[parish8]

I am considering upgrading to something really outrageous but only if i can sell what I have.

There are a ton of pics in my build thread in my sig or friend me on Facebook and you can look at my camaro album.

The basic set up is twin precision 6266 turbos low mounted. Twin precision or tial(can’t remember) wg’s and a tial bov. Exhaust manifolds, turbo adapters, ~2’ of exhaust with o2 bungs, wg dumps. All charge pipes, a massive air/air g1pro intercooler and a g1pro made upper charge pipe with maf flange. Turboworks exa oil return pump(the $400 one), all oil feed lines and return lines.

I am looking for $6k for everything above plus shipping. One turbo did eat part of an exhaust valve but will be repaired by precision before I sell the kit.

Looking for $6000. There was a small amount of clearancing required above the turbos and you will need to attach your exhaust. Other than that the kit bolts on.

On e85 at just 3psi I was beating stock hellcats. At 20psi(cam and drop ins) it ran 155 mph in the 1/4.

I also have an msd intake with some ~1100cc injectors from deashwerks and fuel rails. I would let this go for $1000 but only if your buying the turbo kit.

I also have complete stock exhaust with dumps that bolts to the kit with vband clamps but I am not shipping it. This would be free if you pick the kit up. I am not shipping it. The dod valves have been removed and the dual mode exhaust valves are stuck open. Electric dumps not included.

Some of the parts could use some fresh exhaust wrap.

[Tim M]

That seems like a bargain...!

[chross12]

Really great value, surprised no one has jumped on it.

[FASTRNL]

DM sent

[TheDamme94]

how much would you sell the Mani, injectors and rails if you sell the kit but not the IM setup?

[parish8]

most of this has been sold, what hasn't sold I am keeping for now. thanks for you interest