Huron Speed 6th Gen SS/ZL1 Twin Turbo System Introduction - Now Available! - Page 4

Umbriel · 10-28-2019, 01:33 PM

Quote:

Originally Posted by viurniel

Goertz (G1Pro) had a sheet metal manifold on their site about two months ago- like the Procharger one - for less $$.

Yeah I looked there and didn't see anything like that now.

viurniel · 10-28-2019, 01:40 PM

You can find G1 him here with username Black_c7

NeverDie · 10-28-2019, 01:44 PM

Quote:

Originally Posted by Huron Speed

Well to go larger we need to use the space where the crash bar is so for thicker you need to ditch the front bumper bar. If you wish the retain the front bumper bar we can do the standard intercooler which is still extremely efficient! Add in some meth for added cooling if you like for the extra hot days!

No interest in another point of failure such as meth pump or injector. That's a poor band-aid.

Have you looked into sourcing a wider/thicker core for the IC possibly to mitigate the crash bar blocking the standard one and loss of rigidity/safety from removing it? I know BMW uses one this style, or possibly AWIC? A more permanent and reliable source of heat management would be strongly preferred.

I'm also interested in seeing the dyno numbers, chart, and AFR from the base kit since I would expect that to be part of the launch materials...

Huron Speed · 10-28-2019, 02:27 PM

If some demand, we will consider doing a billet intake manifold option. I am quite confident we could keep the pricing under $3k. Our sister company has CNC machines in house we use for any CNC products so that helps keep the cost down!

Huron Speed · 11-04-2019, 03:27 PM

Here are a couple different turbo options that just came in from Comp for a few upcoming builds.

6262 with no upgrades, just the base form with satin covers for a SS car with stock bottom end LT1

6467 has most of the bells and whistles for a ZL1 build with:
Polished compressor housings
Anodized compressor wheels
Anodized backing plates
Anodized bearing housings

Will have another cool example of the 6" Intercooler upgrade finishing up this week as well to show you guys!

Umbriel · 11-04-2019, 03:43 PM

This is getting me excited about this. As soon as I can get my stuff squared this week I'll be contacting you about the order you and I talked about via email, sorry it is taking so long but I need to get this thing pulled and sent so I can get the funds for this.

Huron Speed · 11-04-2019, 05:02 PM

Quote:

Originally Posted by Umbriel

This is getting me excited about this. As soon as I can get my stuff squared this week I'll be contacting you about the order you and I talked about via email, sorry it is taking so long but I need to get this thing pulled and sent so I can get the funds for this.

Look forward to this build with you, going to be a sweet one for sure!

ZarusSS · 11-04-2019, 06:28 PM

Are your parts sourced out of country?

Umbriel · 11-04-2019, 06:29 PM

Quote:

Originally Posted by Huron Speed

Look forward to this build with you, going to be a sweet one for sure!

Yep, can't wait!

Sent from my SM-G955U using Tapatalk

Huron Speed · 11-05-2019, 07:02 AM

Quote:

Originally Posted by ZarusSS

Are your parts sourced out of country?

All components included come from the USA from big name companies backed by warranties. Currently we are not including any overseas components with these kits however we can in the future if the market demands a lower price point. Our piping all comes backed by our Lifetime Warranty to the original purchaser. Some pieces such as silicone and t-bolts come from overseas but we back those with a warranty on our end as well. Intercooler options come from USA. Our upcoming Billet Intake Manifold option all designed in house as well with our sister company and machined at their facility 15 miles from us, same with all other billet pieces in the kit. We do our best to supply the best quality possible and back it all with warranties while supporting USA business and workers as best we can. Some pieces unfortunately must come from overseas like mentioned above without driving the cost up exponentially so we balance it to limit where possible to bring you all the very best quality at a great price point.

Huron Speed · 11-05-2019, 07:03 AM

Quote:

Originally Posted by Umbriel

Yep, can't wait!

Sent from my SM-G955U using Tapatalk

One VERY cool piece showing up from Texas tomorrow! Will post it up once it arrives! #Bell

Umbriel · 11-05-2019, 01:14 PM

Quote:

Originally Posted by Huron Speed

One VERY cool piece showing up from Texas tomorrow! Will post it up once it arrives! #Bell

Huron Speed · 11-06-2019, 12:41 PM

The levels of customization on this kit is awesome!

Umbriel · 11-06-2019, 12:48 PM

I'm assuming that blue one is mine? Turned out really good, better than I was expecting.

11-04-2019, 03:27 PM	#47
Huron Speed Drives: 2012 45th SS Join Date: Sep 2010 Location: Michigan Posts: 689	Here are a couple different turbo options that just came in from Comp for a few upcoming builds. 6262 with no upgrades, just the base form with satin covers for a SS car with stock bottom end LT1 6467 has most of the bells and whistles for a ZL1 build with: Polished compressor housings Anodized compressor wheels Anodized backing plates Anodized bearing housings Will have another cool example of the 6" Intercooler upgrade finishing up this week as well to show you guys! Attached Images

11-06-2019, 12:41 PM	#55
Huron Speed Drives: 2012 45th SS Join Date: Sep 2010 Location: Michigan Posts: 689	The levels of customization on this kit is awesome! Attached Images

10-28-2019, 01:40 PM	#44
viurniel @viurniel Drives: 19 ZLE A10, 15 2SS, 90 300ZXTT Join Date: May 2016 Location: Miami Posts: 409	You can find G1 him here with username Black_c7

10-28-2019, 02:27 PM	#46
Huron Speed Drives: 2012 45th SS Join Date: Sep 2010 Location: Michigan Posts: 689	If some demand, we will consider doing a billet intake manifold option. I am quite confident we could keep the pricing under $3k. Our sister company has CNC machines in house we use for any CNC products so that helps keep the cost down!

11-04-2019, 03:43 PM	#48
Umbriel Drives: 2016 Camaro SS Join Date: Sep 2018 Location: Bartlett, TN Posts: 1,121	This is getting me excited about this. As soon as I can get my stuff squared this week I'll be contacting you about the order you and I talked about via email, sorry it is taking so long but I need to get this thing pulled and sent so I can get the funds for this.

11-04-2019, 06:28 PM	#50
ZarusSS Drives: Chevy Camaro Join Date: May 2019 Location: East Coast Posts: 61	Are your parts sourced out of country?

11-06-2019, 12:48 PM	#56
Umbriel Drives: 2016 Camaro SS Join Date: Sep 2018 Location: Bartlett, TN Posts: 1,121	I'm assuming that blue one is mine? Turned out really good, better than I was expecting.

User Name		Remember Me?
Password