04-25-2022, 10:48 AM | #1 |
Drives: '20 ZL1 M6 Join Date: Apr 2017
Location: FT. Lauderdale, FL
Posts: 717
|
Anyone know what this is?
Found this today next to the gas pedal. I recently had the clutch slave cylinder replaced. Maybe related to that?
__________________
Mal
Ft. Lauderdale, FL '20 Camaro ZL1 M6 '22 Kawasaki ZX-14R |
04-25-2022, 10:59 AM | #2 |
Petro-sexual
|
Firewall plug?
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // TooHighPSI Port Injection // FF // Katech Dual In-Tank // Soler 103 // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
04-25-2022, 10:59 AM | #3 |
Petro-sexual
|
Or maybe around the steering column and trim?
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // TooHighPSI Port Injection // FF // Katech Dual In-Tank // Soler 103 // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
04-25-2022, 11:12 AM | #4 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,111
|
That is the plug that covers up the bolt on the gas pedal mount to the floorboard. What do i win?
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| Borla S-Type Catback Exhaust| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
04-26-2022, 05:31 AM | #5 |
Drives: '20 ZL1 M6 Join Date: Apr 2017
Location: FT. Lauderdale, FL
Posts: 717
|
My undying gratitude and you can drive my M6.
__________________
Mal
Ft. Lauderdale, FL '20 Camaro ZL1 M6 '22 Kawasaki ZX-14R |
04-26-2022, 10:10 AM | #6 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,111
|
Was that what it was tho?
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| Borla S-Type Catback Exhaust| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
04-26-2022, 10:16 AM | #7 |
Drives: '20 ZL1 M6 Join Date: Apr 2017
Location: FT. Lauderdale, FL
Posts: 717
|
It looks like it. The bolt is exposed. It is supposed to be? But, I'll be damned if I can get that rubber thing to pop back in that hole. I tried a little WD40, but so far no go. Can you point me to a parts diagram?
__________________
Mal
Ft. Lauderdale, FL '20 Camaro ZL1 M6 '22 Kawasaki ZX-14R |
04-26-2022, 11:53 AM | #8 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,111
|
The bolt shouldn't be exposed. Takes a little force because it shouldn't be easy to remove, I believe the "squared" side goes towards the pedal itself, it's fitted for the actual hole so try rotating it.
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| Borla S-Type Catback Exhaust| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
04-26-2022, 01:35 PM | #9 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,494
|
The rubber cover goes in with very little pressure, you probably oriented it wrong. Don't try to force it, it should just snap in.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
04-26-2022, 01:57 PM | #10 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,111
|
That's what she said.....
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| Borla S-Type Catback Exhaust| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
|
|
Post Reply
|
Thread Tools | |
|
|