assumption) I am thinking that the green plug goes to the HMI from the PDR I assume this is how the touch commands are sent to the PDR

From the looks of the diagram / camera setup I assume the black USB plug goes to the camera

That would leave the blue plug for the SD Card reader.

As far as the two plugs on the other side of the PDR I have no idea where they go at this point in time.
/end of assumption

I need to call the guys who did the PDR software load tomorrow and find out what's up since I have all my parts on the way.

The PDR icon should be on the screen even with nothing hooked up, at least mine is.

Nitro66215 · 05-09-2018, 01:28 PM

Quote:

Originally Posted by nighttowl

The PDR icon should be on the screen even with nothing hooked up, at least mine is.

Correct. I programmed my HMI in my RS to match my ZL1 with the convenience lighting package. Icon is there... but I don't have the accent lighting control module... so it doesn't do anything.

mbnwa · 05-09-2018, 01:38 PM

Quote:

Originally Posted by nighttowl

The PDR icon should be on the screen even with nothing hooked up, at least mine is.

I figured as much, I sent the HMI back to the folks that did the programming to have it reviewed as the front camera option I had added did not seem to function as well.

nighttowl · 05-10-2018, 07:06 AM

The PDR connectors arent labeled. anyone have anything which shows which connector is which?

Nitro66215 · 05-10-2018, 09:36 AM

Quote:

Originally Posted by nighttowl

The PDR connectors arent labeled. anyone have anything which shows which connector is which?

Do you mean X1, X2... etc?

They should be in order.... X1 is typically the one with all of the wires at one end. X6 is the Coax.

Some stuff attached

nighttowl · 05-11-2018, 01:55 PM

I was working with a dealersip on getting the whole dash harness and GM said that they wont sell it to me because they do not want to get involved in a conversion.

Nitro66215 · 05-11-2018, 02:29 PM

Quote:

Originally Posted by nighttowl

I was working with a dealersip on getting the whole dash harness and GM said that they wont sell it to me because they do not want to get involved in a conversion.

Yeah... I wanted the same. Even ordering a cluster wasn't allowed... But I know a guy.... js

mbnwa · 05-11-2018, 03:25 PM

Do you have a part number?

Seeing the post I was asking the question about did not get quoted it was in reference to the dash harness.

Sent from my iPhone using Tapatalk Pro

Nitro66215 · 05-11-2018, 03:27 PM

Quote:

Originally Posted by mbnwa

Do you have a part number?

Sent from my iPhone using Tapatalk Pro

What specifically are you looking for? Lots of people chatting here.... lol.

mbnwa · 05-11-2018, 03:35 PM

Quote:

Originally Posted by Nitro66215

What specifically are you looking for? Lots of people chatting here.... lol.

Sorry for some reason Tapatalk did not quote the post, I was asking if he had the part number for the dash harness

Sent from my iPhone using Tapatalk Pro

Nitro66215 · 05-11-2018, 03:36 PM

Quote:

Originally Posted by mbnwa

Sorry for some reason Tapatalk did not quote the post, I was asking if he had the part number for the dash harness

Sent from my iPhone using Tapatalk Pro

For which vehicle? RS Fully loaded.... SS fully loaded... ZL1? (should be the same....) lol

mbnwa · 05-11-2018, 03:39 PM

Quote:

Originally Posted by Nitro66215

For which vehicle? RS Fully loaded.... SS fully loaded... ZL1? (should be the same....) lol

Hmm maybe the dash harness will not matter for me as they don’t have PDRs in verts, I’m not sure if the 2SS vert / non-vert harness would be different assuming they might be.

Sent from my iPhone using Tapatalk Pro

Nitro66215 · 05-11-2018, 03:41 PM

Quote:

Originally Posted by mbnwa

Hmm maybe the dash harness will not matter for me as they don’t have PDRs in verts, I’m not sure if the 2SS vert / non-vert harness would be different assuming they might be.

Sent from my iPhone using Tapatalk Pro

TBH... the easiest way... look online for the same year car for sale with full options.... call a parts guy and give them that VIN... ask them for the Instrument Panel Harness... they should be able to look it up. When I was told $450 or so (if I remember correctly)... I figured I would just get the connectors, pins, and wire ... do it myself since I have the diagrams.

Nitro66215 · 05-11-2018, 03:45 PM

Quote:

Originally Posted by mbnwa

Hmm maybe the dash harness will not matter for me as they don’t have PDRs in verts, I’m not sure if the 2SS vert / non-vert harness would be different assuming they might be.

Sent from my iPhone using Tapatalk Pro

Greg @ PacePerformance.com is a great source for information / parts.

05-10-2018, 07:06 AM	#32
nighttowl Sarcasm loading -------- Drives: 2018 ZL1 1LE Join Date: Dec 2011 Location: TX Posts: 1,805 View My Garage	The PDR connectors arent labeled. anyone have anything which shows which connector is which? __________________ "The salesman actually told me to stop getting it sideways during the test drive" 2018 MBM ZL1 1LE - Stock 2014 CRT ZL1 574 rwhp, 537 rwtq - SOLD 2010 IBM SS Camaro VVT L99 w/ TR6060 swap, 489 rwhp, 444 rwtq - SOLD

05-11-2018, 01:55 PM	#34
nighttowl Sarcasm loading -------- Drives: 2018 ZL1 1LE Join Date: Dec 2011 Location: TX Posts: 1,805 View My Garage	I was working with a dealersip on getting the whole dash harness and GM said that they wont sell it to me because they do not want to get involved in a conversion. __________________ "The salesman actually told me to stop getting it sideways during the test drive" 2018 MBM ZL1 1LE - Stock 2014 CRT ZL1 574 rwhp, 537 rwtq - SOLD 2010 IBM SS Camaro VVT L99 w/ TR6060 swap, 489 rwhp, 444 rwtq - SOLD

05-11-2018, 03:25 PM	#36
mbnwa Drives: 18 NGM ZL1 1LE Join Date: Apr 2018 Location: Florida Posts: 240 View My Garage	PDR Component part numbers Do you have a part number? Seeing the post I was asking the question about did not get quoted it was in reference to the dash harness. Sent from my iPhone using Tapatalk Pro __________________ PRIOR CAR: 17' Camaro 2SS A8 Vert Upgrades: Pray MSD IM/95mm TB/E85/Tune / Roto-fab CAI / GM Dark Taillights / LED Turn's with VLED Resisters / LED Reverse Lights / JWM Side Markers / Factory UQT PDR (CTS-V) / BMR DSL, MM010 / TSP 1 7/8 / Front Camera / Eyebrow Harness / Elite Engineering E2-X / AEM Wideband with Aeroforce single pod / HD Radio / OnStar Delete / RPM Roll Bar Last edited by mbnwa; 05-11-2018 at 03:36 PM.

User Name		Remember Me?
Password