08-14-2019, 04:05 AM | #1 |
Drives: Chevrolet Camaro 2018 SS Join Date: Feb 2019
Location: Czech Republic
Posts: 42
|
Ceiling light connector.
Hi, I need to do power for the camera. I know that Gen5DIY produces exactly such a cable, but unfortunately I'm not from the US and its price is too high (along with shipping).
Electronics do not make me a problem, but I can not find out what type of connector it is. One of the possible manufacturers could be MOLEX but I could not find it. Does anyone know the manufacturer and the type of this connector and counterpart? Of course, if someone had a scheme, it would save time. Thank you very much for the information. |
08-14-2019, 03:05 PM | #2 |
Black for ground, Violet/white for 12v ignition power
You can get a service manual on ebay for cheap.. in the back has all the wiring diagrams |
|
08-15-2019, 02:52 AM | #3 |
Drives: Chevrolet Camaro 2018 SS Join Date: Feb 2019
Location: Czech Republic
Posts: 42
|
Thanks for the information. I wanted to avoid these "Thieves" and use the original connector. Unfortunately, I can't find his name anywhere.
Anyway, I plan to get the service manual over time. |
08-15-2019, 05:53 AM | #4 |
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 4,975
|
You could try looking at a site similar to this:
https://www.eficonnection.com/home/c...ive-connectors |
08-15-2019, 06:20 AM | #5 |
Drives: Chevrolet Camaro 2018 SS Join Date: Feb 2019
Location: Czech Republic
Posts: 42
|
There is a great chance that this is the connector. But nowhere can I find where to get it.
https://www.oreillyauto.com/detail/b.../2493209?pos=1 |
08-15-2019, 10:56 PM | #6 |
Drives: 2018 Chevrolet Camaro 2LT Join Date: Mar 2019
Location: Edmonton, Alberta, Canada
Posts: 107
|
It looks to be a JST HCM connector: HCMPB-C06A-S
http://www.jst-mfg.com/product/pdf/e...?5d562922cf6fc https://cz.mouser.com/ProductDetail/...aX78FKCzuCs%3D |
08-20-2019, 08:00 AM | #7 |
Drives: Chevrolet Camaro 2018 SS Join Date: Feb 2019
Location: Czech Republic
Posts: 42
|
Done, but I did it from local sources. Double 2pin connector glued together, soldered to wiring and insulated. Then there are two 2pin connectors, one for the camera and the other in the future for anti-radar.
|
|
|
Post Reply
|
|
|