Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions
Reload this Page E-Force Self Install...


Bigwormgraphix


Post Reply
Page 7 of 18 « First 3456 7 89101117 Last »
 
Thread Tools
Old 03-29-2017, 01:17 PM   #85
TECHTURTLE

 
TECHTURTLE's Avatar
 
Drives: 2016 Camaro 2SS
Join Date: Dec 2013
Location: OTP Atlanta
Posts: 862
Response from shop for install price.

I am out of the country attending Custom Show Emirates in Abu Dhabi until Tuesday, April 4th. I will respond to all messages as soon as possible.
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation

Added
Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear.
TECHTURTLE is offline   Reply With Quote
Old 03-29-2017, 01:24 PM   #86
brettman

 
brettman's Avatar
 
Drives: 2016 Camaro SS
Join Date: Mar 2017
Location: Cleveland, Ohio
Posts: 912
Quote:
Originally Posted by TECHTURTLE View Post
Super important step in the install.... Brag!

1. Buy red supercharger decal from Phastek.
2. Clean your hood.
3. Mask area with painter's tape and measure.
4. Apply decal.
5. Say, Yeah Buddy..

Suddle,Nice..But you could.......
Attached Images
 
__________________
2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster.

Car Journal http://www.camaro6.com/forums/showthread.php?t=490975

SC build http://www.camaro6.com/forums/showthread.php?t=492656

Drive, Ride, Fly It Like You Stole It

GO BIG OR GO HOME
Last edited by brettman; 03-29-2017 at 01:52 PM.
brettman is offline   Reply With Quote
Old 03-29-2017, 01:33 PM   #87
MR 45TH

 
MR 45TH's Avatar
 
Drives: 2018 ZL1
Join Date: Oct 2011
Location: Huntingtown, MD
Posts: 1,138
Quote:
Originally Posted by brettman View Post
Nice..But you could.......
I like that! Where did you find that?
__________________
2018 ZL1…Many mods to come
MR 45TH is offline   Reply With Quote
Old 03-29-2017, 01:49 PM   #88
brettman

 
brettman's Avatar
 
Drives: 2016 Camaro SS
Join Date: Mar 2017
Location: Cleveland, Ohio
Posts: 912
Quote:
Originally Posted by MR 45TH View Post
I like that! Where did you find that?

Emblempros, they have ad here, made it just (size) I wanted Great guys.
__________________
2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster.

Car Journal http://www.camaro6.com/forums/showthread.php?t=490975

SC build http://www.camaro6.com/forums/showthread.php?t=492656

Drive, Ride, Fly It Like You Stole It

GO BIG OR GO HOME
brettman is offline   Reply With Quote
Old 03-29-2017, 02:21 PM   #89
TECHTURTLE

 
TECHTURTLE's Avatar
 
Drives: 2016 Camaro 2SS
Join Date: Dec 2013
Location: OTP Atlanta
Posts: 862
Quote:
Originally Posted by brettman View Post
Suddle,Nice..But you could.......
That looks great! I thought about something like that but I didn't want it raised up. The guys at Emblem Pros make some really nice stuff.
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation

Added
Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear.
TECHTURTLE is offline   Reply With Quote
Old 03-29-2017, 03:09 PM   #90
TECHTURTLE

 
TECHTURTLE's Avatar
 
Drives: 2016 Camaro 2SS
Join Date: Dec 2013
Location: OTP Atlanta
Posts: 862
Rattle can painted the red parts of the supercharger red hot to match the rest of the car. Their red was close but I had some left over paint and figured what the heck.
Attached Images
 
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation

Added
Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear.
TECHTURTLE is offline   Reply With Quote
Old 03-29-2017, 09:50 PM   #91
SC88
Twin Turbo
 
SC88's Avatar
 
Drives: 2016 2SS
Join Date: Jul 2016
Location: Illinois
Posts: 290
Do you plan on replacing the spark plugs? If so it's a lot easier to do before you run the hoses and mount the reservoir.
__________________
Boost, Boost & More Boost
Instagram = BoostedSS
SC88 is offline   Reply With Quote
Old 03-30-2017, 08:13 AM   #92
TECHTURTLE

 
TECHTURTLE's Avatar
 
Drives: 2016 Camaro 2SS
Join Date: Dec 2013
Location: OTP Atlanta
Posts: 862
Quote:
Originally Posted by SC88 View Post
Do you plan on replacing the spark plugs? If so it's a lot easier to do before you run the hoses and mount the reservoir.
I wasn't going to because the directions don't call for it... But there are other things left out of the directions so I'll call their Tech Line today and ask.

I know a lot of people go with a cooler plug but if the Edelbrock tune runs stock plugs that's what I'll go with.
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation

Added
Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear.
TECHTURTLE is offline   Reply With Quote
Old 03-30-2017, 09:32 AM   #93
oneredry
HYPER SS
 
oneredry's Avatar
 
Drives: 2016 Supercharged 2SS
Join Date: Feb 2014
Location: Troy OH
Posts: 1,252
Quote:
Originally Posted by TECHTURTLE View Post
I wasn't going to because the directions don't call for it... But there are other things left out of the directions so I'll call their Tech Line today and ask.

I know a lot of people go with a cooler plug but if the Edelbrock tune runs stock plugs that's what I'll go with.
That was my thought. Magnuson didn't call for colder plugs either. (not like I'll be beating on my car on a daily basis either) but if others are using it and have 1,000+ more miles with no issues, I may switch.
__________________
Ordered: 1/15/2016
2000 status 02/01/16
3000 status 02/29/16
3400 status 03/07/16 TPW of 03/14/16
4200 status 03/17/16 in transit!
Delivered 03/23/16
2SS Hyper Blue | 6M | NPP | Mag ride | ceramic white Int. | Black out bow ties | P3 Gauge| Front splitter. | 6 pot upgraded brembo brakes. | Magnuson Supercharger/95MM pulley | Rotofab Intake | ZL1 side skirts | HRE FF04 wheels - Michelin PSS4 | ZL1 add ons rock guards and lift points. | AWE touring - resinated catback with link pipes.
oneredry is offline   Reply With Quote
Old 03-30-2017, 12:43 PM   #94
Garys16SS
 
Garys16SS's Avatar
 
Drives: 2016 SS, BLACK, MANUAL
Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
Quote:
Originally Posted by TECHTURTLE View Post
I thought about not removing it, but I didn't want to run into the possible situation of not having the clearance to get the balance fully out. And, I certainly wouldn't have been able to get my torch in there to heat that bolt. Maybe with one of those mini torches...
I used a heat gun and the bolt came right off after a strong "twist". Maybe this info will be helpful to others.
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come.
2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller.
2003 SSR red,
2016 Vette
Garys16SS is offline   Reply With Quote
Old 03-30-2017, 02:15 PM   #95
TECHTURTLE

 
TECHTURTLE's Avatar
 
Drives: 2016 Camaro 2SS
Join Date: Dec 2013
Location: OTP Atlanta
Posts: 862
Quote:
Originally Posted by Garys16SS View Post
I used a heat gun and the bolt came right off after a strong "twist". Maybe this info will be helpful to others.
Not pulling the fan would save a lot of work plus no need to drain the coolant.
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation

Added
Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear.
TECHTURTLE is offline   Reply With Quote
Old 03-30-2017, 02:16 PM   #96
TECHTURTLE

 
TECHTURTLE's Avatar
 
Drives: 2016 Camaro 2SS
Join Date: Dec 2013
Location: OTP Atlanta
Posts: 862
Okay so I spoke with Edelbrock today and they said no need to change out the plugs. I guess you might have to if you are trying to squeeze out every HP you can but with their tune... No need.
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation

Added
Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear.
TECHTURTLE is offline   Reply With Quote
Old 03-30-2017, 03:11 PM   #97
Block8head
 
Block8head's Avatar
 
Drives: 2016 Vert 2SS/2018 ZL1 Vert Red Hot
Join Date: Dec 2016
Location: Mars
Posts: 252
are you using stock exhaust?
Block8head is offline   Reply With Quote
Old 03-30-2017, 03:35 PM   #98
RuthleSSchevy
 
RuthleSSchevy's Avatar
 
Drives: 2016Camaro+1968Chevelle+1954BelAir
Join Date: Feb 2013
Location: NH
Posts: 149
Quote:
Originally Posted by TECHTURTLE View Post
Okay so I spoke with Edelbrock today and they said no need to change out the plugs. I guess you might have to if you are trying to squeeze out every HP you can but with their tune... No need.
Im surprised they dident recommend gapping the stock plugs?
__________________
"Lead me, follow me, or get out of my way." GGSP
RuthleSSchevy is offline   Reply With Quote
 
Post Reply
Page 7 of 18 « First 3456 7 89101117 Last »

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:31 AM.

Contact Us - CAMARO6 - Archive - Privacy Statement - Terms of Service / DMCA Policy - Top

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.