08-31-2019, 07:31 PM | #29 | |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
Quote:
Now you can add a secondary MAP sensor and use it as a barometer sensor (DSX Baro Breakout Harness), but you should put it relatively near the air intake. What can happen there is that this sensor will see air pressure build / fall with vehicle speed. (I have this setup on my car - pressure can rise as much as 1-1.2lbs from 0 to 80mph. Again if the gauge is giving a boost number based on MAP minus the Baro sensor, you aren't getting a real accurate number. On my car that has a BOV for the centrifugal S/C - the valve doesn't really close at the point at which atmosphere pressure is. On average, our pressure is 14.0-14.2 lbs, the valve tends to start closing at 10-11lbs on my MAP gauge as there is boost in the intake manifold. I wish these gauges would allow a easier way to just integrate a real boost pressure
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
|
09-04-2019, 06:36 PM | #30 |
@Blackmamba_1LE
Drives: 2017 1LE Join Date: Jun 2017
Location: South Florida
Posts: 740
|
Yup, just got the update today and E% is now available. They sent me the test firmware before they make it available to general public.
Look at the bottom left PiD (green screen) Other stuff that I now see activated (which weren't visible before are): Gear selection output shaft speed auto-dimming density altitude (is one of the patented PiD's from Banks)
__________________
OG: Pray Perf FBO ET:11.5 @119 THEN:LT4 SC, E85 + Meth :10.6 @135 NOW: H/C Whipple 416ci
Last edited by G2K; 09-04-2019 at 06:50 PM. |
09-04-2019, 06:48 PM | #31 |
@Blackmamba_1LE
Drives: 2017 1LE Join Date: Jun 2017
Location: South Florida
Posts: 740
|
Another thing that I learned in my time using the gauge is it actually screenshots parameters that trigger a "CEL" . This time I had a check light come one and when I did the diagnostics I can actually enter the code and it showed the PiD's that affect this...
Second picture you can see my CEL code had to with my STFT going to -40% this happened when I switched to 93oct and the car was still adjusting letting me know that this was nothing to worry about... I proceeded to clear the code (via same gauge) and on to my normal life... Great feature and just love the way it looks. Regarding updates, all it took was a simple download to a micro SD and that's it!!!! No sending in, no having to buy another gauge.... this will make the gauge never obsolete. The 3rd picture is how the alerts pop up... super visible and at night brightness goes up for easy attention
__________________
OG: Pray Perf FBO ET:11.5 @119 THEN:LT4 SC, E85 + Meth :10.6 @135 NOW: H/C Whipple 416ci
Last edited by G2K; 09-05-2019 at 11:54 AM. |
09-04-2019, 08:36 PM | #32 | |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,751
|
Quote:
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
09-05-2019, 07:31 AM | #33 | |
@Blackmamba_1LE
Drives: 2017 1LE Join Date: Jun 2017
Location: South Florida
Posts: 740
|
Quote:
These are my 2/3 screens right now: I can setup up to 5 in total with 2-8 PiD's visible at the same time
__________________
OG: Pray Perf FBO ET:11.5 @119 THEN:LT4 SC, E85 + Meth :10.6 @135 NOW: H/C Whipple 416ci
|
|
09-05-2019, 09:53 AM | #34 |
Drives: 2017 50th Anniversary 2SS Join Date: Sep 2016
Location: Jacksonville, FL
Posts: 930
|
I must say that is very nice!. I definitely like the warnings you can setup on it. Do you know if it allows you to build any sort of custom alert like for example if you wanted to setup an alert if Fuel Pressure drops below a certain number but only if it's a WOT?
|
09-05-2019, 11:49 AM | #35 | |
@Blackmamba_1LE
Drives: 2017 1LE Join Date: Jun 2017
Location: South Florida
Posts: 740
|
Quote:
This is something I will bring up to them, maybe they can make it work. This gauge does a lot more complicated stuff so maybe it's just something that hasn't been brought up to them (just like E85 readings)
__________________
OG: Pray Perf FBO ET:11.5 @119 THEN:LT4 SC, E85 + Meth :10.6 @135 NOW: H/C Whipple 416ci
|
|
02-22-2020, 11:04 PM | #36 |
Drives: 2018 Chevrolet camaro Join Date: Feb 2020
Location: NEBRASKA
Posts: 5
|
Where did you get you guage pods for them at? I love this setup!
|
02-23-2020, 07:37 AM | #37 | |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,751
|
Quote:
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
04-02-2020, 08:10 PM | #38 |
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
G2K, did you purchase the DataMonster or the SuperGauge? It appears both of them take an SD card. If that’s the case than I’d believe the firmware could be flashed in both. I don’t need the DataMonster because I log in HPT.
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
04-03-2020, 07:44 AM | #39 |
2018 SS A8 11.85@117.06
Drives: 2018 Camaro SS A8 "Dark Knight" Join Date: Oct 2019
Location: MICHIGAN
Posts: 212
|
purchased super gauge from Summit Racing went to install it no go, have a ticket in with banks. I think i need firmware update and sim card too.
|
04-05-2020, 09:17 AM | #40 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
i still like my v3.. always hated gauge pods..
that being said.... the banks gauge looks really nice. i wonder if you could get creative and make it like the v3 vent gauge, if you see how they made the v3 you could probably get most gauges to fit in there..
__________________
2018 2ss 1le roto fab dry, Stainless works 1 7/8 lt to 3'" x pipe with highflow cats to stock npp, soler 95mm t/b, edelbrock 2300, LT4 fueling , jms bap and dsx flex fuel, 618/620 on e45 rwhp
Jannetty Motorsports tuned |
04-05-2020, 11:26 AM | #41 |
Drives: 2018 Camaro SS Join Date: Sep 2009
Location: Oklahoma
Posts: 239
|
It comes with the original software from when they first created it or at least mine did. I updated mine right after installing it and then it worked no problem on my 2018 SS. Straight out of the box it didn’t have many of the features and was wonky in operation. Go to the banks site and get the latest software
|
04-05-2020, 01:54 PM | #42 | |
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
Quote:
Vent grille 84091802 https://www.tascaparts.com/oem-parts...rille-84091802 Trim bezel 23170854 https://www.tascaparts.com/oem-parts...bezel-23170854
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ Last edited by Trochoidal; 04-05-2020 at 04:03 PM. Reason: Changed wording |
|
|
|
Post Reply
|
|
|