03-26-2020, 12:04 PM | #1 |
Drives: 2019 Camaro ZL1 Join Date: Mar 2020
Location: Chesapeake, Virginia
Posts: 10
|
Drag pack for 2019 ZL1
Has anyone put wheels and tires all the way around on their 19 ZL1? Having quite the time getting specs and need to figure this out. I currently have a 20inch wheel with MT Et Street SS on the rear. Racing street points here soon once this mess goes away so want to be right when it starts. Any help is much appreciated....would even accept a rear tire and wheel option at this time.
|
03-26-2020, 02:29 PM | #2 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,786
|
I believe you can run a 18x5 front and 17x10 rear and run a 305/45/17 drag radial or 28" slick.
https://www.camaro6.com/forums/showthread.php?t=488498
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
03-26-2020, 04:53 PM | #3 |
Drives: 6th Gen NicKey Camaro & others. Join Date: Nov 2015
Location: Loves Park, Illinois
Posts: 492
|
That is what we run in the rear on Weld Wheels. Still need to fit the fronts. will advise.
|
03-26-2020, 05:06 PM | #4 |
Life's Short, Live Fast!
Drives: 2017 Hyper Blue A10 ZL1 Join Date: Nov 2016
Location: London, KY
Posts: 2,015
|
I have a 17x10.5 rear with a +32 offset. Would really prefer around a +38 offset, but it works with the shorter tire I'm currently running.
__________________
Life's Short, Live Fast! https://youtu.be/rTUv2p4T7OA 10.94 at 128 mph, 11.13 at 127mph 870 DA, https://youtu.be/e_X_LcpFp50 11.19 at 127mph 1100 DA, https://youtu.be/OXQiCQdQuH4 11.40 at 125mph 1800 DA
https://youtu.be/uWba1qs8M6Q 11.52 at 123mph 3500 DA TZQPHG '17 ZL1 HBM|A10|Nav|PDR|CFW Hood|ZL1 Mats 12/26/2016 Ordered! 2/8/2017 Built!! 3/2/2017 Brought Home!!! |
03-26-2020, 08:51 PM | #5 |
Drives: 2019 Camaro ZL1 Join Date: Mar 2020
Location: Chesapeake, Virginia
Posts: 10
|
Thanks for the replies. That's a start for sure....it ran a 7.09 in the 1/8 last time I was out a few weekends ago but now everything is halted here locally. I'm wondering if the lighter wheels will help some....
|
03-27-2020, 07:31 AM | #6 |
Life's Short, Live Fast!
Drives: 2017 Hyper Blue A10 ZL1 Join Date: Nov 2016
Location: London, KY
Posts: 2,015
|
What's done to the car? That's a solid time.
__________________
Life's Short, Live Fast! https://youtu.be/rTUv2p4T7OA 10.94 at 128 mph, 11.13 at 127mph 870 DA, https://youtu.be/e_X_LcpFp50 11.19 at 127mph 1100 DA, https://youtu.be/OXQiCQdQuH4 11.40 at 125mph 1800 DA
https://youtu.be/uWba1qs8M6Q 11.52 at 123mph 3500 DA TZQPHG '17 ZL1 HBM|A10|Nav|PDR|CFW Hood|ZL1 Mats 12/26/2016 Ordered! 2/8/2017 Built!! 3/2/2017 Brought Home!!! |
03-27-2020, 09:17 AM | #7 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
The lighter wheels will help. The average stock wheel and tire will be over 60 lbs each. You'll save the most on the fronts as the drag radials are fairly heavy but the wheels will be lighter unless you choose a bead lock for the rear. I run a 17x10.5 Race Star rear which are not bead locks with 305 45 17 MT and use a Permatex hightac sealant to keep them from spinning on the wheel and they will if you don't seal them.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
03-27-2020, 06:36 PM | #8 |
Drives: 2019 Camaro ZL1 Join Date: Mar 2020
Location: Chesapeake, Virginia
Posts: 10
|
Just an cold air intake and Corsa exhaust. I was running a Copo at the Loose Rocker so held a few numbers to run him out the back but he went red so ran it out. .
|
03-27-2020, 06:39 PM | #9 | |
Drives: 2019 Camaro ZL1 Join Date: Mar 2020
Location: Chesapeake, Virginia
Posts: 10
|
Quote:
|
|
04-02-2020, 06:22 PM | #10 |
Drives: 2019 Camaro ZL1 Join Date: Mar 2020
Location: Chesapeake, Virginia
Posts: 10
|
Ok heads up for ZL1 owners. The VMS wheels will not fit a 2019. They are within a business card distance of the brake caliper which to me seems tight?? I dont like them being that close to my calipers so now I guess I'll return them to where they came from.
|
04-05-2020, 10:55 AM | #11 |
Drives: 2017 Chevy Camaro 2SS Join Date: Dec 2019
Location: Rockwall TX
Posts: 15
|
yes just received mine a few days ago and went to put them on last night and yes they are tight and hell 1 wheel didnt even fit so i need to call them tomorrow to see what they will do pisses me off after dropping over 1k on brand new wheels that 1 doesnt fit and reached out to them via email but no response yet probably because of the weekend though
|
04-05-2020, 10:57 AM | #12 |
Drives: 2017 Chevy Camaro 2SS Join Date: Dec 2019
Location: Rockwall TX
Posts: 15
|
a buddy of mine who also has a 2019 Zl1 bought the F14s from summit direct fit just in case you wanted to know
|
04-09-2020, 04:17 PM | #13 |
Drives: 2019 SS Join Date: Apr 2020
Location: North Texas
Posts: 259
|
|
04-09-2020, 05:48 PM | #14 |
Drives: 6th Gen NicKey Camaro & others. Join Date: Nov 2015
Location: Loves Park, Illinois
Posts: 492
|
I fit the Forgestar D5s on the front / 18"x5” and they clear the ZL1 calipers and are good for 2017,2018,2019,2020 SS and ZL1.
|
|
|
Post Reply
|
Thread Tools | |
|
|