Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


Phastek Performance


Post Reply
 
Thread Tools
Old 10-13-2017, 07:39 AM   #15
DSX Tuning
 
Drives: 2018 Colorado ZR2/2019 Corvette ZR1
Join Date: May 2017
Location: St. Louis, MO
Posts: 311
To be clear, DMS is a reseller of DSX items.

To purchase my things direct, head to www.dsxtuning.com.

The photo on their site is a version they originally made. My system only has two fuel lines, no regulator, and doesn't use a Hobbs switch (I use a CAN controller).
DSX Tuning is offline   Reply With Quote
Old 10-17-2019, 09:59 AM   #16
Choda
 
Drives: Turbo 6.2
Join Date: Feb 2019
Location: Buffalo
Posts: 110
Quote:
Originally Posted by DSX Tuning View Post
To be clear, DMS is a reseller of DSX items.

To purchase my things direct, head to www.dsxtuning.com.

The photo on their site is a version they originally made. My system only has two fuel lines, no regulator, and doesn't use a Hobbs switch (I use a CAN controller).
I really like the idea of using the MAP instead of a hobbs switch. this alone puts you above the other kits. My question is can the "on" boost activation be changed from 10psi to something lower like 4 or 5?
__________________
2016 Turbo Camaro - 730hp/780tq
2018 LTZ Z71 Redline Silverado - 381hp/420tq
Choda is offline   Reply With Quote
Old 10-17-2019, 10:28 AM   #17
KingLT1


 
KingLT1's Avatar
 
Drives: 2016 1SS NFG A8
Join Date: Aug 2017
Location: 46804
Posts: 2,765
Yes it's been done before. Oldman had his programmed for 4psi I believe.

That being said I have heard others say they prefer hobbs switch over the map controller because of odd fueling on the hit. I don't know any more details...I am sure they both work fine when setup correctly.
__________________
2016 NFG 1SS A8
Options-[2SS Leather/NPP]
Perf. mods-[Whipple 2.9/LPE LT5 TB/Rotofab Dry/LT4 Fueling/Flex Fuel/CA ORP/FM NPP Axle back]
KingLT1 is offline   Reply With Quote
Old 10-17-2019, 02:21 PM   #18
laynlo15
 
laynlo15's Avatar
 
Drives: 2016 1ss A8, Npp
Join Date: Nov 2015
Location: clark, mo
Posts: 5,316
I will be doing something this winter on a low side fuel system.
__________________
2016 Camaro 6.2, Magnuson 2650 Heartbreaker, RotoFab, Manley, Livernois cam, stock heads trans/converter/diff. Kentshotrodgarage (M/T,Hoosier, Racestar Wheels), RPM RB, DSS, Gforce, Griptec Pulley Best 9.41@146 Best MPH 149 1/4, 5.99@119 Best MPH 120 Best 60' 1.35. RWHP? Just a little Magnuson Employee/Driver
laynlo15 is offline   Reply With Quote
Old 10-17-2019, 03:46 PM   #19
Umbriel
 
Drives: 2016 Camaro SS
Join Date: Sep 2018
Location: Bartlett, TN
Posts: 714
I went with a Crawford Racing port injection system, great quality and Chris is super helpful and very nice. It isn't cheap but now I have 1400 hp worth of fuel if I ever want to go that far, which I will.
Umbriel is offline   Reply With Quote
Old 10-17-2019, 03:46 PM   #20
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 14,690
Quote:
Originally Posted by exxit View Post
I'm wondering if just the aux fuel system will cut it without a cam, high side, low side, injectors etc etc
Looking at your build absolutely not, you will need all of the above.
__________________
www.jannettyracing.com
Celebrating 34 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 10-18-2019, 09:41 AM   #21
EDFHOBBIES


 
EDFHOBBIES's Avatar
 
Drives: 16 SS & 17 ZL1 Both Yellow
Join Date: Jan 2014
Location: Houston
Posts: 2,843
Send a message via Skype™ to EDFHOBBIES
Quote:
Originally Posted by Umbriel View Post
I went with a Crawford Racing port injection system, great quality and Chris is super helpful and very nice. It isn't cheap but now I have 1400 hp worth of fuel if I ever want to go that far, which I will.
That's the way to do it..

It's funny back in the 5th gen days the Tuners were all saying do not slouch on the fuel system you will blow something up.. its not worth it. Spend the money on the fuel system do not go cheap on this part of the build!

What happen to that preaching? Seems like its more critical on the 6 gen since you can't just tune of off good AFR's. Low side or high side falls of even with good AFRs chances are somethings gonna break..

And what happen to the consensus saying use meth only for cooling do not rely on it for fueling that went out the door to or what?
__________________
EDFHOBBIES is offline   Reply With Quote
Old 10-18-2019, 11:24 AM   #22
Choda
 
Drives: Turbo 6.2
Join Date: Feb 2019
Location: Buffalo
Posts: 110
Quote:
Originally Posted by laynlo15 View Post
I will be doing something this winter on a low side fuel system.
me too, im reading and reading and reading

Quote:
Originally Posted by Umbriel View Post
I went with a Crawford Racing port injection system, great quality and Chris is super helpful and very nice. It isn't cheap but now I have 1400 hp worth of fuel if I ever want to go that far, which I will.
for $4,849.00Sale Price before buying a new intake manifold... holy moly. This might be over kill for us looking for 800 wheel.

Quote:
Originally Posted by JANNETTYRACING View Post
Looking at your build absolutely not, you will need all of the above.
im glad your in here, i enjoy reading your informational posts and the results you post. The more i research, the more I see support for your JMS "NO MATTER WHAT". Meaning we should all look into the jms voltage system if we have stock fuel pump, have stock fp and adding aux kit, upgrading fp, upgrading fp and aux kit. Everyone seems to swear by the jms.

Quote:
Originally Posted by EDFHOBBIES View Post
And what happen to the consensus saying use meth only for cooling do not rely on it for fueling that went out the door to or what?
I snipped part of your post, but I agree 100%. I just replaced a lt1 motor for ~12k. goes with the old saying "oil is cheap, motors are expensive". Well yes a sufficient fuel system is not cheap, but still no where near the cost of replacing the engine.
__________________
2016 Turbo Camaro - 730hp/780tq
2018 LTZ Z71 Redline Silverado - 381hp/420tq
Choda is offline   Reply With Quote
Old 10-18-2019, 12:19 PM   #23
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 14,690
Quote:
Originally Posted by EDFHOBBIES View Post
That's the way to do it..

It's funny back in the 5th gen days the Tuners were all saying do not slouch on the fuel system you will blow something up.. its not worth it. Spend the money on the fuel system do not go cheap on this part of the build!

What happen to that preaching? Seems like its more critical on the 6 gen since you can't just tune of off good AFR's. Low side or high side falls of even with good AFRs chances are somethings gonna break..

And what happen to the consensus saying use meth only for cooling do not rely on it for fueling that went out the door to or what?
I have been preaching it for ever and daily I guess no one hears me LOL
__________________
www.jannettyracing.com
Celebrating 34 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 10-18-2019, 12:22 PM   #24
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 14,690
Quote:
Originally Posted by Choda View Post
im glad your in here, i enjoy reading your informational posts and the results you post. The more i research, the more I see support for your JMS "NO MATTER WHAT". Meaning we should all look into the jms voltage system if we have stock fuel pump, have stock fp and adding aux kit, upgrading fp, upgrading fp and aux kit. Everyone seems to swear by the jms.
Always glad to help, don't hesitate to call me if you need help.

Ted.
__________________
www.jannettyracing.com
Celebrating 34 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 10-18-2019, 12:27 PM   #25
Umbriel
 
Drives: 2016 Camaro SS
Join Date: Sep 2018
Location: Bartlett, TN
Posts: 714
Quote:
Originally Posted by Choda View Post


for $4,849.00Sale Price before buying a new intake manifold... holy moly. This might be over kill for us looking for 800 wheel.
The fuel system and the Procharger intake with port injection bungs was right at $7800 but now I can do whatever I want and never have to worry. I have a forged 416 short block, boost cam from GPI, chromoly driveshaft, GeForce axles going in with the fuel system and will be running a F1-a Procharger on 18+ pounds looking for 1000 rwhp. These cars are not cheap to go fast in.
Umbriel is offline   Reply With Quote
Old 11-05-2019, 02:04 AM   #26
zepol9
 
Drives: 2016 Camaro 2SS NGM
Join Date: Jun 2014
Location: ca
Posts: 164
please tell me i dont have to remove the passenger rear wheel asembly to drill and tap the dam thing HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
zepol9 is offline   Reply With Quote
Old 11-05-2019, 09:35 PM   #27
Choda
 
Drives: Turbo 6.2
Join Date: Feb 2019
Location: Buffalo
Posts: 110
pic? you shouldnt have to remove the wheel to drill and tap the tank.
__________________
2016 Turbo Camaro - 730hp/780tq
2018 LTZ Z71 Redline Silverado - 381hp/420tq
Choda is offline   Reply With Quote
Old 11-06-2019, 12:24 AM   #28
zepol9
 
Drives: 2016 Camaro 2SS NGM
Join Date: Jun 2014
Location: ca
Posts: 164
ok ill post in a bit
zepol9 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:21 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.