06-18-2016, 11:26 PM | #1 |
Drives: 2016 Camaro 2SS 6spd Join Date: Jun 2016
Location: Bradenton, FL
Posts: 13
|
Driver information center - Engine off
How do you access the info section of the driver information center with the engine off? I just get a message "start vehicle to view application". I want to look at tire pressures, trip odometers, engine oil life, etc. without starting the engine. I was able to do this before, but I don't know why I can't now.
|
06-18-2016, 11:53 PM | #2 |
Drives: 2016 Chevy Camaro Join Date: Feb 2016
Location: Fallbrook CA
Posts: 245
|
I'm not sure what you mean, but if you hold down the start button (without pushing in the clutch, I'm guessing break on an auto) it will put the car into a diagnostic mode which will give you access to everything you have access to with the engine running.
Whiskey |
06-19-2016, 12:46 AM | #3 |
Drives: 2016 Camaro 2SS 6spd Join Date: Jun 2016
Location: Bradenton, FL
Posts: 13
|
Thank you Whiskey! That's what I was looking for. I was just pressing the engine start/stop button. I see now that pressing the button puts the car in "acc" and holding the button puts the car in "on". The on position allows access to the information I was looking for. It's a big technology step moving from my old 97 Trans am to the 2016 Camaro...
|
|
|
Post Reply
|
|
|