2020 LT1 6spd TCM on. 0-60 4.8 sec (edited)

ThirdGenNut · 01-11-2020, 05:00 PM

So I bought into the hype. Picked up the lt1. I like it but.... My v6 Challenger absolutely rapes this thing with the traction control on.

What are your 0-60 times with a manual and the nannies on?

*radz28* · 01-12-2020, 04:00 PM

With respect... what did you expect to run with TC on? It isn't going to run it's fastest, that's for sure. Maybe I'm missing something...

HCI2000SS · 01-12-2020, 05:59 PM

Even with the TC on it should be WAY faster than 6.9.

arpad_m · 01-12-2020, 06:19 PM

No way an LT1 does a near 7-second 0-60, even with traction control on, something's not right here. Can you post a video?

95 imp · 01-12-2020, 07:12 PM

Finding this hard to believe....

vtirocz · 01-13-2020, 06:25 AM

Something is not adding up. I’m assuming you revved to a high engine speed and dumped the clutch and traction control needed to aggressively pull back power. What were the ambient temps? Very cold?

You probably just need some practice. I’d recommend attending some test and tune nights when your local drag strip opens to dial in your time. You should be able to get down to low 4’s.

ThirdGenNut · 01-13-2020, 04:37 PM

You guys are right I do need more practice but man 6.9!? I'm using one of those obd2 readers to get the time. I'm not trying to boil the tires, just get the car rolling and mat it.

*radz28* · 01-13-2020, 04:43 PM

Wasn't trying to come off a smart-@$$ or anything; just trying to be helpful

It's probably like you and others have said: just seat time. Maybe, when funds permit: get some good tires to help hook up. If you're goofing off on the street, it will make it harder on OEM tires, because there's not a lot of grip to be had in a lot of circumstances.

Just more practice

ThirdGenNut · 01-13-2020, 04:54 PM

Quote:

Originally Posted by radz28

Wasn't trying to come off a smart-@$$ or anything; just trying to be helpful

It's probably like you and others have said: just seat time. Maybe, when funds permit: get some good tires to help hook up. If you're goofing off on the street, it will make it harder on OEM tires, because there's not a lot of grip to be had in a lot of circumstances.

Just more practice

No offense taken.

I would still like to know what time I should shoot for with the TC on.

ThirdGenNut · 01-13-2020, 05:00 PM

I noticed my tire pressures are at 37 psi. I should probably get those down. Also Wife was in the car.
My worst 0-60 in the challenger was 6.4.

ThirdGenNut · 01-13-2020, 05:03 PM

Just one more thing before I log off.
I did crush a 3 series tesla with the wife in the car.
When I chirped 2nd he gave up.

s346k · 01-13-2020, 06:12 PM

chirpin gears and pullin brodies gets em every time.

TJay74 · 01-14-2020, 10:01 AM

I would set the tires as per the door sticker on the drivers side door at the cold temp. If you leave the T/C on the computer can intervene enough to destroy the 0-60 times. Also the hose BT OBD2 programs are not the greatest at measuring time accurately. Best way is to use a stop watch and the old fashion method.

Umbriel · 01-14-2020, 10:27 AM

Does the LT1 not have the timers in them? I would use those before an OBD2 timer, those things are not accurate.

01-11-2020, 05:00 PM	#1
ThirdGenNut Drives: 2020 LT1 Join Date: Nov 2019 Location: Tampa, FL Posts: 187	2020 LT1 6spd TCM on. 0-60 4.8 sec (edited) So I bought into the hype. Picked up the lt1. I like it but.... My v6 Challenger absolutely rapes this thing with the traction control on. What are your 0-60 times with a manual and the nannies on? Last edited by ThirdGenNut; 01-18-2020 at 04:47 PM.

01-12-2020, 04:00 PM	#2
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,192 View My Garage	With respect... what did you expect to run with TC on? It isn't going to run it's fastest, that's for sure. Maybe I'm missing something... __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

01-12-2020, 06:19 PM	#4
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,602 View My Garage	No way an LT1 does a near 7-second 0-60, even with traction control on, something's not right here. Can you post a video? __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

01-13-2020, 06:25 AM	#6
vtirocz Drives: 2017 Camaro 1SS M6 Join Date: Apr 2015 Location: Indy Posts: 2,460	Something is not adding up. I’m assuming you revved to a high engine speed and dumped the clutch and traction control needed to aggressively pull back power. What were the ambient temps? Very cold? You probably just need some practice. I’d recommend attending some test and tune nights when your local drag strip opens to dial in your time. You should be able to get down to low 4’s. __________________ 2017 Camaro 1SS, M6, Hurst shifter, Hyper Blue, NPP, Gray Split Spoke Wheels Best 1/4 Mile: 12.24 @ 115.9 mph

01-13-2020, 04:43 PM	#8
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,192 View My Garage	Wasn't trying to come off a smart-@$$ or anything; just trying to be helpful It's probably like you and others have said: just seat time. Maybe, when funds permit: get some good tires to help hook up. If you're goofing off on the street, it will make it harder on OEM tires, because there's not a lot of grip to be had in a lot of circumstances. Just more practice __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

01-12-2020, 05:59 PM	#3
HCI2000SS Drives: 2018 Camaro V6/RS Join Date: Nov 2018 Location: MI Posts: 1,596	Even with the TC on it should be WAY faster than 6.9.

01-12-2020, 07:12 PM	#5
95 imp Dumb Ass Deluxe Drives: A Tricked Out Mountain Bike Join Date: Jun 2019 Location: Arizona Posts: 1,959	Finding this hard to believe....

01-13-2020, 04:37 PM	#7
ThirdGenNut Drives: 2020 LT1 Join Date: Nov 2019 Location: Tampa, FL Posts: 187	You guys are right I do need more practice but man 6.9!? I'm using one of those obd2 readers to get the time. I'm not trying to boil the tires, just get the car rolling and mat it.

01-13-2020, 05:00 PM	#10
ThirdGenNut Drives: 2020 LT1 Join Date: Nov 2019 Location: Tampa, FL Posts: 187	I noticed my tire pressures are at 37 psi. I should probably get those down. Also Wife was in the car. My worst 0-60 in the challenger was 6.4.

01-13-2020, 05:03 PM	#11
ThirdGenNut Drives: 2020 LT1 Join Date: Nov 2019 Location: Tampa, FL Posts: 187	Just one more thing before I log off. I did crush a 3 series tesla with the wife in the car. When I chirped 2nd he gave up.

01-13-2020, 06:12 PM	#12
s346k Drives: like an old lady Join Date: Jun 2012 Location: indiana Posts: 2,395	chirpin gears and pullin brodies gets em every time. __________________ 2016+ camaro: everyone’s first car

01-14-2020, 10:01 AM	#13
TJay74 Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016 Location: Norman, OK Posts: 2,424	I would set the tires as per the door sticker on the drivers side door at the cold temp. If you leave the T/C on the computer can intervene enough to destroy the 0-60 times. Also the hose BT OBD2 programs are not the greatest at measuring time accurately. Best way is to use a stop watch and the old fashion method. __________________ 2019 Corvette Z06 2LZ A8 - Halltech CAI, AWE non-catted X-pipe, Mamo V2 ported TB 592rwhp, bone stock 566rwhp 2017 Camaro SS 1LE - Procharger D1SC w/ Tial 2" BOV & Race intercooler / ARH full length catless headers / Alky meth injection system - 650rwhp on conservative tune SOLD

01-14-2020, 10:27 AM	#14
Umbriel Drives: 2016 Camaro SS Join Date: Sep 2018 Location: Bartlett, TN Posts: 1,121	Does the LT1 not have the timers in them? I would use those before an OBD2 timer, those things are not accurate.

User Name		Remember Me?
Password