05-26-2021, 05:41 PM | #1 |
Drives: 2016 Camaro SS Join Date: Jul 2016
Location: Korea
Posts: 417
|
Where can I get 112mm snout for maggi 2650?
I tried to find it , but only found for C7 2650 snots not for Camaro6.
Any advise for it? Thank you in advance. |
06-25-2021, 06:42 AM | #2 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
can the 103mm be ported assuming you have a 103 then use weaponXs 112 adapter?
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
07-08-2021, 01:38 PM | #3 |
Petro-sexual
|
I think Jannetti had to have one fab'd up. Magnuson said they were working on one, but that was like a few years ago now...
You might be able to port a 103 snout for some extra room, but I'm not sure there's a lot of meat. I know I was barely able to open the stock-size snout for a 95 TB.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
07-16-2021, 09:29 AM | #4 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
Cut the flange off and changed the angle some and welded on a 112 flange. The Corvette one it just too far off for the Camaro. It seems that when Toohighpsi left Magnuson alot of stuff went on the back burner. Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
07-17-2021, 05:20 PM | #5 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Yes it did.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
Post Reply
|
|
|