Diode Dynamics' 2017 SEMA Booth Build: 2SS Camaro! - Page 5

3761LE · 10-12-2017, 08:33 PM

Quote:

Originally Posted by Diode Dynamics

We added the GM Smoked ZL1 1LE Third Brake from ThatCamaroPartsGuy.com

It's a must have IMO!

I have your side markers with clear lenses on my car and have to say they are next level! I have to ask, have you guys considered producing a LED third brake light to match your company's LED side markers?

The ZL1 1LE third brake light, which is currently the upgrade has the dark border that really isn't cohesive with my side markers.

Diode Dynamics · 10-13-2017, 09:57 AM

Quote:

Originally Posted by 3761LE

I have your side markers with clear lenses on my car and have to say they are next level! I have to ask, have you guys considered producing a LED third brake light to match your company's LED side markers?

The ZL1 1LE third brake light, which is currently the upgrade has the dark border that really isn't cohesive with my side markers.

Thank you for your support!!

We probably won't address the third brake light, since the GM option already exists. I hear you on the black border for the ZL1 1LE unit, but it's definitely a major upgrade from the OEM red units

Nick C.

G Fo12ce · 10-13-2017, 01:23 PM

Is there a plug and play solution for the front turn signal in the headlight housing to remove the orange reflection? It is very subtle on this car but something I would buy if it was offered.

Diode Dynamics · 10-13-2017, 01:32 PM

Quote:

Originally Posted by G Fo12ce

Is there a plug and play solution for the front turn signal in the headlight housing to remove the orange reflection? It is very subtle on this car but something I would buy if it was offered.

We replaced our turn signals with our XP80 amber LEDs. I can't recall if they spliced in resistors or not. I imagine they had to do so to prevent hyperflash.

Nick C.

3761LE · 10-13-2017, 06:55 PM

Quote:

Originally Posted by Diode Dynamics

Thank you for your support!!

We probably won't address the third brake light, since the GM option already exists. I hear you on the black border for the ZL1 1LE unit, but it's definitely a major upgrade from the OEM red units

Nick C.

Thanks for the reply Nick.

That's a shame. I think a complete set including side markers, third brake light, and DRL's would likely be a hot seller.

Cheers

Diode Dynamics · 10-16-2017, 03:30 PM

10/9/2017 - Dropped the Camaro off at Weber Chevrolet here in St. Louis for TSB #17-NA_115, which fixes an intermittent steering issue that can cause the electronic steering to make the car pull to the left or right regardless of how perfect your alignment is.

It's somewhat common, but Weber Chevrolet flashed the sensors and it was 100% good to go afterwards.

Dropped the car off at 9:30am, and it was done by 2pm.

Best Chevrolet dealership service experience I've ever had. Kudos to the service team at Weber for their help!

Nick C.

Diode Dynamics · 10-24-2017, 11:17 AM

We took the Camaro to a few local events here in St. Louis, here's a few shots from those events on October 14th:

The first one was put on by Grade 8 Car Culture here in St. Louis to raise money for Driven to Cure

Then we headed over to The Place for a special screening of Amazon's "The Grand Tour" put on by Amazon & Cars & Coffee STL

Brought our Procharged F-150 2016 SEMA Build out as well!

Here's a random shot I took of it while walking from our production/R&D building to our main operations building:

The ride height is perfect with the KW V3's installed!

It's currently at Vinyl Images getting our build partner logos added before our team brings the car out to Vegas for our booth at the 2017 SEMA Show.

Diode Dynamics · 10-24-2017, 11:22 AM

10/24/2017 -Updated Photos

Here's an engine bay shot with our SLP Blackwing® Cold-Air Intake System installed:

kttxz06 · 10-24-2017, 01:49 PM

Just ordered your tinted side markers and switch back DRL's.

Diode Dynamics · 10-24-2017, 01:59 PM

Quote:

Originally Posted by kttxz06

Just ordered your tinted side markers and switch back DRL's.

Thank you for your support!!

Nick C.

FATTEMUNK · 11-04-2017, 02:36 AM

Hi, tried to PM you but your inbox is full. Do you guys sell replacement sidemarkers if one has been damaged. Specifically a smoked passenger front? Thanks, please pm me with your response so I get the email notification lol.

Diode Dynamics · 11-09-2017, 10:25 AM

Quote:

Originally Posted by FATTEMUNK

Hi, tried to PM you but your inbox is full. Do you guys sell replacement sidemarkers if one has been damaged. Specifically a smoked passenger front? Thanks, please pm me with your response so I get the email notification lol.

Hello there!

We are still waiting for our vendor account to be reactivated. Unfortunately, it expired when we were at the 2017 SEMA Show.

Please give us a call and we will replace that for you: (314) 205-3033

Nick C.

FATTEMUNK · 11-09-2017, 06:31 PM

Quote:

Originally Posted by Diode Dynamics

Hello there!

We are still waiting for our vendor account to be reactivated. Unfortunately, it expired when we were at the 2017 SEMA Show.

Please give us a call and we will replace that for you: (314) 205-3033

Nick C.

Hey, I already got one ordered by emailing you guys. No worries and thanks for the fast and easy process for replacement! Also still waiting on your RGB DRL and other stuff so I can have a full DD setup. Hurry Up lol!

Diode Dynamics · 11-10-2017, 08:48 AM

Quote:

Originally Posted by FATTEMUNK

Hey, I already got one ordered by emailing you guys. No worries and thanks for the fast and easy process for replacement! Also still waiting on your RGB DRL and other stuff so I can have a full DD setup. Hurry Up lol!

Should be released soon! Thank you for your patience!

Nick C.

10-13-2017, 01:23 PM	#59
G Fo12ce Drives: '16 2SS Join Date: Nov 2009 Location: Orange County CA Posts: 762	Is there a plug and play solution for the front turn signal in the headlight housing to remove the orange reflection? It is very subtle on this car but something I would buy if it was offered. __________________ My Intro Post \| My Order \| My Ordering Guide TJCR2Q \| 2SS Red Hot\|Adrenaline Red\|MX0 A8\|56R Wheels\|5ZU Blade Spoiler\|NPP Exhaust\|F55 MRC\|IO6 Nav • 4/06/16 1100 Ordered (waiting for 5ZU acceptance) • 4/19/16 2000 Accepted with 5ZU • 4/23/16 3000 TPW:5/16/16 • 5/06/16 3100 • 5/13/16 3400 Broadcast Sheet • 5/24/16 3800 Vehicle Produced • 5/25/16 4B00 Bayed • 5/27/16 4300 Intermediate Delivery • 7/9/16 Delivered!

10-16-2017, 03:30 PM	#62
Diode Dynamics Drives: Camaro Lighting Experts Join Date: Feb 2012 Location: St. Louis, MO Posts: 2,429	10/9/2017 - Dropped the Camaro off at Weber Chevrolet here in St. Louis for TSB #17-NA_115, which fixes an intermittent steering issue that can cause the electronic steering to make the car pull to the left or right regardless of how perfect your alignment is. It's somewhat common, but Weber Chevrolet flashed the sensors and it was 100% good to go afterwards. Dropped the car off at 9:30am, and it was done by 2pm. Best Chevrolet dealership service experience I've ever had. Kudos to the service team at Weber for their help! Nick C. __________________ John C. Diode Dynamics Follow Us: FB // IG // YT // TikTok

10-24-2017, 11:17 AM	#63
Diode Dynamics Drives: Camaro Lighting Experts Join Date: Feb 2012 Location: St. Louis, MO Posts: 2,429	We took the Camaro to a few local events here in St. Louis, here's a few shots from those events on October 14th: The first one was put on by Grade 8 Car Culture here in St. Louis to raise money for Driven to Cure Then we headed over to The Place for a special screening of Amazon's "The Grand Tour" put on by Amazon & Cars & Coffee STL Brought our Procharged F-150 2016 SEMA Build out as well! Here's a random shot I took of it while walking from our production/R&D building to our main operations building: The ride height is perfect with the KW V3's installed! It's currently at Vinyl Images getting our build partner logos added before our team brings the car out to Vegas for our booth at the 2017 SEMA Show. __________________ John C. Diode Dynamics Follow Us: FB // IG // YT // TikTok

10-24-2017, 11:22 AM	#64
Diode Dynamics Drives: Camaro Lighting Experts Join Date: Feb 2012 Location: St. Louis, MO Posts: 2,429	10/24/2017 -Updated Photos Here's an engine bay shot with our SLP Blackwing® Cold-Air Intake System installed: __________________ John C. Diode Dynamics Follow Us: FB // IG // YT // TikTok

10-24-2017, 01:49 PM	#65
kttxz06 Drives: '18 Zl1. '18 GT350. Join Date: Dec 2016 Location: Katy Posts: 2,104	Just ordered your tinted side markers and switch back DRL's. __________________ There's only 2 people I trust. 1 of them is me, the other's not you. 2018 Zl1. 1199 RWHP/931 TQ.

11-04-2017, 02:36 AM	#67
FATTEMUNK Drives: 600whp 2016 C63 AMG/ 2018 SS 1LE Join Date: Apr 2017 Location: Bay Area Posts: 193	Hi, tried to PM you but your inbox is full. Do you guys sell replacement sidemarkers if one has been damaged. Specifically a smoked passenger front? Thanks, please pm me with your response so I get the email notification lol.

User Name		Remember Me?
Password