[breakskeet]

Originally Posted by Alain

Thanks !!! I want a hard copy and of course they are sold out. I requested to be notified when they are back in stock.

I could have sworn I searched that very same website when I first got the car and they didn’t have anything yet.

Thank you for the link.

Trust me, Get the manual on a thumb drive. Its probably 4 big books if you order the hard copy like it is for the Corvette. The thumb drive you can open on any windows computer and print the page(s) you need. The contents pages are click searchable so you can click the link and go right to the page. No worry about ripping pages and getting oil and grease all over the books. I bet you will be waiting a very long time for them to be available in hard copy anyway.

[Rnovrit]

Be prepared for a big heavy box when it arrives. I have the factory shop manual for mine. It is 8 volumes.

[waterman]

Originally Posted by breakskeet

Trust me, Get the manual on a thumb drive. Its probably 4 big books if you order the hard copy like it is for the Corvette. The thumb drive you can open on any windows computer and print the page(s) you need. The contents pages are click searchable so you can click the link and go right to the page. No worry about ripping pages and getting oil and grease all over the books. I bet you will be waiting a very long time for them to be available in hard copy anyway.

Thanks.

Originally Posted by Rnovrit

Be prepared for a big heavy box when it arrives. I have the factory shop manual for mine. It is 8 volumes.

Ouch!

[Alain]

Originally Posted by breakskeet

Trust me, Get the manual on a thumb drive. Its probably 4 big books if you order the hard copy like it is for the Corvette. The thumb drive you can open on any windows computer and print the page(s) you need. The contents pages are click searchable so you can click the link and go right to the page. No worry about ripping pages and getting oil and grease all over the books. I bet you will be waiting a very long time for them to be available in hard copy anyway.

I don’t have a windows operating system computer. I don’t have a computer st all for that matter. I would difinitely get the thumb drive if I had a pc.

Last time I checked the hard copy was available but it’s pricey as hell $350 or so if memeory serves me right. Expensive!!!

[BoostinFD]

Originally Posted by Alain

I don’t have a windows operating system computer. I don’t have a computer st all for that matter. I would difinitely get the thumb drive if I had a pc.

Last time I checked the hard copy was available but it’s pricey as hell $350 or so if memeory serves me right. Expensive!!!

Sorry for the dumb question... but how can you not have a pc at all? It's 2018... well 19 in a few days

[Alain]

Originally Posted by BoostinFD

Sorry for the dumb question... but how can you not have a pc at all? It's 2018... well 19 in a few days

Everything and anything I need to do online I can do with my phone.

I’m not in school anymore so there’s no need for me to spend money on one.

[arpad_m]

Originally Posted by Alain

I don’t have a windows operating system computer. I don’t have a computer st all for that matter. I would difinitely get the thumb drive if I had a pc.

Last time I checked the hard copy was available but it’s pricey as hell $350 or so if memeory serves me right. Expensive!!!

The hard copy is expensive because the manual has 9392 pages

[SHE'Z 18]

Originally Posted by 777Jackpot777

Attachment 959412


Don’t forget when you remove stock lid follow this tourqe pattern, and bolt them back down to 89 in-lbs. Seems like a lot of work just to remove the baffle in lid but hey it may be worth it to you.

Good stuff here!!! Do you happen to also have the torque pattern diagram for the supercharger? I believe that's 89 ft. Lbs. As well.

Thanks!!!

[kwav8r]

Originally Posted by SHE'Z 18

I believe that's 89 ft. Lbs. As well.

It's 89 INCH lbs.- you go ft.lbs. and you'll be snapping the studs off.

Here's the sequence (you'll need to scroll down a bit):
https://www.corvetteforum.com/forums...l#&gid=1&pid=5

[SHE'Z 18]

Originally Posted by kwav8r

It's 89 INCH lbs.- you go ft.lbs. and you'll be snapping the studs off.

Here's the sequence (you'll need to scroll down a bit):
https://www.corvetteforum.com/forums...l#&gid=1&pid=5

Thanks Kwav8r,
And yes, I definately meant to say "in/lbs." FT/LBS would have resulted in very bad things for sure. I checked the link that you provided, but I only found the tighten sequence for the SC lid. Did I miss the post regarding the sequence for the supercharger itself? For the catch can install, it requires the SC to be loosened and lifted.

Thanks in advance..

[kwav8r]

Originally Posted by SHE'Z 18

Thanks Kwav8r,
And yes, I definately meant to say "in/lbs." FT/LBS would have resulted in very bad things for sure. I checked the link that you provided, but I only found the tighten sequence for the SC lid. Did I miss the post regarding the sequence for the supercharger itself? For the catch can install, it requires the SC to be loosened and lifted.

Thanks in advance..

Ah yes, another Catch Can convert, did the same with mine a little over a year ago. Here's the link for the S/C tightening (scroll down a little).

https://www.corvetteforum.com/forums...lt-torque.html

[SHE'Z 18]

Originally Posted by kwav8r

Ah yes, another Catch Can convert, did the same with mine a little over a year ago. Here's the link for the S/C tightening (scroll down a little).

https://www.corvetteforum.com/forums...lt-torque.html

That's it!! Thanks Brother!!!