02-14-2017, 07:48 PM | #1 |
Drives: 2012 ZL1 Join Date: Apr 2015
Location: Kitchener ON, Canada
Posts: 176
|
Question about lingenfelter 630hp kit
So these are the mods included in the 630 hp kit-
Package Includes: - 2.55 inch diameter steel supercharger drive pulley - powder coated black - 8 rib - 8 rib serpentine belt - Lingenfelter LS9 solid supercharger isolator coupling - Port and polish supercharger snout - Lingenfelter high flow air intake kit - 160 degree thermostat - Increased boost level 10 - 12 psi or 3 - 4 psi over stock - Professional engine modifications, testing & PCM tuning - Chassis dyno report before & after installation - Excellent drivability, highway mileage not adversely affected - Lingenfelter certificate of authenticity - Lingenfelter 1 year/ 12,000 mile warranty on added components Mods I have -2.85" -ported SC inlet -160 tstat -rotofab intake -rotofab ic reservoir -SLP headers My question is why doesn't the 630 kit come with injectors? I plan on going 2.55" and custom tune and am wondering if I will need injectors or am I borderline? I only will have the upper pulley, should I go with colder plugs as well? Thanks guys !
__________________
2012 ZL1 preproduction car #13 ROTO-FAB intake / IC reservoir , 2.85" upper , ported inlet |
02-14-2017, 08:07 PM | #2 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
It has been done, that is, having a 2.55 on stock injectors but it is a very bad idea in my and many many others' opinion. Definitely get injectors for your car if you are going to 18% OD or more.
|
02-14-2017, 08:32 PM | #3 |
Drives: 2012 ZL1 Join Date: Apr 2015
Location: Kitchener ON, Canada
Posts: 176
|
So why doesn't the 630hp lingenfelter kit come with injectors? Is 2.55" that close to maxing out but LPE just gambles on it?
__________________
2012 ZL1 preproduction car #13 ROTO-FAB intake / IC reservoir , 2.85" upper , ported inlet |
02-14-2017, 10:41 PM | #4 |
"BEASTM*DE"
|
I have this kit on my car the only exception is I don't have header's...Stock injectors work fine with this kit, the headers should not make a difference...My car reacts better with this kit than it did stock in all performance aspects...Use the colder plug as well...
__________________
Vengeance Racing Stage 1 Kit 575rwhp, 569 rwtq...
Rims powder coated gloss black...BFG'S Comp 2 A/S... Dual 10" Kicker Comp S Subs 1200w... |
02-15-2017, 08:00 AM | #5 |
Drives: 2012 ZL1 Join Date: Apr 2015
Location: Kitchener ON, Canada
Posts: 176
|
Thanks ! I have done some research on here and CTSV forums and it seems like lots of people are on stock injectors with no issues. What plugs should I go with ?
__________________
2012 ZL1 preproduction car #13 ROTO-FAB intake / IC reservoir , 2.85" upper , ported inlet |
02-16-2017, 12:32 AM | #6 |
"BEASTM*DE"
|
My kit came with NKG TR6 plugs and I have not had a single problem out of the kit...
__________________
Vengeance Racing Stage 1 Kit 575rwhp, 569 rwtq...
Rims powder coated gloss black...BFG'S Comp 2 A/S... Dual 10" Kicker Comp S Subs 1200w... |
|
|
|
|