Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > ZL1 Discussions


AWE Tuning


Post Reply
 
Thread Tools
Old 06-02-2022, 12:24 PM   #1
LexLuthor
 
LexLuthor's Avatar
 
Drives: 2018 Camaro ZL1 1LE
Join Date: Mar 2022
Location: Phoenix, AZ
Posts: 2
Header clearance/exhaust rattle

Anyone running 2” headers have issue with them vibrating on the metal crossmember? Mine seems to rattle against it when decelerating and around 2K rpm’s. Everything they on the exhaust seems tight and it’s the only thing I can think of that would be causing the noise. Or does anyone else have any ideas of what it could be? Thanks for the help!
LexLuthor is offline   Reply With Quote
Old 06-02-2022, 03:58 PM   #2
AZIROC
 
Drives: '86 IROC-Z '18 ZL1
Join Date: Jul 2019
Location: Arizona
Posts: 731
What brand? And how many miles you got? Wo der if a motor mount is going bad.
AZIROC is offline   Reply With Quote
Old 06-02-2022, 08:49 PM   #3
Readr1
 
Drives: 2018 ZLE
Join Date: Nov 2021
Location: DFW
Posts: 32
Iv'e got TSP 2" on mine and the only contact it makes is barely grazing the steering shaft bolt. I need to pull it and grind off the threads that are sticking out by about a MM to get clearance. It is real close to the subframe and but doesn't quite touch.
Readr1 is offline   Reply With Quote
Old 06-02-2022, 09:32 PM   #4
20Bluezl1

 
Drives: 2020 Zl1 A10 Riverside Blue
Join Date: Mar 2020
Location: NJ
Posts: 1,211
I have 2" ARH and no rattling
20Bluezl1 is offline   Reply With Quote
Old 06-02-2022, 09:39 PM   #5
Trochoidal

 
Drives: 2017 Camaro 2SS A8
Join Date: May 2019
Location: USA
Posts: 1,656
Quote:
Originally Posted by LexLuthor View Post
Anyone running 2” headers have issue with them vibrating on the metal crossmember? Mine seems to rattle against it when decelerating and around 2K rpm’s. Everything they on the exhaust seems tight and it’s the only thing I can think of that would be causing the noise. Or does anyone else have any ideas of what it could be? Thanks for the help!
Are you referring to the tunnel brace? If you are you can just put a couple of washers between the brace and the body. Or you can purchase after market brace.

https://shop.halosupercars.com/produ...1&categoryId=7

http://m.bmrsuspension.com/?page=pro...D6943AB9103C78

https://www.bmrsuspension.com/sitear...all/DTB005.pdf
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod

Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“
Trochoidal is offline   Reply With Quote
Old 06-02-2022, 10:16 PM   #6
LexLuthor
 
LexLuthor's Avatar
 
Drives: 2018 Camaro ZL1 1LE
Join Date: Mar 2022
Location: Phoenix, AZ
Posts: 2
They are texas speed. Car has 27.5K miles on it. I guess I need to get under it again and double check all the exhaust hardware. I also thought maybe a motor mount has gone bad but with under 28K miles it seemed unlikely.
LexLuthor is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:09 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.