08-13-2017, 07:58 PM | #1 |
Drives: 2018 Camaro 1SS Join Date: Jul 2017
Location: MD
Posts: 247
|
2018 1SS non Bose amp?
so the colors i have on the harness closest to the rear of the car dont match what people have said to cut... im trying to get the noise out of my sub. ive heard to cut the green and green with black. this is what my harness has, any help. alos heard about disconnecting MIC in the door as well. i have door panels off so now would be a great time to do it. does anyone have more info. i did a search but there are so many mixed reports. thanks guys
|
08-13-2017, 10:02 PM | #2 |
Bigg Balls
|
I think it's green with black and blue with black
|
08-13-2017, 10:04 PM | #3 |
Bigg Balls
|
I just left my harness disconnected. Still have all the stuff even with it not connected
|
08-13-2017, 11:18 PM | #4 |
Drives: 2018 Camaro 1SS Join Date: Jul 2017
Location: MD
Posts: 247
|
hav'nt tried that yet, ill try tomorrow. My turn signals and chime are LOUD as fuk lol
|
08-14-2017, 08:23 AM | #5 |
Bigg Balls
|
Yup that's my problem too.
|
08-14-2017, 08:42 AM | #6 |
Drives: 2017 Chevrolet Camaro 2.0 LT Join Date: Apr 2017
Location: Dillsboro, NC
Posts: 202
|
on my non-bose amp I just disconnected both the door mics, and hum/throb gone. I did not want to cut anything at the harness, so I could always restore it in a few minutes.
|
08-14-2017, 01:19 PM | #7 |
Drives: 2018 Camaro 1SS Join Date: Jul 2017
Location: MD
Posts: 247
|
|
08-14-2017, 01:32 PM | #8 |
Drives: 2017 Chevrolet Camaro 2.0 LT Join Date: Apr 2017
Location: Dillsboro, NC
Posts: 202
|
Take door panel off, and look on the opposite side of the cutouts/holes for the mic. Its just a little plug you unhook on each door panel.
|
|
|
Post Reply
|
|
|