[Exia1717]

DRL issues
Hi there, I'm having a bit of an issue and I was wondering if anyone here might be able to point me towards a solution. My driver's side DRLs connection from the wire harness got pulled out when I has some body Drlwork done so I put the wires back where they were supposed to be (the black wire and purple wire) . The light doesn't come on when the car's automatic light controls are on but the other three come on. When I manually turn on the lights, all of the lights power up but the drivers side drl is noticeably brighter and the other three drls dim somewhat
think there is a problem with the power wire because when I swapped the driver's and passengers drl power wires, the problem just transfers to the passenger side, exhibiting all the same behaviors. Any advice would be appreciated. Thanks in advance

[arpad_m]

Very expressive overlays you have there

Here is the DRL schematic for cars with the T4F (uplevel headlights) option, hope it helps you troubleshoot the wiring:

[Exia1717]

Thank you, I will see if I can narrow down the problem abit more.

[Rock-It Man]

Not sure what you mean by "pulled the wires out", but it's possible that a contact was broken inside the connector from strain on the wire.

[Exia1717]

I thought that as well. I disassembled the connector and reinserted the wire. It's turning on but It's really bright and doesn't function with the automatic light controls anymore. I was thinking about just replacing the entire harness but I cant seem to find the part anywhere.